Acer Power SC Power SC Service Guide - Page 54

Parameter Plug and Play OS Reset Resource Assignments Description Set to Yes if the computer is running on Win95/ Win98 or Win2000. For any other OS, set to No. When enabled, avoids IRQ conflict when installing non-PnP and PnP PCI cards. This clears all resource assignments and allows BIOS to reassign resources to all installed PnP devices the next time the system boots. Options Yes or No Yes or No After clearing the resource data, it is recommended that you reset the parameter to its default, i.e., No. Chipset Settings The Chipset Settings will be shown only if you press Alt + F4 in main menu: Advanced Options ! Memory/Cache Options ! PnP/PCI Options ! *Chipset Settings Press Enter to view the Chipset settings information. The following screen displays the Chipset settings menu: Chipset Settings Spread Spectrum Enabled ] Memory Stable Register Enabled ] RIMM TRDLY value Auto ] ICH Audio Controller Enabled ] ICH Modem Controller Disabled ] Delay Transaction Enabled ] 46 Chapter 2