Acer Power F1 Power F1/ Aspire T310 Service Guide - Page 46

The following table describes each parameter under the sub-menu. Settings in boldface are the default and suggested values. Parameter IRQ [3-7, 9-15], NMI IRQ 8 Break Suspend Power On by Ring Wake-Up by PCI Card USB Port Wakeup from S3 PS2KB Wakeup from S3 PS2MS Wakeup from S3 Resume by Alarm Description Options This option determines whether any activity for Enabled IRQ 3-7/9-15 will cause the system to wake from Disabled a power saving mode. Determines whether the system will monitor IRQ Enabled 8 activity and wake the system from a power saving mode when IRQ 8 is activated. Disabled An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft off state. Enabled Disabled This item specifies whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected. Enabled Disabled This option allows you to specify whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected. Enabled Disabled This option allows you to set hot key combination Hot Key to turn on the system by keyboard. This option allows you to set the mouse action to Enabled turn on the system. Disabled When set to Enabled, the following three fields become available: Month Alarm, Day of Month Alarm, and Time Alarm Upon arrival of the alarm time, it will instruct the system to wake up. Enabled Disabled Chapter 2 33