Acer TravelMate P414-52 Lifecycle Extension Guide

Acer TravelMate P414-52 Manual

Get Acer TravelMate P414-52 PDF manuals and user guides View all Acer TravelMate P414-52 manuals
Add to My Manuals
Save this manual to your list of manuals

Acer TravelMate P414-52 manual content summary:

  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 1
    TravelMate P414-52 TravelMate Spin P414RN-52 LIFECYCLE EXTENSION GUIDE
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 2
    Self-Repair 1-1 Disassembly Procedures 1-3 Electronic Boards Diagrams 1-45 Troubleshooting 1-46 FRU (Field Replaceable Unit) List 1-47 Exploded Diagrams 1-48 Software Update 1-52 Personal Data Removal 1-53 i
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 3
    self-repair. NOTE: NOTE: Do not attempt to replace other components than those listed above. NOTE: NOTE: For replacement parts, always use only Acer certified components in order to safeguard quality, optimum system performance, stability and reliability of the product. NOTE: NOTE: Any damage to the
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 4
    process could harm the product. NOTE: NOTE: System BIOS upgrades or downgrades, if not performed by an Acer Service Center or authorized Service Partner, are at own risk. To update Drivers: Run Windows Update in order to get the latest drivers from Acer: Select the Start button Go to Settings
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 5
    will be voided. Before you start any of the procedures in this chapter, make sure to read the following safety guidelines and the respective instructions within the chapter. CAUTION! Turn off your computer and disconnect all power sources before opening the computer cover or panels. To avoid
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 6
    WEEE Annex VII Component 0 These components are classified as requiring selective treatment: Battery pack DIMM modules RTC battery WLAN module LTE module SSD module LTE board Card reader board Touchpad module Mainboard LCD panel 1-4 Disassembly Procedures
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 7
    Pre-disassembly Instructions 0 Do the following prior to starting any maintenance procedures: 1. Place the system on a stable work surface. 2. Remove the AC adapter from any of the ports (A)
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 8
    5. Remove the stylus pen from the stylus pen slot (E) (Figure 1-3). 6. Insert the eject tool into the hole on the SIM card tray (F). Then push to eject the card tray and remove the SIM card (Figure 1-3). E F Figure 1-3. Stylus Pen and SIM Card Removal NOTE: NOTE: Make sure the system is
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 9
    Base Cover Removal 0 1. Remove twelve (12) screws from the base cover (Figure 1-4). Figure 1-4. Base Cover Removal 2. Carefully pry up the base cover starting from the upper left side edge to release the latches (Figure 1-5). Figure 1-5. Base Cover Removal Disassembly Procedures 1-7
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 10
    3. Continue releasing the remaining latches. Then remove the base cover from the system (Figure 1-6). Figure 1-6. Base Cover Removal 1-8 Disassembly Procedures
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 11
    Battery Pack Removal 0 Prerequisite: Base Cover Removal 1. Find the battery pack (A) in the system (Figure 1-7). 2. Detach the tape (B) securing the battery cable connection (Figure 1-7). 3. Detach the transparent mylar (C) securing the cables (Figure 1-7). CB A Figure 1-7. Battery Pack Removal 4.
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 12
    5. Slightly lift the upper side of the battery pack to release it from the guide pins (E). Then remove the battery pack from the system (Figure 1-9). E E WEEE Annex VII Component: Battery Pack Figure 1-9. Battery Pack Removal + IMPORTANT: Follow local regulations for
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 13
    DIMM Modules Removal 0 Prerequisite: Battery Pack Removal 1. Push the DIMM module clips (A) outwards (Figure 1-10). A A Figure 1-10. DIMM Modules Removal 2. Disconnect the DIMM module (B) from the mainboard connector (C) (Figure 1-11). Then remove the DIMM module. WEEE Annex VII Component: DIMM
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 14
    3. Repeat steps 1~3 to remove another DIMM module. 1-12 Disassembly Procedures
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 15
    RTC Battery Removal 0 Prerequisite: Battery Pack Removal 1. Disconnect the RTC battery cable from the mainboard connector (A) (Figure 1-12). 2. Using plastic tweezers, carefully pry to detach the adhesive tape underneath the RTC battery (B). Then remove the RTC battery (Figure 1-12). A WEEE Annex
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 16
    WLAN Module Removal 0 Prerequisite: Battery Pack Removal 1. Find the WLAN module (A) on the top assembly (Figure 1-13). A Figure 1-13. WLAN Module Location 2. Disconnect the WLAN antennas cables from the WLAN module connectors (B) (Figure 1-14). 3. Remove one (1) screw securing the WLAN module (
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 17
    4. Disconnect the WLAN module from the mainboard connector (C) (Figure 1-15). Then remove the WLAN module. WEEE Annex VII Component: WLAN Module C Figure 1-15. WLAN Module Removal Disassembly Procedures 1-15
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 18
    LTE Module Removal 0 Prerequisite: Battery Pack Removal 1. Disconnect the LTE antennas cables from the LTE module connectors (A) (Figure 1-16). 2. Remove one (1) screw securing the LTE module (Figure 1-16). A Figure 1-16. LTE Module Removal 3. Disconnect the LTE module (B) from the mainboard
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 19
    LCD Module Removal 0 Prerequisite: Battery Pack Removal NOTE: NOTE: The LCD cable includes the G-sensor cable, light sensor cable, and TOF sensor cable. For Convertible model, the eDP cable includes the LCD panel cable, touch control board cable, and camera cable. For Clamshell model, the eDP cable
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 20
    connector (D). Then detach the cable and unroute it from the cable guides as shown in Figure 1-19. D Figure 1-19. LCD Module Removal 4. Disconnect the eDP cable from the mainboard connector (E). Then unroute the cable from the cable guides as shown in Figure 1-20. E Figure 1-20. LCD Module Removal
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 21
    5. Remove four (4) screws securing the LCD hinges (Figure 1-21). Figure 1-21. LCD Module Removal 6. Lift the top assembly until it is fully open (Figure 1-22). Figure 1-22. LCD Module Removal Disassembly Procedures 1-19
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 22
    7. Close the top assembly and lift both LCD hinges until they are fully extended (Figure 1-23). Figure 1-23. LCD Module Removal 8. Open the top assembly again and lift to remove the top assembly (Figure 1-24). Figure 1-24. LCD Module Removal ! CAUTION: Make sure all cables and antennas are moved
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 23
    SSD Module Removal 0 Prerequisite: Battery Pack Removal 1. Remove one (1) screw securing the SSD module (Figure 1-25). Figure 1-25. SSD Module Removal 2. Disconnect the SSD module (A) from the mainboard connector (B) (Figure 1-26). Then remove the SSD module. WEEE Annex VII Component: SSD Module
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 24
    LCD Module Removal 1. Remove one (1) screw (A) securing the I/O bracket (Figure 1-27). A Figure 1-27. LTE Board Removal 2. Release the I/O bracket (B) from the guide pin (C) and guide tab (D) (Figure 1-28). Then remove the bracket. B C Figure 1-28. LTE Board Removal 1-22 D Disassembly Procedures
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 25
    ) and DB FFC can be damaged if removed while the LTE board connectors are locked. 8. Release the LTE board (J) from the I/O connectors slots and guide pins (K) on the top assembly (Figure 1-30). Then remove the LTE board. WEEE Annex VII Component: LTE Board K K J Figure 1-30. LTE Board Removal
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 26
    Card Reader Board Removal 0 Prerequisite: SSD Module Removal 1. Detach the sponge (A) from the card reader board (Figure 1-31). A Figure 1-31. Card Reader Board Removal 1-24 Disassembly Procedures
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 27
    2. Disconnect the smart card reader FFC from the card reader board connector (B) (Figure 1-32). 3. Disconnect one end of the card reader board FFC from the card reader board connector (C). Then disconnect the other end of the FFC from the mainboard connector (D) (Figure 1-32). 4. Remove two (2)
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 28
    5. Release the card reader board (E) from the card reader slot and guide pins (F) (Figure 1-33). Then remove the card reader board. F E WEEE Annex VII Component: Card Reader Board F Figure 1-33. Card Reader Board Removal 1-26 Disassembly Procedures
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 29
    Touchpad Module Removal 0 Prerequisite: SSD Module Removal 1. Disconnect the smart card reader FFC from the card reader board connector (A) (Figure 1-34). 2. Detach the adhesive tape (B) securing the touchpad FFC connection (Figure 1-34). B A Figure 1-34. Touchpad Module Removal ! CAUTION: Smart
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 30
    3. Disconnect the touchpad FFC (C) from the touchpad module and mainboard connectors. Then carefully lift the portion of FFC (highlighted by the yellow lines) to detach it from the adhesive tape underneath as shown in Figure 1-35. Remove the touchpad FFC. 4. Disconnect the NFC FFC (D) from the NFC
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 31
    6. Lift slightly the mylar. Then detach the conductive tape (F) from the touchpad module and top assembly (Figure 1-36). 7. Detach the middle portion (G) of the NFC antenna cable from the top assembly. Then carefully remove the NFC antenna (H) from the touchpad module (Figure 1-36). F H G Figure 1-
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 32
    9. Remove the arm brackets (I) from the top assembly (Figure 1-38). I I Figure 1-38. Touchpad Module Removal 10. With one hand is placed underneath the touchpad module (J), release the touchpad module from the top assembly and then remove (Figure 1-39). WEEE Annex VII Component: Touchpad Module J
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 33
    Mainboard Removal 0 Prerequisite: Ensure that the DIMM Modules, Fan, Heatsink, Stylus Holder, LCD Module, and SSD Module have been disassembled prior removing the mainboard. 1. Detach the tape (A) securing the keyboard backlight FPC connection (Figure 1-40). 2. Remove one (1) screw (B) from the I/O
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 34
    3. Release the I/O bracket (C) from the guide pin (D) and guide tab (E) (Figure 1-41). Then remove the bracket. D C E Figure 1-41. Mainboard Removal 4. Disconnect the DB FFC from the LTE board connector (F) (Figure 1-42). 5. Disconnect the touchpad
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 35
    12. Disconnect the rear speaker cable from the mainboard connector (N) (Figure 1-42). N F GH IJ LM K Figure 1-42. Mainboard Removal ! CAUTION: DB FFC (Flexible Flat Circuit), touchpad FFC, NFC FFC, card reader board FFC, keyboard FPC (Flexible Printed Circuit), and keyboard backlight FPC, can
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 36
    14. Release the mainboard (P) from the I/O connectors slots and guide pins (Q) on the top assembly (Figure 1-44). Then remove the mainboard. WEEE Annex VII Component: Q Mainboard P Q Figure 1-44. Mainboard Removal 15. Flip the mainboard and
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 37
    16. Disconnect the DB FFC from the mainboard connector (S) (Figure 1-46). Then remove the FFC. S Figure 1-46. Mainboard Removal ! CAUTION: DB FFC (Flexible Flat Circuit) can be damaged if removed while the mainboard connector is locked. Figure 1-47. Mainboard + IMPORTANT: Circuit board >10 cm² has
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 38
    LCD Panel Removal (Convertible Model) 0 Prerequisite: LCD Module Removal NOTE: NOTE: The eDP cable includes the LCD panel cable, touch control board cable, and camera cable. 1. Starting near the camera module, pry the upper side of the LCD panel to release the latches (Figure 1-48). Figure 1-48. LCD
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 39
    2. Continue prying along the left and right sides of the LCD panel (Figure 1-49). Figure 1-49. LCD Panel Removal 3. Continue prying the remaining latches on the bottom side of the LCD panel (Figure 1-50). 4. Release the eDP cable (A) from the LCD hinge cap. Then remove the LCD panel (B) from the
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 40
    LCD Bezel Removal (Clamshell Model) 0 Prerequisite: LCD Module Removal 1. Push down both hinges (Figure 1-51). Figure 1-51. LCD Bezel Removal 2. Pry the LCD bezel from the bottom side to release the latches (Figure 1-52). Figure 1-52. LCD Bezel Removal 1-38 Disassembly Procedures
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 41
    3. Pry the LCD bezel from the right side to release the latches (Figure 1-53). Figure 1-53. LCD Bezel Removal 4. Pry the LCD bezel from the left side to release the latches (Figure 1-54). Figure 1-54. LCD Bezel Removal Disassembly Procedures 1-39
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 42
    5. Continue along the upper side of the bezel until all the latches have been released (Figure 1-55). Then remove the bezel from LCD module. Figure 1-55. LCD Bezel Removal 1-40 Disassembly Procedures
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 43
    Model) NOTE: NOTE: The eDP cable includes the LCD panel cable and camera cable. 1. Unroute the eDP cable (A) from the bottom side of the cable guides on the LCD cover as shown in Figure 1-56. Carefully detach the cable from its underneath adhesive if necessary. A Figure 1-56. LCD Panel Removal
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 44
    2. Pry slightly to access the double-sided mounting tape (B) underneath the LCD panel (C). Then pull to detach the double-sided mounting tape from the LCD cover. Repeat the same procedure to remove the double-sided mounting tape on another side of the LCD panel (Figure 1-57). WEEE Annex VII
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 45
    4. Lift the latch (E) securing the eDP cable (Figure 1-59). E Figure 1-59. LCD Panel Removal 5. Disconnect the eDP cable from the LCD panel connector (F) (Figure 1-60). F Figure 1-60. LCD Panel Removal 6. Remove the LCD panel from the LCD cover. ! CAUTION: Make sure the eDP cable is moved away from
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 46
    Top Assembly Removal (Keyboard Removal) 0 Prerequisite: Ensure that the Smart Card Reader, Card Reader Board, NFC Module, Touchpad Module, Right Speaker, Fingerprint Module, Left Speaker, and Rear Speakers have been disassembled prior removing the top assembly. NOTE: NOTE: The keyboard is included
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 47
    Electronic Boards Diagrams Figure 1-62. System Block Diagram Electronic Boards Diagrams 1-45
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 48
    center. Memory size mismatch Press F2 (during POST) to enter BIOS utility, then press Exit in the BIOS utility to reboot. If you still encounter problems after going through the corrective measures, please contact your dealer or an authorized service center for assistance. 1-46 Troubleshooting
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 49
    FRU (Field Replaceable Unit) List Please contact your local service center to find out how to obtain the part or replace your device. FRU (Field Replaceable Unit) List 1-47
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 50
    Exploded Diagrams 1 2 3 4 5 6 9 7 10 8 12 11 13 14 15 16 17 18 19 21 20 23 22 24 25 26 27 Figure 1-63. System Exploded Diagram Table 1-2. System Exploded Diagram No. Description 1 Top Assembly 2 Fingerprint FFC 3 Fingerprint Module 4 Fingerprint Bracket 5 Touchpad
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 51
    Table 1-2. System Exploded Diagram (Continued) No. Description 11 Left Speaker 12 LTE Board 13 DB FFC 14 Right I/O Bracket 15 Stylus Pen 16 Stylus Holder 17 Stylus Charger Cable 18 Mainboard 19 Card Reader Board 20 Left I/O Bracket 21 Fan 22 Heatsink 23 WLAN Module 24 DIMM Module 25
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 52
    1 2 3 6 4 5 7 8 Figure 1-64. LCD Assembly Exploded Diagram (Convertible Model) Table 1-3. LCD Assembly Exploded Diagram (Convertible Model) No. Description 1 LCD Cover 2 Camera Module 3 Microphone Rubbers 4 LCD cable (includes G-sensor cable, light sensor cable, and TOF sensor cable) 5 G-
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 53
    1 LCD Bezel 2 LCD Panel 3 eDP Cable (includes LCD panel cable and camera cable) 4 Microphone Rubbers 5 Camera Module 6 LCD Hinge L LCD Hinge R 7 LCD Cover Exploded Diagrams 1-51
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 54
    Software Update Updating your software 0 Please visit http://go.acer.com/?id=17883 1-52 Software Update
  • Acer TravelMate P414-52 | Lifecycle Extension Guide - Page 55
    hold down the Shift key while you select the Power icon > Restart in the lower-right corner of the screen. After your computer restarts, select Troubleshoot > Reset this PC. Option 3: Select Start , then press and hold down the Shift key while you select the Power icon > Restart to restart your
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
LIFECYCLE EXTENSION
GUIDE
TravelMate P414-52
TravelMate Spin P414RN-52