Acer VG270S User Manual
Acer VG270S Manual
 |
View all Acer VG270S manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer VG270S manual content summary:
- Acer VG270S | User Manual - Page 1
Acer LCD Monitor User Guide - Acer VG270S | User Manual - Page 2
. Acer Incorporated. All Rights Reserved. Acer LCD Monitor User Guide Original Issue: 09/2019 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual - Acer VG270S | User Manual - Page 3
reference. Follow all warnings and instructions marked on the product. Acer monitor is purposed for video and visual display of information obtained from electronic devices. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. • Due to the nature - Acer VG270S | User Manual - Page 4
power cord from the electrical outlet. Safe listening To protect your hearing, follow these instructions. • Gradually increase the volume until you can hear it clearly and comfortably and without distortion. • After setting the volume level, do not increase it after your ears have adjusted. • Limit - Acer VG270S | User Manual - Page 5
power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, type SPT-2, rated 7 A 125 V minimum, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length. Product servicing Do not attempt to service this product yourself - Acer VG270S | User Manual - Page 6
and help when recycling, please go to this website: http://www.acer-group.com/public/Sustainability/sustainability01.htm Visit www.acer-group.com for further information on the features and benefits of our other products. Disposal instructions Do not throw this electronic device into the trash when - Acer VG270S | User Manual - Page 7
English LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled - Acer VG270S | User Manual - Page 8
English Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. - Acer VG270S | User Manual - Page 9
(MI), Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Product: Trade Name: Model Number: SKU Number: LCD Monitor Acer VG270 VG270 xxxxxx; ("x" = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in - Acer VG270S | User Manual - Page 10
S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Supplier's Declaration of Conformity This device complies with Part : Phone No.: Fax No.: LCD Monitor VG270 VG270 xxxxxx ("x" = 0~9, a ~ z, or A ~ Z) Acer America Corporation 333 West San Carlos St. Suite - Acer VG270S | User Manual - Page 11
power 4 Product servicing 5 Potentially explosive environments 6 Additional safety information 6 IT Equipment Recycling Information 6 Disposal instructions 6 LCD pixel statement 18 Using the Shortcut Menu 19 The Function page 20 Troubleshooting 27 HDMI /DP Mode (Optional) 27 - Acer VG270S | User Manual - Page 12
unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide AC Power cord HDMI Cable (Optional) LCD Monotor NITRO VG0 series-VG270 USER GUIDE DP Cable (Optional) - Acer VG270S | User Manual - Page 13
English SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the tilt of the monitor. • Attaching the Base Note: Remove the monitor and monitor base from its packaging.Carefully place the monitor face-down on a stable surface -- use a cloth to avoid scratching - Acer VG270S | User Manual - Page 14
, type SVT wire and plug rated 10 A/125 V. • For units using 220/240 V AC: Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. Power saving The monitor will be driven - Acer VG270S | User Manual - Page 15
a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported resolutions and corresponding timing. The monitor supports the DDC2B standard. 19-pin color display signal cable* PIN No. Description 1 TMDS Data2+ 3 TMDS Data25 - Acer VG270S | User Manual - Page 16
resolution) 1920x1080 165Hz * * VG270 S&VG270 V can be overclocked to a higher refresh rate than advertised by the panel specification.This function can be use the system control panel to set the maximum refresh rate. Important: This device is designed to support refresh rate overclocking - Acer VG270S | User Manual - Page 17
the power cords of your computer and your monitor into a nearby electrical outlet. Note: Audio output is only for audio output model. Please check user manual for more instruction. - Acer VG270S | User Manual - Page 18
b. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults. a. Press to view Main page.Press again to enter hotkey2 function. b. When the Function Menu is active, press this button to - Acer VG270S | User Manual - Page 19
your LCD monitor. Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality and general settings. For advanced settings, please refer to following page: Main page Mode Standard Brightness 80 Input HDMI 1. Menu OSD 2. Hot Key1 (Modes,Brightness,Gamma,Contrast,Blue Light - Acer VG270S | User Manual - Page 20
The Function page Open the Function page to adjust the functions, settings which you want using the arrows. When you are done, toggle exit current page and store. Picture Picture Color Audio Gaming OSD System Save Settings to... Move Mode - User Brightness Contrast Black Boost Blue Light ACM HDR - Acer VG270S | User Manual - Page 21
"Low Blue Light Content" standard. 9. ACM: Turn ACM on or off. Note: Set to "On", will be based on the current screen to dynamic contrast adjustment. 10. HDR: signal. Note: 1. When HDR = Auto, the Modes will also be automatically set to "HDR". 2. When HDR = Auto, some parameters :(ACM, Gamma, - Acer VG270S | User Manual - Page 22
G Gain B Gain R Bias G Bias B Bias Enter Mode - User Modes sRGB Mode Grayscale Mode 6-axis Hue 6-axis Saturate 2.2 Warm 50 50 50 X 50 50 50 Off Off X Save Settings to... Move Enter 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Color from the OSD - Acer VG270S | User Manual - Page 23
to the left or right to adjust the sliding scales. 4. Over Drive: Select Off, Normal, or Extreme. 5. FreeSync: To control support FreeSync or not, default is On Note: 1. If FreeSync is "ON", then the Over Drive selection is set to "Normal" automatically. 2. If FreeSync is "OFF", then the user can - Acer VG270S | User Manual - Page 24
up the processing time of the display switching process Note: 1. FreeSync is On, the Ultra-Low Latency automatic set to On and gray out unavailable. 2. Ultra-low latency is not supported at resolutions below 800x600. 9. Aim point: Show an Aim point on the screen for shooting games. OSD Picture - Acer VG270S | User Manual - Page 25
Toggle to the left or right to control functions. 4. Input: Select the source from HDMI1, HDMI2, DP. 5. Auto Source: The default is "On", which can support auto search for signal source in order Note: Surround application must set Auto Source is "Off". 6. DP Format: Default is DP1.2, can selection - Acer VG270S | User Manual - Page 26
Blue Light, Over Drive) and shortcut keys 2 (Modes, Volume, Brightness, Gamma, Contrast, Blue Light, Over Drive). 9. DDC/CI: Allows the monitor settings to be set through the software on the PC Note: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent - Acer VG270S | User Manual - Page 27
monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. HDMI /DP Mode (Optional) Problem No picture visible LED status Blue Off Remedy Using the OSD menu, adjust brightness and contrast to maximum or reset to their default setting. Check
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
 |
 |
Acer LCD Monitor
User Guide