Acer P203 P203W LCD Service Guide - Page 14
Take a key function board to hook with front, bezel No.1~2 and connect to key function, cable. - p203w d
View all Acer P203 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
4. Assembly and Disassembly Procedures (continued) ACER P203W 13 Go to cover page S8 Connect FFC cable to LCD panel. There are two locks over here when plugging in should be noticed S10 Use a Phillips-head screwdriver screwed the No.1~4 screws on both side and assemble the LCD panel and bracket chassis module. (No1~4 screw size=M3x6; Torque=3~4KGFxCM). 1 2 3 4 S7 Plug in parallel direction S8 Angel < 5 degrees Plug 8 lamp cables to the connectors of power S9 board.(Both of right and left sides) Use a Phillips-head screwdriver screwed the S11 No.1~2 screws. (No1~2 screw size=M3x10; Torque=3~5KGFxCM). 1 2 S12 Use a Hex-head screwdriver screwed the DVI and D-SUB connectors (No.1~4Hex Nut screws Size=M3x8;Torque=3~5KGFxCM). 2 1 4 3 S13 Take a key function board to hook with front bezel (No.1~2) and connect to key function cable. 1 2