Acer S500 Service Guide - Page 17

Machine Disassembly and Replacement Chapter 3 This chapter contains step-by-step procedures on how to disassemble and reassemble the smartphone for maintenance and troubleshooting. IMPORTANT: The use of metal tools during disassembly may damage the casing. Use plastic tools where possible. IMPORTANT: Cover the work area with a clean, dry, lint-free cloth before placing the smartphone face down. Disassembly Requirements To disassemble the smartphone, you need the following tools; Wrist grounding strap and conductive mat to prevent electrostatic discharge. A clean, dry, lint-free cloth to prevent damage to the LCD during disassembly Plastic pry less than or equal to 0.96 mm thickness Tweezers (plastic and metal) NOTE: 1. The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components. 2. The screws are SUGGESTED not to be re-used 3. The adhesives, Gaskets and foil conductors cannot be re-used. (Except this one, Gasket_Middle_Unibody_A5Q.) Related Information The product previews seen in the disassembly procedures may not represent the final product color or configuration. Chapter 3 11