Acer Veriton 5100 Veriton 5100/7100 Service Guide - Page 46
Suspend, Disabled, Enabled, Parameter, Description, Options, Restart on AC/ Power Failure
View all Acer Veriton 5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Parameter Power Switch < 4 sec. System Wake-up Event Modem Ring Indicator PCI Power Management RTC Alarm Resume Day Resume Time Restart on AC/ Power Failure ACPI Sleep State Description Options Lets you specify whether to automatically turn off the machine or put the system to Suspend mode when the power switch is pressed for less than 4 seconds. Suspend or Power Off Lets you specify the activity that will resume the system to normal operation. Wakes the system from Sleep mode once Disabled or Enabled any fax/modem activity is detected. Allows the system to be awaken by the PME Enabled or Disabled function. Allows you to set a certain time on a certain Disabled or Enabled day to wake-up your system from suspend mode. If RTC alarm is enabled, the system will User Input resume operation at the time indicated here. If RTC alarm is enabled, the system will User Input resume operation at the time indicated here. When power failure occurs, your system automatically stops functioning. Setting this parameter to Enabled lets you set your computer to automatically turn on once power resumes. The Disabled setting leaves the computer off. Disabled or Enabled When set to S1, system enters standby mode when power management mode is enabled. When set to S3, system enters suspend to RAM mode. S1 or S3 40 Chapter 2