Acer TravelMate 7530G Pre-Install AMD® AHCI Driver for Windows XP&
Acer TravelMate 7530G Manual
View all Acer TravelMate 7530G manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer TravelMate 7530G manual content summary:
- Acer TravelMate 7530G | Pre-Install AMD® AHCI Driver for Windows XP& - Page 1
-Install AMD® AHCI Driver for Windows XP® Operating System Pre-Installation Using the F6 Method Notes: Before you start to install Microsoft® Windows XP® operating system, you will need an optical drive, a USB floppy disk drive, a blank 1.44MB floppy diskette, and Microsoft® Windows XP® Professional - Acer TravelMate 7530G | Pre-Install AMD® AHCI Driver for Windows XP& - Page 2
3. At the beginning of the operating system installation, press [F6] to install a third party SCSI or RAID driver. 4. When prompted, select 'S' to Specify Additional Device. Page 2 of 4 - Acer TravelMate 7530G | Pre-Install AMD® AHCI Driver for Windows XP& - Page 3
the following controllers listed depending on your hardware version and configuration for AHCI Controllers: - Select [AMD AHCI Compatible RAID Controller-x86 platform] for Windows XP 32-bit Edition - Select [AMD AHCI Compatible RAID Controller-x64 platform] for Windows XP 64-bit Edition Page 3 of 4 - Acer TravelMate 7530G | Pre-Install AMD® AHCI Driver for Windows XP& - Page 4
for the hardware in your system and press Enter. 8. Press Enter again to continue. - Load [AMD AHCI Compatible RAID Controller-x86 platform] driver - Load [AMD AHCI Compatible RAID Controller-x64 platform] driver Leave the floppy diskette in the system until the next reboot as the software will need
Page 1 of 4
Pre-Install AMD® AHCI Driver for
Windows XP® Operating System
Pre-Installation Using the F6 Method
Notes:
Before you start to install Microsoft® Windows XP® operating system, you will need an
optical drive, a USB floppy disk drive, a blank 1.44MB floppy diskette, and Microsoft®
Windows XP® Professional/Home Edition Setup Disc (bootable).
1.
Extract AHCI F6 driver files to a blank 1.44MB floppy diskette. Make sure the following files are
contained in the root directory:
2.
Connect the USB floppy drive and then boot up from the Microsoft®
Windows XP®
Professional/Home Edition Setup Disc to install operating system.