Acer PD100 PD100 and PD120 Service Guide - Page 23

No Step Procedure 3 Key in Serial 1. Key in the Serial Number 1 Number into the Barcode blank space. 2. In "White Source Select", make a check in "VGA" and "DVI". 3. Check the COM Port is "COM 1". 4. Click "Program". 2 3 4 Change Cable "Please change the Cable to Analog to Analog" message is shown on the screen, then click "OK". Note: "RUN" message will appear on the screen. 5 Change Cable "Please change the Cable to Digital to Digital" message is shown on the screen, then click "OK". Note: "RUN" message will appear on the screen. 6 Finished When the EDID program is completed, the message, "OK", will appear on the screen. 17 Photo 4 Chapter 2