Acer V183HL User Manual

Acer V183HL Manual

Acer V183HL manual content summary:

  • Acer V183HL | User Manual - Page 1
    Acer LCD Monitor User's Guide
  • Acer V183HL | User Manual - Page 2
    Acer Incorporated. All Rights Reserved. Acer LCD Monitor User's Guide Original Issue: 8/2009 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual
  • Acer V183HL | User Manual - Page 3
    iii Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. • Due to the nature and instructions marked on the product. Cleaning your monitor Please carefully follow these guidelines when cleaning the monitor: • Always unplug the monitor before
  • Acer V183HL | User Manual - Page 4
    power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not
  • Acer V183HL | User Manual - Page 5
    or its equivalent, 4.6 meters (15 feet) maximum length. Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to performance, indicating a need for service • the product does not operate normally after following the operating instructions
  • Acer V183HL | User Manual - Page 6
    and obey all signs and instructions. Potentially explosive atmospheres include areas . Switch off the device near gas pumps at service stations. Observe restrictions on the use of radio equipment burden placed on the environment. We at Acer are very conscious of the environmental effects of
  • Acer V183HL | User Manual - Page 7
    your company's health and safety department. The following section provides tips for more comfortable computer use. Finding your comfort zone Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the
  • Acer V183HL | User Manual - Page 8
    eyes frequently. • Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. • Blink frequently to keep your eyes good work habits Develop the following work habits to make your computer use more relaxing and productive: • Take short breaks regularly and
  • Acer V183HL | User Manual - Page 9
  • Acer V183HL | User Manual - Page 10
    Europe SA Via Cantonale, Centro Galleria 2 6928 Manno Switzerland Hereby declare that: Product:: LCD Monitor Trade Name: Acer Model Number: V183HL Series Model Type: SKU Number: V183HL 0~9, a ~ z, or A ~ Z) Is compliant with the essential requirements and other relevant provisions of
  • Acer V183HL | User Manual - Page 11
    following local manufacturer/importer is responsible for this declaration: Product name: LCD Monitor Model number: V183HL SKU number: V183HL******** (* can be 0 - 9, A - Z or blank) Name of responsible party: Acer America Corporation Address of responsible party: 333 West San Carlos St. San
  • Acer V183HL | User Manual - Page 12
    image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability. Energy Energy-saving mode after a certain time - beneficial both for the user
  • Acer V183HL | User Manual - Page 13
    LCD monitors Information for your safety and comfort Safety instructions Cleaning your monitor Connecting/disconnecting the device Accessibility Safe listening Warnings Using electrical power Product servicing How to adjust a setting Acer eColor Management User Troubleshooting VGA mode DVI mode 1
  • Acer V183HL | User Manual - Page 14
    2
  • Acer V183HL | User Manual - Page 15
    that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor User's guide Quick start guide D-sub cable DVI cable (only dualinput models) AC power cord Audio cable (Option)
  • Acer V183HL | User Manual - Page 16
    English 2 Attaching/removing the base Attaching: Align the release button on the bottom of the monitor with the corresponding slots on the bottom of the base. Removing: Press the release button as indicated, then pull in the direction of the arrow
  • Acer V183HL | User Manual - Page 17
    long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. The monitor supports the DDC2B
  • Acer V183HL | User Manual - Page 18
    pin assignment 1 5 6 10 11 15 15-pin color display signal cable PIN No. Description 1 Red 2 Green 3 Blue 4 Monitor ground 5 DDC-return 6 R-ground 7 G-ground 8 B-ground PIN No. Description 9 +5 V 10 Logic ground 11 Monitor ground 12 DDC-serial data 13 H-sync 14 V-sync 15 DDC-serial clock
  • Acer V183HL | User Manual - Page 19
    TMDS data 1/3 shield 12 NC PIN No. Description 13 NC 14 +5 V power 15 GND (return for +5 V hsync.vsync) 16 Hot-plug detection 17 TMDS data 0- 18 TMDS data 0+ 19 TMDS data 0/5 shield 20 NC 21 NC 22 TMDS clock shield 23 TMDS clock+ 24 DDC TMDS clock-
  • Acer V183HL | User Manual - Page 20
    6 English Standard timing table Mode 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 MAC VESA SVGA SVGA SVGA SVGA MAC XGA XGA XGA MAC VESA VESA SXGA SXGA VESA WXGA WXGA Resolution 640 x 480 60 Hz 640 x 480 72 Hz 640 x 480 640 x 480 75 Hz 66.66 Hz
  • Acer V183HL | User Manual - Page 21
    the power cord to the monitor, then to a properly grounded AC outlet. 3 Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 4 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem.
  • Acer V183HL | User Manual - Page 22
    English 8 User controls Front panel controls 1 Power LED: Lights up to indicate the power is turned on. 2 Power switch: Turns the power on or off. 3.4 < / > : Press < or > to navigate to the desired function, press Enter to select the function. Press < or > to change the settings of the current
  • Acer V183HL | User Manual - Page 23
    exit and save, select the exit function. If you want to adjust any other function, repeat steps 2 to 4. A Acer eColor Management: If "Acer eColor Management" is selected, the Acer eColor Management OSD will appear. B User: If "User" is selected, the standard OSD will appear. I. Only analog-input
  • Acer V183HL | User Manual - Page 24
    English 10 Acer eColor Management • Operation instructions 1 Press the Empowering Key to open the Acer eColor Management OSD and access the scenario modes. 2 Press "" to select the mode. 3 Press the Auto-adjust button to confirm the mode and run
  • Acer V183HL | User Manual - Page 25
    English 11 User Main Sub menu menu icon icon Sub menu item Contrast Brightness Description Adjusts the contrast between the foreground and background of the screen image. Adjusts the background brightness of the screen image. ACM ACM (Adaptive Contrast Management) ACM On/Off switch, default
  • Acer V183HL | User Manual - Page 26
    signal from D-Sub or DVI-D or HDMI Select Wide mode setting for Full screen, Aspect ratio or 1:1 mode Turns on/off DDC/CI support Shows the resolution, H/V frequency, input port and serial number for current input. Clears Auto-configuration changes and sets the color temperature to warm. Saves user
  • Acer V183HL | User Manual - Page 27
    Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA mode Problem system. In case of a missing image, please select another resolution or vertical refresh rate. Wait for a few seconds after
  • Acer V183HL | User Manual - Page 28
    maximum or reset to their default settings. Check the power switch. Amber Check if the AC power cord is properly connected to the monitor. Check if the video signal cable is properly connected at the back of monitor. Check that the computer system is switched on and in power saving/ standby mode.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

Acer LCD Monitor
User's Guide