Acer TravelMate 270 TravelMate 270 Service Guide - Page 49

e 2. Type the current password in the Enter Current Password field and press . e 3. Press twice without typing anything in the Enter New Password and Confirm New Password fields. The computer then sets the Administrator Password parameter to "Clear". u 4. When you have changed the settings, press to save the changes and exit the BIOS Setup Utility. Changing a Password 1. Use the w and y keys to highlight the Set User Password parameter and press the e key. The Set Password box appears: e 2. Type the current password in the Enter Current Password field and press . 3. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field. e 4. Press . After setting the password, the computer sets the User Password parameter to "Set". 5. If desired, you can enable the Password on boot parameter. u 6. When you are done, press to save the changes and exit the BIOS Setup Utility. If the verification is OK, the screen will display as following. The password setting is complete after the user presses u. If the current password entered does not match the actual current password, the screen will show you the Setup Warning. 44 Chapter 2