Acer V196HQL User Manual

Acer V196HQL Manual

Acer V196HQL manual content summary:

  • Acer V196HQL | User Manual - Page 1
    Acer LCD Monitor User's Guide
  • Acer V196HQL | User Manual - Page 2
    Acer LCD Monitor User's Guide Original Issue: 01/2013 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual to your computer. All correspondence
  • Acer V196HQL | User Manual - Page 3
    LCD monitors The following are normal with the LCD monitor and do not indicate a problem instructions marked on the product. Cleaning your monitor Please carefully follow these guidelines when cleaning the monitor: • Always unplug the monitor sure both the LCD monitor and the computer are turned off
  • Acer V196HQL | User Manual - Page 4
    the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly product near water. • Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. • Slots
  • Acer V196HQL | User Manual - Page 5
    the load should not exceed 80% of the power strip's input rating. • This product's power cord is equipped with details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly service • the product does not operate normally after following the operating instructions
  • Acer V196HQL | User Manual - Page 6
    and obey all signs and instructions. Potentially explosive atmospheres include Switch off the device near gas pumps at service stations. Observe restrictions on the use of radio acer-group.com/public/Sustainability/sustainability Visit www. acer-group .com for further information on the features
  • Acer V196HQL | User Manual - Page 7
    more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer‐group.com/public/Sustainability/ LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear
  • Acer V196HQL | User Manual - Page 8
    your company's health and safety department. The following section provides tips for more comfortable computer use. Finding your comfort zone Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the
  • Acer V196HQL | User Manual - Page 9
    eyes frequently. • Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. • Blink frequently to keep your eyes good work habits Develop the following work habits to make your computer use more relaxing and productive: • Take short breaks regularly and
  • Acer V196HQL | User Manual - Page 10
    20020 Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Declare under our own responsibility that the product: Product: LCD Monitor Trade Name: Acer Model Number: V196WL SKU Number: V196WL xxxxxx; ("x" = 0~9, a ~ z, A ~ Z, or blank) To which this declaration refers
  • Acer V196HQL | User Manual - Page 11
    local Manufacturer /Importer is responsible for this declaration: Product: Model Number: SKU Number: LCD Monitor V 196WL V 196WL xxxxxx ("x" = 0~9, a ~ z, A ~ Z or Blank) Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St. Suite 1500 San
  • Acer V196HQL | User Manual - Page 12
    instructions Cleaning your monitor Connecting/disconnecting the device Accessibility Safe listening Warnings Using electrical power Product servicing Additional safety information IT equipment recycling information Disposal instructions LCD a setting Acer eColor Management Troubleshooting VGA mode
  • Acer V196HQL | User Manual - Page 13
    that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide Audio Cable (Option) V196WL D-sub cable (Option) DVI cable (Option) AC power cord
  • Acer V196HQL | User Manual - Page 14
    screen. ① ④② ③ Remove: Reverse the steps to remove the base. Screen position adjustment To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to hold the edges of the monitor as shown below. The monitor can be adjusted to 25 degrees up or 5 degrees down. 25
  • Acer V196HQL | User Manual - Page 15
    long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. The monitor supports the DDC2B
  • Acer V196HQL | User Manual - Page 16
    pin assignment 1 5 6 10 11 15 15-pin color display signal cable PIN No. Description 1 Red 2 Green 3 Blue 4 Monitor ground 5 DDC-return 6 R-ground 7 G-ground 8 B-ground PIN No. Description 9 +5 V 10 Logic ground 11 Monitor ground 12 DDC-serial data 13 H-sync 14 V-sync 15 DDC-serial clock
  • Acer V196HQL | User Manual - Page 17
    TMDS data 1/3 shield 12 NC PIN No. Description 13 NC 14 +5 V power 15 GND (return for +5 V hsync.vsync) 16 Hot-plug detection 17 TMDS data 0- 18 TMDS data 0+ 19 TMDS data 0/5 shield 20 NC 21 NC 22 TMDS clock shield 23 TMDS clock+ 24 DDC TMDS clock- * only for certain models
  • Acer V196HQL | User Manual - Page 18
    1 VGA 640×480 60 Hz 2 MAC 640×480 66.66 Hz 3 VESA 720×400 70 Hz 4 SVGA 800×600 56 Hz 5 SVGA 800×600 60 Hz 6 XGA 1024×768 60 Hz 7 XGA 1024×768 70 Hz 8 VESA 1152×864 75 Hz 9 VESA 1280×720 60 Hz 10 WXGA 1280×800 60 Hz 11
  • Acer V196HQL | User Manual - Page 19
    LCD monitor and the line-out port on the computer with the audio cable. 4 Turn on the monitor and computer Turn on the monitor first, then the computer. This sequence is very important. 5 If the monitor does not function properly, please refer to the troubleshooting section to diagnose the problem
  • Acer V196HQL | User Manual - Page 20
    LED: To turn the monitor ON or OFF. Lights up to indicate the power is turned ON. Using the Shortcut Menu Press the function button to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Empowering: Press the Empowering Key to open the Acer eColor
  • Acer V196HQL | User Manual - Page 21
    eColor Management English Operation instructions Step 1: Press " " Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press " " or " " to select the mode Step 3: Press " AUTO " Key to confirm the mode and exit the eColor menu. Features and Benefits Main Menu icon
  • Acer V196HQL | User Manual - Page 22
    English 10 Adjusting the OSD settings Note: The following content is for general reference only. Actual product specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD
  • Acer V196HQL | User Manual - Page 23
    English 11 Adjusting the OSD position 1 Press the MENU key to bring up the OSD. 2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust.
  • Acer V196HQL | User Manual - Page 24
    English 12 Adjusting the setting 1 Press the MENU key to bring up the OSD. 2 Using the / keys, select Setting from the OSD. Then navigate to the feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Menu Language and other important settings.
  • Acer V196HQL | User Manual - Page 25
    English 13 Product information Information 1440 x 900 H:65KHz V:60Hz VGA Input S/N:ETL5309 1326350380B3742 1 Press the MENU key to bring up the OSD. 2 Using the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input.
  • Acer V196HQL | User Manual - Page 26
    English Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA mode Problem No picture visible LED status Blue Off Remedy Using the OSD, adjust brightness and contrast to maximum or reset to
  • Acer V196HQL | User Manual - Page 27
    DVI mode Problem No picture visible 15 LED status Blue Off Remedy Using the OSD, adjust brightness and contrast to maximum or reset to their default settings. Check the power switch. Amber Check if the AC power cord is properly connected to the monitor. Check if the video signal cable is
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

Acer LCD Monitor
User's Guide