Acer Veriton 5800 Veriton 5800/6800/7800 Service Guide (MSI MB) - Page 44

Parameter On-Chip Primary/Secondary PCI IDE On-Chip SATA Mode USB 2.0 Controller USB Controller USB Keyboard Support USB Mouse Support Azalia Codec Onboard H/W LAN Onboard LAN Boot ROM PS2 Keyboard Wakeup PS2 Mouse Wakeup Onboard Serial Port 1/2 UART Mode Select Description Options This feature allows you to enable or disable the on-chip IDE port. If a hard disk controller card is used, set this item to Disabled. Enabled Disabled This feature allows you to select the on-chip SATA mode. DIsabled: Disable the SATA controller Auto: Auto arranged by BIOS Combined: PATA and SATA are combined. Max of 2 IDE drives in each channel. Enhanced: Enable both SATA and PATA. Max of 6 IDE drives are supported. Non-Combined: SATA is operating in legacy mode. Disabled Auto Combined Enhanced Non-Combined Enable this item if the system supports USB 2.0 Enabled : Enable USB 2.0 Controller Disabled : Disable USB 2.0 Controller This item is used to enable or disable the on-chip Enabled : Enable USB Controller USB Disabled : Disable USB Controller This item lets you enable or disable the USB keyboard driver within the onboard BIOS. The keyboard driver is simulates legacy keyboard command and lets you use a USB keyboard during POST or after boot if you do not have a USB driver in the operating system Enabled : Enable USB Keyboard Support Disabled : Disable USB Keyboard Support This item lets you enable or disable the USB mouse driver within the onboard BIOS. The keyboard driver simulates legacy mouse command and lets you use a USB mouse during POST or after boot if you do not have a USB driver in the operating system. Enabled : Enable USB Mouse Support Disabled : Disable USB Mouse Support This feature allows you to enable or disable the Auto Azalia Audio. DIsabled This function is used to set whether the onboard Enabled LAN card is enabled. Disabled This function decide whether to invoke the boot Enabled ROM of the onboard LAN chip Disabled This function decide whether to wakeup by PS2 Enabled keyboard. Disabled This function decide whether to wakeup by PS2 Enabled Mouse. Disabled This option is used to assign the I/O address and interrupt request (IRQ) for onboard serial port 1 or 2 Auto : BIOS will automatically setup the port 1 or 2 address 3F8/IRQ4 (Serial Port 1 default) 2F8/IRQ3 (Serial Port 2 default) 3E8/IRQ4 2E8/IRQ3 Diabled : Disable onboard Serial port 1 or 2 This feature allows to select the UART mode. Normal IrDA ASKIR 42 Chapter 2