Acer P1206P User Manual

Acer P1206P Manual

Acer P1206P manual content summary:

  • Acer P1206P | User Manual - Page 1
    Acer Projector P1101/P1101C/P1201/P1201B/ P1201i/P1201n/P1203P/P1203PB/ P1203Pi/P1206P/P1303PW Series User's Guide
  • Acer P1206P | User Manual - Page 2
    Copyright © 2011. Acer Incorporated. All Rights Reserved. Acer Projector P1101/P1101C/P1201/P1201B/P1201i/P1201n/P1203P/P1203PB/P1203Pi/P1206P/ P1303PW Series User's Guide Original Issue: 01/2011 Changes may be made periodically to the information in this publication without obligation to notify any
  • Acer P1206P | User Manual - Page 3
    document for future reference. Follow all warnings and instructions marked on the product. Turning the product off power outlet. • Unplug the power cord before removing the power supply unit from the projector. • If the system has multiple sources of power, disconnect power from the system by
  • Acer P1206P | User Manual - Page 4
    surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure
  • Acer P1206P | User Manual - Page 5
    performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those • Do not look into the projector's lens when the lamp is on. The bright may hurt your eyes. • Turn on the projector first and then signal sources •
  • Acer P1206P | User Manual - Page 6
    and follow all changing instructions. • Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module. • Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the
  • Acer P1206P | User Manual - Page 7
    't hear people speaking near you. Disposal instructions Do not throw this electronic device into acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp
  • Acer P1206P | User Manual - Page 8
    . • Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning: • Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. • To reduce the risk of fire or
  • Acer P1206P | User Manual - Page 9
    ) 9 Getting Started 11 Connecting the Projector (P1101/P1201/P1203P/P1206P/ P1303PW) 11 Connecting the Projector (P1101C/P1201B/P1203PB/ P1203Pi/P1201i/P1201n) 12 Turning the Projector On/Off 14 Turning on the Projector 14 Turning the projector off 15 Adjusting the Projected Image
  • Acer P1206P | User Manual - Page 10
    Setting 41 Alert Setting 41 Logout 42 Appendices 43 Troubleshooting 43 LED & Alarm Definition Listing 48 Replacing and cleaning the dust filters 49 Replacing the Lamp 50 Ceiling Mount Installation 51 Specifications 54 Compatibility modes 56 Regulations and safety notices 60
  • Acer P1206P | User Manual - Page 11
    chip DLP® projector. Outstanding features include: • DLP® technology • P1101/P1101C: Native 800 x 600 SVGA resolution P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/P1203P/P1206P series : Native 1024 x 768 XGA resolution P1303PW: Native 1280 x 800 WXGA resolution 4:3 / 16:9 aspect ratio supported (P1101
  • Acer P1206P | User Manual - Page 12
    with lens cap Power cord VGA cable Security card Acer Projector 2 x Batteries Carrying case (#A) (#B) 3J 8 S Quick Start Guide 3J ' Q 2 x Quick Start Guide 2 x User's Guide (Wireless CD Remote control (Wireless Quick Start Guide for P1101C/P1201B/P1203PB/ (#A for P1101/P1201/P1203P/ for
  • Acer P1206P | User Manual - Page 13
    English 3 Projector Overview Projector Outlook Front / upper side 1 6 7 8 2 9 3 4 10 5 # Description 1 Control panel 2 Ventilation Rear side (P1101/P1201/P1203P/P1206P/P1303PW Series) P1101/P1201/ P1203P/P1206P/ P1303PW 23 4 5 6789 11* 1 P1203P/P1206P/ P1303PW P1101/P1201 12* 13
  • Acer P1206P | User Manual - Page 14
    English 4 # Description # Description 1 Power socket 8 Audio input connector 2 USB connector 9 RS232 connector 3 HDMI connector 10 KensingtonTM lock port 4 Monitor loop-through output connector Below items are for P1203P/P1206P/ (VGA-Out) P1303PW only: 5 PC analog signal/HDTV/
  • Acer P1206P | User Manual - Page 15
    Type) 8 RS232 connector 13 Reset button 9 KensingtonTM lock port 14 Power LED for wireless Below items are for P1101C only: 15 HDMI connector 11 Audio output connector 16 1st USB connector (Type A) 12 USB connector (mini B Type) 17 2nd USB connector (Type A) 13 Reset button 14 Power LED
  • Acer P1206P | User Manual - Page 16
    LAMP Lamp Indicator LED 2 Keystone Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). 3 RESYNC 4 MENU Automatically synchronizes the projector . 5 POWER See the contents in "Turning the Projector On/Off" section. 6 TEMP Temp Indicator LED
  • Acer P1206P | User Manual - Page 17
    P1206P/ P1303PW) 2 1 English 3 7 4 5 8 6 9 11 10 12 13 14 15 17 16 18 19 21 20 22 23 25 24 26 27 # Icon Function Description 1 Infrared Sends signals to the projector This function is not supported in Japanese market. Empowering Unique Acer functions: eOpening, eView
  • Acer P1206P | User Manual - Page 18
    18 COLOR Press "COLOR" to adjust the color temperature of image. 19 VGA Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. 20 COMPONENT No function. 21 S-VIDEO To change source to S-Video. 22
  • Acer P1206P | User Manual - Page 19
    (Auto/4:3/16:9) ZOOM Zooms the projector display in or out. Laser button Aim the remote at the viewing screen, press and hold this button to activate the laser pointer. This function is not supported in Japanese market. Empowering key Unique Acer functions: eOpening, eView, eTimer, ePower
  • Acer P1206P | User Manual - Page 20
    S-Video. Press "VIDEO" to change source to composite video. Press "SD/USB A" to toggle between SD and USB A sources. This projector supports various file formats of photo/audio/ video. Press "HDMI™/DVI" to change source to HDMI™. USB B LAN/WiFi Press "USB B" to change source to USB mini B. Press
  • Acer P1206P | User Manual - Page 21
    Connecting the Projector (P1101/P1201/ P1203P/P1206P/P1303PW) Monitor VGA D-Sub RBG DVD player, Set-up Box, HDTV receiver 7 Video Output S-Video Output D-Sub DVD player USB HDM I 46 3 2 RBG 5 HDTV adapt er D-Sub HDM I D-Sub Y 8 VGA 9 10 RS232 RS232 12 1 W 11 R Audio Output
  • Acer P1206P | User Manual - Page 22
    jack/jack 10 3 RCA component cable 11 Audio cable Jack/RCA 12 LAN Cable 13(*) USB disk/stick USB WiFi adapter (P1201i) 14 USB cable (Type A to mini USB) Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the
  • Acer P1206P | User Manual - Page 23
    13 Note: "*" USB drive limitation, do not support power consumption over 500mA. Please have external power for USB device. English
  • Acer P1206P | User Manual - Page 24
    securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal
  • Acer P1206P | User Manual - Page 25
    indicator will turn solid red. Contact your local dealer or service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator
  • Acer P1206P | User Manual - Page 26
    English 16 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise the image: 1 Press the elevator foot release. (Illustration #1) 2 Raise the image to
  • Acer P1206P | User Manual - Page 27
    is positioned at a desired distance from the screen. • P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/P1203P/ P1206P series Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 69" and 76". P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi
  • Acer P1206P | User Manual - Page 28
    18 English P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/ P1203P/P1206P series Screen size Top Screen size Top Desired Distance (Min zoom) (m) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) (Max zoom) Diagonal (
  • Acer P1206P | User Manual - Page 29
    English 19 • P1303PW series Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 82" and 90". P1303PW series Note: Remind as below figure, the space
  • Acer P1206P | User Manual - Page 30
    20 English P1303PW series Screen size Top Screen size Top Desired Distance (Min zoom) (m) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) (Max zoom) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) 1.5 41 88 x 55 62 45 97 x
  • Acer P1206P | User Manual - Page 31
    size by adjusting distance and zoom P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/ P1203P/P1206P series A 50" iDmeasgireedsize D Height Form base to top of image 2.2 m C size of 50" set the projector at a distance 2 m and 2.2 m from the screen and adjust the zoom level accordingly.
  • Acer P1206P | User Manual - Page 32
    22 English P1101/P1101C/P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/ P1203P/P1206P series Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1x W (cm) x H (
  • Acer P1206P | User Manual - Page 33
    to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 50" set the projector at a distance 1.7 m and 1.8 m from the screen and adjust the zoom level accordingly.
  • Acer P1206P | User Manual - Page 34
    24 English P1303PW series Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1x W (cm) x H (cm) 65 x 40 86 x 54 108 x 67 129 x 81 151 x 94 172 x 108 194 x 121 215 x 135 258 x 162 323 x 202 388 x 242 431 x 269 538 x 337 646 x 404
  • Acer P1206P | User Manual - Page 35
    Press the menu button on the control pad to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and the menu button anytime to exit the menu and return to the Acer welcome screen.
  • Acer P1206P | User Manual - Page 36
    . Press " " key for more than one second to launch the Onscreen display main menu to modify its function. Press " " to launch "Acer eView Management" submenu. "Acer eView Management" is for display mode selection. Please refer to Onscreen Display Menus section for more detail. The 3D and 3D Sync
  • Acer P1206P | User Manual - Page 37
    27 English Acer ePower Management Press " " to launch "Acer ePower Management". "Acer ePower Management" provides user one shortcut to save lamp and projector life. Please refer to Onscreen Display section for more detail.
  • Acer P1206P | User Manual - Page 38
    English 28 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety the remote control or control panel again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Sub menu
  • Acer P1206P | User Manual - Page 39
    29 Color English Display Mode Wall color Brightness Contrast Color Temperature Degamma Color R Color G Color B Saturation There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. •
  • Acer P1206P | User Manual - Page 40
    the input image as full color range data. Note: "Saturation" and "Tint" functions are not supported under computer mode or HDMI (RGB) mode. Note: "HDMI Color Range" function is only supported under HDMI(RGB) mode. Image Projection mode • Front: The factory default setting. • Projection Location
  • Acer P1206P | User Manual - Page 41
    and "L.Box" funcions are supported in P1303PW. Automatically adjusts vertical ) The Manual Keystone funcion is unavailable image up. Frequency "Frequency" changes the projector's refresh rate to match the frequency of or overlapping image while wearing DLP 3D glasses, you may need to execute
  • Acer P1206P | User Manual - Page 42
    SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page L/R" is only available when DLP 3D is enabled. Note: There has reminder screen if 3D still enable when power on projector. Please adjust setting depended
  • Acer P1206P | User Manual - Page 43
    Management English ECO Mode High Altitude Dynamic Black Turn Off Mode Auto Shutdown Lamp Hour Elapse Lamp Reminding Lamp Hour Reset Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Choose "On" to
  • Acer P1206P | User Manual - Page 44
    exit the OSD menu. • Acer: The default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice: Before
  • Acer P1206P | User Manual - Page 45
    will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue. Note: This screen capture function is limited by 4:3 aspect ratio only. Note: For XGA models, to get best quality for you desired image, suggest
  • Acer P1206P | User Manual - Page 46
    number which will be accepted by projector anytime no matter what the Administrator Password is. • If losing this security card and number, please contact with an Acer service center. Lock User Startup Screen screen will be related with power on/off of Projector. (for P1203P/P1303PW/ P1206P only)
  • Acer P1206P | User Manual - Page 47
    English 37 Audio Volume • • Mute • • Power On/Off Volume • Alarm Volume • Press Press to decrease the volume. to increase the volume. Choose "On" to mute the volume. Choose "Off" to restore the volume. Select this function to adjust the notification volume when turning the projector on
  • Acer P1206P | User Manual - Page 48
    38 Language English Language Choose the multilingual OSD menu. Use the or key to select your preferred menu language. • Press to confirm the selection.
  • Acer P1206P | User Manual - Page 49
    LAN webpage management How to login in Open browser and enter the Server IP address by 192. 168. 0.100 to find below homepage of acer LAN webpage management. A password is needed to login in before using. Select a user. Administrator is with high authority that can process more operations such as
  • Acer P1206P | User Manual - Page 50
    , Control Panel, Networking Setting and Alert Setting. Note: Control Panel and Network Setting are only for Administrator account. Control Panel Enduser can control and adjust projector setting value via this page.
  • Acer P1206P | User Manual - Page 51
    Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply". Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right
  • Acer P1206P | User Manual - Page 52
    42 Logout After tap Logout, you will return to login page within 5 seconds. English
  • Acer P1206P | User Manual - Page 53
    43 Appendices English Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears •
  • Acer P1206P | User Manual - Page 54
    difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. 4 The screen of the • If you are using a Microsoft® Each has a different way to be reactivated. Refer to your computer's manual for detailed information. • If you are using an Apple® Mac® OS
  • Acer P1206P | User Manual - Page 55
    to 16:9 (wide) aspect ratio on your DVD player. 9 Image is too small • Adjust the zoom lever on the top of the projector. or too large • Move the projector closer to or further from the screen. • Press "MENU" on the remote control. Go to "Image - -> Aspect Ratio" and try different settings
  • Acer P1206P | User Manual - Page 56
    Message Reminder Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it
  • Acer P1206P | User Manual - Page 57
    47 Problems with the Projector English # Condition Solution 1 The projector stops responding If possible, turn off the projector, then to all controls unplug the power cord and wait at least 30 seconds before reconnecting power. 2 Lamp burns out or makes a popping sound When the lamp
  • Acer P1206P | User Manual - Page 58
    LED Red -- --- Turning off -- (cooling state) Turning off -- (cooling completed) Error (thermal failure) -- Error (fan lock failure) -- Error (lamp breakdown) Error (color Wheel fail) V Quick flashing Temp LED Red -- --- -- -- V Quick flashing --- Power LED Red Blue V -- --- Quick
  • Acer P1206P | User Manual - Page 59
    clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. (Normally 1000 hours is recommended, clean period will be depending on actual is broken, please contact your local dealer or service center to obtain a new filter. Dust Filter (Illustration #2)
  • Acer P1206P | User Manual - Page 60
    Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the
  • Acer P1206P | User Manual - Page 61
    English 51 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base.
  • Acer P1206P | User Manual - Page 62
    Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod. Screw Type A 50 mm length 08
  • Acer P1206P | User Manual - Page 63
    is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models P1101/P1101C/P1201/P1201B/ P1203PB/P1203Pi/P1201n/ P1201i/P1203P/P1206P/P1303PW Screw Type B Diameter (mm) Length (mm) 3 25 Washer Type Large Small V V SCREW SPEC. M3 x 10 mm 60.0 mm 160.0 mm
  • Acer P1206P | User Manual - Page 64
    refresh scan rate Lamp type Keystone correction Audio Weight Dimensions (W x D x H) Remote control Digital Zoom Power supply DLP® P1101/P1101C: Native: SVGA (800 x 600) , Maximum: UXGA (1600 x 1200), 1080p(1920x1080) P1201/P1201B/P1203PB/P1203Pi/P1201n/P1201i/P1203P/ P1206P: Native: XGA (1024 x 768
  • Acer P1206P | User Manual - Page 65
    X X P1203P/ P1206P/ P1303PW V V x2 V V V V V V V V X X X X P1201i V V V V V V V P1201n V X x2 V V V V P1201B/ P1203PB/ P1203Pi V V V V V V V P1101C V X x2 V V V V V V V V V V V V V X X V X X X X x2 X x2 x2 V X V V V V V X V X X X * Design and specifications are
  • Acer P1206P | User Manual - Page 66
    56 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA Power Mac G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768
  • Acer P1206P | User Manual - Page 67
    English 57 2 VGA Analog - Extended Wide timing Modes WXGA Resolution 1280x768 1280x768 1280x768 1280x720 1280x800 1440x900 1680x1050 1366x768 1920x1080-RB 1920x1080-EIA 1024x600 V.Frequency [Hz] 60 75 85 60 60 60 60 60 60 60 60 H.Frequency [KHz] 47.78 60.29 68.63 44.80 49.60 55.90 65.30 47.71
  • Acer P1206P | User Manual - Page 68
    58 English XGA PowerBook G4 i Mac DV (G3) 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1280x1024 1280x960 640x480 640x480 800x600 1024x768 1152x870 1280x960
  • Acer P1206P | User Manual - Page 69
    59 English 3 HDMI - Video Signal Modes Resolution 480i 720x480(1440x480) 480p 720x480 576i 720x576(1440x576) 576p 720x576 720p 1280x720 720p 1280x720 1080i 1920x1080 1080i 1920x1080 1080p 1920x1080 1080p 1920x1080 1080p 1920x1080 1080p 1920x1080 Horizontal scan rate:
  • Acer P1206P | User Manual - Page 70
    60 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
  • Acer P1206P | User Manual - Page 71
    du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors
  • Acer P1206P | User Manual - Page 72
    that: Product: Trade Name: Model Number: Machine Type: Projector Acer DSV1025/DSV1026/DNX1021/DNX1022/DNX1023/ DNX1024/DNX1016/DNX1017/DNX1018/DNX1014/ DWX1015 P1101/P1101C/P1201/P1201B/P1201i/P1201n/ P1203P/P1203PB/P1203Pi/P1206P/P1303PW series Is compliant with the essential requirements and
  • Acer P1206P | User Manual - Page 73
    Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan The standards listed below are applied EN300 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2010. Easy Lai /Manager Regulation Center, Acer Inc. Jan. 18, 2011 Date
  • Acer P1206P | User Manual - Page 74
    declaration: Product: DLP Projector Model Number: DSV1025/DSV1026/DNX1021/DNX1022/ DNX1023/DNX1024/DNX1016/DNX1017/ DNX1018/DNX1014/DWX1015 Machine Type: P1101/P1101C/P1201/P1201B/P1201i/P1201n/ P1203P/P1203PB/P1203Pi/P1206P/P1303PW series Name of Responsible Party: Acer America Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

Acer Projector
P1101/P1101C/P1201/P1201B/
P1201i/P1201n/P1203P/P1203PB/
P1203Pi/P1206P/P1303PW Series
User's Guide