Acer SL1320Wn ErP Energy-related Product directive technical document
Acer SL1320Wn Manual
 |
View all Acer SL1320Wn manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer SL1320Wn manual content summary:
- Acer SL1320Wn | ErP Energy-related Product directive technical document - Page 1
Technical Documentation of (EC) No 1275/2008 Entry Product type No. 1 Networked equipment type Projector Equipment with HiNA functionality 2 Manufacturer name, address 3 Product model number 4 Year of manufacture For products with a display unit or light 5 source, the total content of mercury is - Acer SL1320Wn | ErP Energy-related Product directive technical document - Page 2
For each type of network port, the (maximum) power consumption of the 14 NA condition providing networked standby, if only this port is used for remote activation The default time after which the power management function, or similar function, 15 NA has switched the equipment into standby - Acer SL1320Wn | ErP Energy-related Product directive technical document - Page 3
is on and with no singal after 20min, will automatically switch to standby mode Notes regarding the operation of the 35 equipment OSD user guide 36 Test parameter for ambient temperature 23.2 ℃ 37 Test parameter for test voltage 230 V 38 Test parameter for frequency 50 Hz Test parameter for - Acer SL1320Wn | ErP Energy-related Product directive technical document - Page 4
Test parameter for information and documentation on the instrumentation, 40 set-up and circuits used for electrical testing 1. Equipment setup: 1.1 AC Power Source: EXTECH/6210 1.2 Pattern Generator: QuantumData 802B 1.3 Power-Meter: Zentech / WT210 1.4 Test unit: 2. Test Condition: 2.1 AC Power
-
1 -
2 -
3 -
4
 |
 |
Entry
No.
Product type
Projector
1
Networked equipment type
Equipment with HiNA functionality
2
Manufacturer name,
address
Acer Italy srl
Viale De Gasperi 88/A
20017 Mazzo di Rho ( MI) Italy
3
Product
model
number
SL1220n/SL1320Wn
4
Year of manufacture
2020
5
For products with a display unit or light
source, the total content of mercury is
0 mg
6
The number and type of network ports
with the exception of wireless network
ports; in particular it shall be declared if
the same physical network port
accommodates two or more types of
network ports
1 LAN
7
Where these ports are located on the
equipment
8
The number and type of wireless network
ports; in particular it shall be declared if
the same physical network port
accommodates two or more types of
network ports
0
9
Whether all network ports are deactivated
before delivery
Yes
10
Power consumption of standby mode
1.51W
11
Power consumption of off mode
NA
12
Power consumption in networked standby
if all wired network ports are connected
and all wireless network ports are
activated
NA
13
Power consumption of configuration with
highest networked standby power
consumption. Only required if it is not
possible to test the configuration with all
wired network ports connected and all
wireless network ports activated
NA
Technical Documentation of (EC) No 1275/2008