Home » Acer Manuals » Computer Monitors » Acer P237HL » Manual Viewer

Acer P237HL User Manual

Acer P237HL Manual

View all Acer P237HL manuals

Add to My Manuals
Save this manual to your list of manuals

Acer P237HL manual content summary:

Acer P237HL | User Manual - Page 1
and comfort 2 Unpacking 5 Attaching/Removing the base 6 Screen position adjustment 6 Connecting the power cord 7 Safety precaution 7 Cleaning your monitor 7 Power saving 8 DDC 8 Connector Pin Assignment 9 Standard Timing Table 11 Installation 12 User controls 13 Troubleshooting 19
Acer P237HL | User Manual - Page 2
The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it
Acer P237HL | User Manual - Page 3
exposure risk from lithium battery pack. Safe listening Follow these instructions, suggested by hearing experts,to protect your earing. • distortion. • After setting the volume level, do not increase it afteryour ears adjust. • Limit the amount of time listening to music at high volume.
Acer P237HL | User Manual - Page 4
service • the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment use Computer users may complain of eyestrain and headaches after prolonged use. Users are also
Acer P237HL | User Manual - Page 5
reach • if you view your monitor more than your documents, place the middle of the display. • Adjust the display brightness and/or contrast to following work habits to make your computer use more relaxing and productive: acer-group.com/public/Sustainability/sustainability01.htm http://www.acer
Acer P237HL | User Manual - Page 6
when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. • LCD Monitor • AC Power Cord • D-Sub Cable (Optional) • DVI Cable (Optional) • HDMI Cabel (Optional) • Audio Cable (Optional) • User Manual • Quick Start Guide EN-5
Acer P237HL | User Manual - Page 7
the arrow direction to remove it. SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted to 15 degrees up or 5 degrees
Acer P237HL | User Manual - Page 8
sure that the power cord you use is the correct type required for your area. • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. • Plug one end of the power cord to the AC Inlet, plug another
Acer P237HL | User Manual - Page 9
monitor will be driven into Power Saving" mode by the control signal from the display controller, as indicated by the amber-color power LED. State ON Power Saving Mode LED your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The
Acer P237HL | User Manual - Page 10
PIN ASSIGNMENT 15-Pin Color Display Signal Cable PIN NO. 1. 2. 3. 4. 5. 6. 7. 8. DESCRIPTION Red Green Blue Monitor Ground DDC-return R-Ground G-Ground B-Ground PIN NO. 9. 10. 11. 12. 13. 14. 15. DESCRIPTION +5V Logic Ground Monitor Ground DDC-Serial Data H-Sync V-Sync DDC-Serial Clock EN-9
Acer P237HL | User Manual - Page 11
TMDS Data1- 21. 10. TMDS Data1+ 22. 11. TMDS Data 1/3 Shield 23. 12. NC 24. Meaning NC +5V Power Logic Ground Hot Plug Detect TMDS Data0 Shield 17. 9. TMDS Data0- 18. 19. * only for certain models EN-10 Meaning TMDS Clock+ TMDS Clock Shield TMDS Clock- CEC Reserved (N.C.
Acer P237HL | User Manual - Page 12
Standard Timing Table Mode Resolution 1 2 MAC 3 VESA 4 SVGA 5 SVGA 6 XGA 7 XGA 8 VESA 9 SXGA 10 WXGA 11 WXGA+ 12 UXGA 640x480 640x480 720x400 800x600 800x600 1024x768 1024x768 1152x864 1280x1024 1280x800 1440x900 1920x1080 60 Hz 66.66 Hz 70
Acer P237HL | User Manual - Page 13
and connect the other end to the computer's port. 1-3 Connect HDMI Cable (Only HDMI-Input Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. 2. Connect the Audio Cable(Only Audio-Input Model)(Optional) 3. Connect power cord Connect the power
Acer P237HL | User Manual - Page 14
to activate the OSD menu. Volume Up / Down Press to adjust volume (Only Audio-Input Model)(Optional) INPUT Input Key Use Input key to select from different video sources that may be connected to your monitor. (a) VG A inp ut (b) DV I input (c) HDMI input A s you cycle thro ugh the sources you wi ll
Acer P237HL | User Manual - Page 15
eColor Management Operation instructions Step 1: Press " " Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press " " or " " to select the mode Step 3: Press " AUTO " Key to confirm the mode and run Auto Adjust. Features and Benefits Main Menu icon Sub Menu icon
Acer P237HL | User Manual - Page 16
content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Pressthe MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. For advanced settings, please
Acer P237HL | User Manual - Page 17
Adjusting the OSD position 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust. EN-16
Acer P237HL | User Manual - Page 18
Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the / keys, select Setting from the OSD. Then navigate to the feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings. EN-17
Acer P237HL | User Manual - Page 19
Product information 1 Press the MENU key to bring up the OSD. 2 Using the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input. EN-18
Acer P237HL | User Manual - Page 20
sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF · Check the
Acer P237HL | User Manual - Page 21
Check if AC power cord is properly connected to the monitor. LED displays amber color · Check if video signal cable is properly connected at the back of monitor. · Check if the power of computer system is ON. Abnormal Sound (Only AudioInput model) (Optional) No sound, or sound level is too low
Acer P237HL | User Manual - Page 22
Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Hereby declare that: Product: Trade Name: Model Number: SKU Number: LCD Monitor Acer P237HL P237HLxxxxxx ("x" = 0~9, a ~ z, A ~ Z, or blank) Is compliant with the essential requirements and other relevant provisions of
Acer P237HL | User Manual - Page 23
. The following local Manufacturer /Importer is responsible for this declaration: P roduct: Model Number: SKU Number: LCD Monitor P237HL P237HLxxxxxx ("x" = 0~9, a ~ z, A ~ Z, or blank) Na me of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. San