Acer Veriton 5200D Veriton 5200D Service Guide - Page 45

Parameter USB Keyboard Support USB Mouse Support Init Display First AC97 Audio IDE HDD Block Mode Onboard FDC Controller Onboard Serial Port 1 Onboard Serial Port 2 Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA Game Port Address Description Options This item lets you enable or disable the USB keyboard driver within the onboard BIOS. The keyboard driver simulates legacy keyboard command and lets you use a USB keyboard during POST or after boot if you don't have a USB driver in the operating system. Enabled Disabled This item lets you enable or disable the USB mouse driver within the onboard BIOS. The mouse driver simulates legacy mouse command and lets you use a USB mouse during POST or after boot if you don't have a USB driver in the operating system. Enabled Disabled If you installed a PCI VGA card and an AGP card at the same time, this item lets you decide which one is the initial display card. AGP PCI Enabling the on-die AC97 Audio if no add-on PCI Audio Auto device. Disabled This feature enhances disk performance by allowing multisector data transfers and eliminates the interrupt handling time for each sector. Most IDE drives, except with old designs, can support this feature. Enabled Disabled Setting this parameter to Enabled allows you to connect your floppy disk drives to the onboard floppy disk connector instead of a separate controller card. Change the setting to Disabled if you want to use a separate controller card. Enabled Disabled This item allows you to assign an address and interrupt for the board serial port. 3F8/ IRQ4 Auto 2F8/ IRQ3 3E8/ IRQ4 2E8/ IRQ3 Disabled This item allows you to assign an address and interrupt for the board serial port. 2F8/ IRQ3 Auto 3F8/ IRQ4 3E8/ IRQ4 2E8/ IRQ3 Disabled This item controls the onboard parallel port address and 378/ IRQ7 interrupt. 3BC/ IRQ7 NOTE: If you are using an I/O card with a parallel port, 278/ IRQ7 make sure that the addresses and IRQs do not conflict. Disabled IBM PC/AT and PS/2 compatible bi-directional parallel port. Enhanced Parallel Port (EPP)-compatible with EPP1.7 and EPP 1.9. Extended Capabilities Port (ECP) Specification by Microsoft and HP. IEEE 1284 compliant Printer Show SPP PP1.9+ECP Printer EPP1.7+SPP EPP!.7+ECP Selects the ECP Mode DMA Channel. 3 1 Selects the Game Port Address. 201 209 Disabled Chapter 2 36