Acer Power F1 Power F1/ Aspire T310 Service Guide - Page 77

BIOS Messages Floppy Drive(s) Write Protected Hard Disk Drive(s) Write Protected IDE Drive 0 Error IDE Drive 1 Error IDE Drive 2 Error IDE Drive 3 Error IRQ Setting Error Expansion ROM Allocation Fail I/O Resource Conflict(s) Memory Resource Conflict(s) PCI Device Error PS/2 Pointing Device Interface Error PS/2 Pointing Device Error DMI Table Was Destroyed Press "DEL" key to enter Setup or F1 key to continue Press ESC to turn off NMI, or any key to reboot Insert system diskette and press ENTER key to reboot Action/FRU 1. Ensure that the diskette drive is not set to [Write Protected] in the Security Options in BIOS Setup. 2. Load default settings in Setup. 1. Enter BIOS Setup and load the default settings. 2. Check IDE drive jumper. 3. IDE hard disk drive power. 4. IDE hard disk drive cable/connection. 5. IDE hard disk drive. 1. Load default settings in Setup. 2. Enter BIOS Setup and set the Reset Resource Assignments of the PnP/PCI Options to Yes, then reboot the system. 3. Remove all adapter cards that are NOT factoryinstalled, then reboot the system 1. Load default settings in Setup. 2. Enter BIOS Setup and set the Reset Resource Assignments of the PnP/PCI Options to Yes, then reboot the system. 3. Remove all adapter cards that are NOT factoryinstalled, then reboot the system. 1. Re-connect PS/2 keyboard and mouse. 2. Enter BIOS Setup and load the default settings. 3. PS/2 mouse 4. PS/2 keyboard 5. System board 1. Flash BIOS 1. Press DEL to enter Setup and reconfigure the system. 1. Press ESC to reject NMI error or press any other key to reboot the system. 1. Insert a bootable disk into the floppy disk drive or remove this disk if a hard disk is installed. 64 Chapter 4