Acer Veriton M4610G Acer Veriton M4610, M4610G, M4618G Desktop Service Guide - Page 27

Integrated Peripherals Parameter Onboard SATA Controller Onboard SATA Mode Onboard USB Controller Legacy USB Support USB Storage Emulation Onboard Graphics Controller Onboard Audio Controller Onboard LAN Controller Onboard LAN Option ROM Serial Port1 Address Serial Port2 Address Parallel Port Address Parallel Port Mode Parallel Port IRQ Description Enables or disables the onboard SATA controller. Select an operating mode for the onboard SATA. Enables or disables the onboard USB controller. Enables or disables support for legacy USB devices. If Auto, USB device equal or less than 2GB will be emulated as Floppy and remaining as harddrive. Forced FDD option can be used to force a HDD formatted drive to boot as FDD (Ex.ZIP drive). This item allows you to enable or disable the onboard controller. Enables or disables the onboard audio controller. Enables or disables the onboard LAN controller. Enables or disables the load of embedded option ROM for onboard network controller. Use this item to enable or disable the onboard COM1 serial port, and to assign a portaddress. Use this item to enable or disable the onboard parallel port, and to assign a portaddress. Use this item to enable or disable the onboard COM2 serial port, and to assign a portaddress. Use this item to select the parallel port mode. You can select Normal (StandardParallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), orBpp (Bi-Directional Parallel Port). Use this item to assign IRQ to the parallel port. Option Enabled Disabled Native IDE AHCI Enabled Disabled Enabled Disabled Auto Floppy Hard Disk Enabled Disabled Enabled Disabled Enabled Disabled Enabled Disabled Disabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Disabled 378 278 3BC Normal EPP ECP EPP+ECP IRQ5 IRQ7 Chapter 2 19