Acer Veriton 5800 Veriton 5800/6800/7800 Service Guide (MSI MB) - Page 40

Parameter Description Options Virus Warning This feature allows you to enable the VIRUS warning function for IDE Hard Disk boot sector protection. If this function is enabled and there is someone attempt to write data into this area, BIOS will show a warning message on screen and the alarm will beep. Enabled Disabled CPU L1&L2 Cache This feature allows you to enable or disable the Enabled CPU L1&L2 cache function. Disabled Silent Boot This features allows you to enable or disable if Enabled the screen logo to display or no during POST Disabled Configuration Table This feature allows you to enable or disable if showing summary screen or not Enabled Disabled Quick Power On Self Test This feature allows the system to skip certain tests while booting. When this function is enabled, it will decrease the time needed to boot the system, which means to quick power on self test function Enabled Disabled Hard Disk Boot Priority Press [Enter] to enter the sub menu to select Hard Disk Boot Device Priority. Use wx to select a device, then press to move it up, or < - > to move it down the list. First / Second / Third Boot Device The item allows you to set the sequence of boot Floppy, LS120, Hard Disk, CD-ROM, device where BIOS attempts to load the disk ZIP, USB-FDD, USB-ZIP, USB- operating system. CDROM, USB-HDD, LAN, Disabled Boot other Devices This item allows you to enable or disable to boot Enabled from other device Disabled Boot Up NumLock Status This item allows you to enable or disable to set Enabled keyboard is number keys or arrow keys Disabled Gate A20 Option This option is used to set up the A20 signal control necessary for access to the 1MB memory. Fast : Let chipset control Gate 20 Normal : A pin in the keyboard controller Security Option Select whether the password is required every time the system boots or only when you enter setup. System Setup APCI Mode This option is used to set up enable or disable Enabled the APCI funtion Disabled Limit CPUID Max. to 3 Limit CPU ID function to 3. It helps to solve old OS like NT4 installing issue. Enabled : Limit CPUID Maximum value to 3 when use older OS like NT4. Disabled : Disables CPUID Limit for Windows XP CPU Thermal Monitor 2(TM2) When Enable and CPU Die temperature Reach Threshold. Both core Clock Ratio & Voltage will be Reduced. When Disabled and CPU DIe Tlmperature Reach Threshold, Both Core CLock Ratio & Voltage will not be Reduced. Enabled Disabled ASF support Short for Advanced Streaming Format. A streaming multimedia file format developed by Microsoft. Enabled Disabled On-Chip Frame Buffer Size This fearure allows you to select the frame buffer size. 1MB 8MB Hidden Setting Description HDD S.M.A.R.T Capability S.M.A.R.T which allows your hard disk to report Enabled any read/write errors and issue a warning when Disabled LDCM installed 38 Chapter 2