Acer TravelMate 270 TravelMate 270 Service Guide - Page 45

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.. Parameter System Time System Date Floppy Disk Drive Internal Hard Disk ATAPI Device Boot Display Device Screen Expansion Television Type VGA Memory Description Format/Option Sets the system time. Format: HH:MM:SS (hour:minute:second)System Time Sets the system date. Format MM/DD/YYYY (month/day/ year) System Date Shows floppy drive type information. Shows the hard disk types and capacity. If there is no hard disk present or unknown type, "None" should be shown on this field, otherwise the capacity must be shown. Auto detects and shows the CD-ROM, DVDROM or CD-RW types. If there is no ATAPI Device present or unknown type, "None" should be shown on this field, otherwise the model name must be shown. Both: Simultaneously enable both the integrated LCD screen and the system's external video port (for an external CRT or projector). Auto-Selected: During power on process, the system will detect if any display device is connected on external video port. If any external display device is connected, the power on display will be in CRT (or projector) only mode. Otherwise it will be in LCD only mode. Option: Both or Auto-Selected Option: Enabled or Disabled Selects NTSC or PAL standard. Option: NTSC or PAL Specifies the amount of main memory to allocate Option: 32MB/16MB/64MB for VGA. NOTE: The sub-items under each device will not be shown if the device control is set to disable or auto. This is because the user is not allowed to control the settings in these cases. 40 Chapter 2