Acer Veriton 5800 Veriton 5800/6800/7800 Service Guide (MSI MB) - Page 85

BIOS Messages Keyboard Error Or No Keyboard Present Keyboard is locked out - Unlock the key Memory Test: Memory test fail Override enabled - Defaults loaded Press TAB to show POST screen Primary master hard disk fail Primary slave hard disk fail Secondary master hard disk fail Secondary slave hard disk fail Action/FRU Cannot initialize the keyboard. Make sure the keyboard is attached correctly and no keys are pressed during POST. To purposely configure the system without a keyboard, set the error halt condition in Setup to HALT ON ALL, BUT KEYBOARD. The BIOS then ignores the missing keyboard during POST. This message usually indicates that one or more keys have been pressed during the keyboard tests. Be sure no objects are resting on the keyboard. This message displays during a full memory test, counting down the memory areas being tested. If POST detects an error during memory testing, additional information appears giving specifics about the type and location of the memory error. If the system cannot boot using the current CMOS configuration, the BIOS can override the current configuration with a set of BIOS defaults designed for the most stable, minimal-performance system operations. System OEMs may replace the Phoenix Technologies Award BIOS POST display with their own proprietary display. Including this message in the OEM display permits the operator to switch between the OEM display and the default POST display. POST detects an error in the primary master IDE hard drive. POST detects an error in the secondary master IDE hard drive. POST detects an error in the primary slave IDE hard drive. POST detects an error in the secondary slave IDE hard drive. Chapter 4 83