Home » Acer Manuals » Computer Monitors » Acer P166HQL » Manual Viewer

Acer P166HQL User Manual

Acer P166HQL Manual

View all Acer P166HQL manuals

Add to My Manuals
Save this manual to your list of manuals

Acer P166HQL manual content summary:

Acer P166HQL | User Manual - Page 1
AND COMFORT 2 UNPACKING 5 ATTACHING / REMOVING THE BASE 6 SCREEN POSITION ADJUSTMENT 6 CONNECTING THE POWER CORD 7 SAFETY PRECAUTION 7 CLEANING YOUR MONITOR 7 POWER SAVING 8 DDC...8 CONNECTOR PIN ASSIGNMENT 9 STANDARD TIMING TABLE 10 INSTALLATION 11 USER CONTROLS 12 TROUBLESHOOTING 18
Acer P166HQL | User Manual - Page 2
SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES  Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears. 
Acer P166HQL | User Manual - Page 3
all warnings and instructions marked on the product. CAUTION for accessibility Be sure that the power outlet you plug the power cord into is . • After setting the volume level, do not increase it after your ears adjust. • Limit the amount of time listening to music at high volume. • Avoid
Acer P166HQL | User Manual - Page 4
instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. LCD Pixel Statement The LCD your comfort zone by adjusting the viewing angle of the monitor, using a footrest,
Acer P166HQL | User Manual - Page 5
, poorly focused screens, very small breaks by looking away from the monitor and focusing on a distant point. adjusting your display to an awkward viewing angle. • Avoid looking at bright light sources, such as open windows acer-group.com/public/Sustainability/sustainability01.htm http://www.acer
Acer P166HQL | User Manual - Page 6
following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future.  LCD Monitor  AC Power Cord  D-Sub Cable (Optional)  DVI Cable (Optional)  Audio Cable (Optional)  User Manual  Quick Start Guide EN-5
Acer P166HQL | User Manual - Page 7
arrow direction to remove it. SCREEN POSITION ADJUSTMENT In order to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted to 15 degrees up or 5 degrees down
Acer P166HQL | User Manual - Page 8
cord you use is the correct type required for your area.  This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required.  Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet
Acer P166HQL | User Manual - Page 9
monitor will be driven into Power Saving" mode by the control signal from the display controller, as indicated by the amber-color power LED. State ON Power Saving Mode LED Light Blue Amber The power , the monitor is able to Plug and Play with your system if your system also supports DDC protocol
Acer P166HQL | User Manual - Page 10
CONNECTOR PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. 1. 2. 3. 4. 5. 6. 7. 8. DESCRIPTION Red Green Blue Monitor Ground DDC-return R-Ground G-Ground B-Ground PIN NO. 9. 10. 11. 12. 13. 14. 15. DESCRIPTION +5V Logic Ground Monitor Ground DDC-Serial Data H-Sync V-Sync DDC-Serial
Acer P166HQL | User Manual - Page 11
Hz 11 XGA 1024 x 768 60 Hz 12 XGA 1024 x 768 70 Hz 13 XGA 1024 x 768 75 Hz 14 VESA 1280 x 720 60 Hz 15 WXGA 1280 x 800 60 Hz 16 WXGA 1366 x 768 60 Hz EN-10
Acer P166HQL | User Manual - Page 12
to the monitor, then to a properly grounded AC outlet. 3. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 4. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. EN
Acer P166HQL | User Manual - Page 13
to adjust volume (Only Audio-Input Model)(Optional) INPUT Input Key Use Input key to select from different video sources that may be connected to your monitor. (a) VGA input (b) DVI input (c) HDMI input As you cycle through the sources you will see the following messages on right top side of screen
Acer P166HQL | User Manual - Page 14
instructions Step 1: Press " " key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press "" or "" to select the mode Step 3: Press " AUTO " key to confirm the mode and run Auto Adjust N/A ECO mode Adjusts the settings to reduce power consumption. N/A Standard
Acer P166HQL | User Manual - Page 15
: The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. For advanced
Acer P166HQL | User Manual - Page 16
Adjusting the OSD position 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. EN-15
Acer P166HQL | User Manual - Page 17
Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the /  keys, select Setting from the OSD. Then navigate to the feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings. EN-16
Acer P166HQL | User Manual - Page 18
Product information 1 Press the MENU key to bring up the OSD. 2 Using the /  keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-17
Acer P166HQL | User Manual - Page 19
sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems No Picture Abnormal Picture Abnormal Sound (Only AudioInput model) (Optional) Current Status Remedy LED ON  Using OSD, adjust brightness and
Acer P166HQL | User Manual - Page 20
, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913 www.acer.it Hereby declare that: Product: Trade Name: Model Number: SKU Number: LCD Monitor Acer P166HQL P166HQL 0~9, a ~ z, or A ~ Z) Is compliant with the essential requirements and other relevant provisions of the following
Acer P166HQL | User Manual - Page 21
: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. LCD Monitor Model Number: P166HQL SKU Number: ("*" = 0~9, a ~ z, or A ~ Z) P166HQL******** Name of Responsible Party: Address of Responsible Party: Acer