Acer Predator PO3-600 User Manual

Acer Predator PO3-600 Manual

Get Acer Predator PO3-600 PDF manuals and user guides View all Acer Predator PO3-600 manuals
Add to My Manuals
Save this manual to your list of manuals

Acer Predator PO3-600 manual content summary:

  • Acer Predator PO3-600 | User Manual - Page 1
    Table of Contents - 1 Predator PO3-600 User's Guide
  • Acer Predator PO3-600 | User Manual - Page 2
    is protected by copyright laws. The information contained in this manual is subject to change without notice. Images provided herein are for reference only and may contain information or features that do not apply to your computer. Acer Group shall not be liable for technical or editorial errors or
  • Acer Predator PO3-600 | User Manual - Page 3
    Table of Contents - 3 Table of Contents 1. UPGRADING YOUR COMPUTER 5 Installation precautions 5 ESD precautions 5 Required tools 5 Pre-installation instructions 6 Post-installation instructions 6 System Upgrade 7 Removing the left side system cover....7 Installing the left side system cover
  • Acer Predator PO3-600 | User Manual - Page 4
    4 - Upgrading your Computer Upgrading your Computer In this section, you will find: • Instructions on how to replace a hardware component
  • Acer Predator PO3-600 | User Manual - Page 5
    with pre-installation and post-installation instructions. ESD precautions Electrostatic discharge (ESD) can damage your processor, disk drives, expansion boards, and other components. Always observe the following precautions before you install a computer component: 1. Do not remove a component from
  • Acer Predator PO3-600 | User Manual - Page 6
    serious damage. Do not attempt the procedures described in the following sections unless you are a qualified service technician. Post-installation instructions Observe the following after installing a computer component: 1. See to it that the components are installed according to the step-by- step
  • Acer Predator PO3-600 | User Manual - Page 7
    all peripherals connected to it. Read the Pre- installation instructions on page 6. 2. Remove the two screws that secure the system cover to the computer. 3. Slide the cover toward the back of the computer and pull away from the side of the computer. 4. Set the cover aside for re-installation later
  • Acer Predator PO3-600 | User Manual - Page 8
    8 - Upgrading your Computer Installing the left side system cover 1. Align the cover to the sides of the computer and slide the cover toward the front of the computer. 2. Secure the cover with two screws. 3. Observe the Post-installation instructions on page 6.
  • Acer Predator PO3-600 | User Manual - Page 9
    Upgrading your Computer - 9 Hard drives The computer supports installation of one 3.5-inch SATA hard drives in the internal HDD cage. Removing the 3.5-inch hard drives 1. Perform Pre-installation instructions on page 6. 2. Remove the four screws that secure the HDD bracket to the computer.
  • Acer Predator PO3-600 | User Manual - Page 10
    10 - Upgrading your Computer 3. Rotating the HDD bracket and pull away from the side of computer (1) (2). 2 1 2 4. Disconnect the power and data cables from the hard drives.
  • Acer Predator PO3-600 | User Manual - Page 11
    Upgrading your Computer - 11 5. Remove the four screws that secure the hard drives to the bracket.
  • Acer Predator PO3-600 | User Manual - Page 12
    12 - Upgrading your Computer Installing the 3.5-inch hard drives 1. Remove the new hard drive from their packaging. 2. Insert the new hard drive into the bracket and secure the new hard drive with four screws. 3. Connect the power and data cables to the hard drive.
  • Acer Predator PO3-600 | User Manual - Page 13
    Upgrading your Computer - 13 4. Insert the HDD bracket into the side of computer (1) (2) and rotating the bracket to fix. 1 2 1 5. Secure the HDD bracket with four screws. 6. Observe the Post-installation instructions on page 6.
  • Acer Predator PO3-600 | User Manual - Page 14
    14 - Upgrading your Computer Memory The computer has four DDR4 U-DIMM slots that support up to 64 GB maximum system memory. Memory configuration guidelines DIMM4 DIMM2 DIMM3 DIMM1  To ensure data integrity, use only Acer-approved DDR4 2400 MHz or DDR4 2666 MHZ type memory modules.  Memory
  • Acer Predator PO3-600 | User Manual - Page 15
    Upgrading your Computer - 15 Removing a memory module 1. Perform Pre-installation instructions on page 6. 2. Press outward the holding clips on both sides of the DIMM slot outward to release the memory module (1). 3. Gently pull the memory module
  • Acer Predator PO3-600 | User Manual - Page 16
    16 - Upgrading your Computer Installing a memory module Note DIMM slots on the mainboard must be installed only in certain configurations. Numbers next to the tab in the memory slot. 1 2 5. Repeat steps 1~4 to install the other memory modules. 6. Observe the Post-installation instructions on page 6.
  • Acer Predator PO3-600 | User Manual - Page 17
    - 17 Graphic board The computer contains one or two Graphic boards installed in the PCIe x16 slots. The detail configuration will be differed by different models. Removing the Graphic board 1. Perform Pre-installation instructions on page 6. 2. Remove the 3.5-inch hard drives. See removing the
  • Acer Predator PO3-600 | User Manual - Page 18
    18 - Upgrading your Computer 5. Rotating the latch bracket and graphic board hold module to release. 6. Release the latch that secures the graphic board to the mainboard.
  • Acer Predator PO3-600 | User Manual - Page 19
    Upgrading your Computer - 19 7. Detach the Graphic board from the PCIe x16 slot.
  • Acer Predator PO3-600 | User Manual - Page 20
    20 - Upgrading your Computer Installing the Graphic board 1. Remove the new graphic board from its packaging. 2. Insert the Graphic boards into the PCIe x16 slot and push it until
  • Acer Predator PO3-600 | User Manual - Page 21
    Upgrading your Computer - 21 4. Secure the Graphic board with screws. 5. Connect the power cables to the Graphic boards. 6. Replace the 3.5-inch hard drives. See installing the 3.5-inch hard drives. 7. Observe the Post-installation instructions on page 6.
  • Acer Predator PO3-600 | User Manual - Page 22
    22 - Upgrading your Computer M.2 SSD module The computer contains one M.2 SSD module installed in the M.2 PCIe slot. Removing the M.2 SSD module 1. Perform Pre-installation instructions on page 6. 2. Remove the 3.5-inch hard drives. See removing the 3.5-inch hard drives. 3. Disconnect the power and
  • Acer Predator PO3-600 | User Manual - Page 23
    Upgrading your Computer - 23 5. Release front bezel hook and rotating it out from the computer. 6. Remove the screws and release ODD support out from computer.
  • Acer Predator PO3-600 | User Manual - Page 24
    24 - Upgrading your Computer 7. Remove the screws that secures the M.2 SSD module from the mainboard. 8. Detach the M.2 SSD module from the mainboard.
  • Acer Predator PO3-600 | User Manual - Page 25
    Upgrading your Computer - 25 Installing the M.2 SSD module 1. Remove the new M.2 SSD module from its packaging. 2. Insert the M.2 SSD module into its slot in the mainboard. 3. Secure the M.2 SSD module and mainboard with screws.
  • Acer Predator PO3-600 | User Manual - Page 26
    26 - Upgrading your Computer 4. Insert the ODD support to the computer and secure the screws. 5. Align the front bezel hook to the sides of the computer and rotating it until it into place on the computer.
  • Acer Predator PO3-600 | User Manual - Page 27
    Upgrading your Computer - 27 6. Insert the ODD module to the computer and push it until it latches into place 7. Connect the power and data cables from the ODD drives. 8. Replace the 3.5-inch hard drives. See installing the 3.5-inch hard drives. 9. Observe the Post-installation instructions on page
  • Acer Predator PO3-600 | User Manual - Page 28
    28 - PredatorSense PredatorSense In this section, you will find: • Introduction to the PredatorSense utility • How to use PredatorSense
  • Acer Predator PO3-600 | User Manual - Page 29
    settings • Live update To set up the PredatorSense application (Windows 10): 1. From the Start menu, select All apps. 2. Select Acer. 3. Select PredatorSense. [Note] PredatorSense function is keeping increased to enlarge user experience, Any new features update excluded from user guide should be
  • Acer Predator PO3-600 | User Manual - Page 30
    Auto, Gaming and Silence) Provide Fan speed control in Auto, Gaming and RAM Advanced settings Provide control for Units of temperature Live update While user launches UI first time after a restart/boot while network is available, UI will start to check Acer web service. If there is any new update
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
Table of Contents
-
1
Predator
PO3-600
User’s Guide