Acer TravelMate 2310 TravelMate 2310 Service Guide - Page 25

LCD Item Surface Treatment Typical White Luminance (cd/m2) also called Brightness Luminance Uniformity Contrast Ratio Response Time (Optical Rise Time/Fall Time)msec Nominal Input Voltage VDD Typical Power Consumption (watt) Weight Physical Size(mm) Support Color Viewing Angle (degree) Horizontal: Right/Left Vertial: Upper/Lower Temperature Range( ° C) Operating Storage (shipping) Specification Haze 0 (Glare), Hardness 3H Hard coating (2H) glare+ Anti reflective treatment of the front polarizer 200 185 not show 300 25(rise+falling) not show 3.7 (for backlight unit) not show 344(W)x222(H)x6.5(D) Native 262K colours 45/45 15/35 not show 300 30(rise+falling) not show Total 5.26 @LCM circuit 1.12, backlight input 4.14 590 344(W)x222(H)x6.5(D) 262K colours 60/60 40/50 0 to 50 -20 to -60 0 to 50 -20 to -60 AC Adapter Item Vendor & model name Input Requirements Maximum input current (A, @90Vac, full load) Nominal frequency (Hz) Frequency variation range (Hz) Input voltage range (Vrms) Inrush current Efficiency Output Ratings (CV mode) DC output voltage Noise + Ripple Load Output Ratings (CC mode) DC output voltage Constant current mode Dynamic Output Characteristics Turn-on delay time Hold up time Specification DELTA SADP-65KB BFD LITE-ON PA-1650-02 Q2 19V HIPRO HP-OK066B13QT 1.5 A @ 110Vac 1.0 A @ 240Vac 50-60 47-63 90-270 The maximum inrush current will be less than 50A and 100A when the adapter is connected to 115Vac and 230Vac respectively. It should provide an efficiency of 80% minimum, when measured at maximum load under 115Vac. 19V 300mVp-pmax (20 MHz bandwidth) 0(min) 3.16A(max) 19V +/-1.0V for CV mode 3.6 +/- 0.3A 3 sec (@ 115Vac) 5ms (@115Vac, Full load) Chapter 1 25