Acer Veriton N260G Acer Veriton N260G Series Service Guide - Page 63

password verification. Unknown BIOS error. Error This message is displayed when ADM module is not present in code = 004Ah the AMIBIOS8 ROM. Unknown BIOS error. Error This message is displayed when language module is not code = 004Bh present in the AMIBIOS8 ROM. Floppy Controller Failure Error in initializing legacy Floppy Controller. USB eModule Error Messages Message Displayed Description Warning! Unsupported USB This message is displayed when a non-bootable USB device is device found and disabled! enumerated and disabled by the BIOS. Warning! Port 60h/64h This message is displayed to indicate that port 60h/64h emulation is not supported emulation mode cannot be enabled for this USB host by this USB Host Controller! controller. This condition occurs if USB KBC emulation option is set for non-SMI mode. Warning! EHCI controller This message is displayed to indicate that EHCI controller is disabled. It requires 64bit disabled because of incorrect data structure. This condition data support in the BIOS. occur if the USB host controller needs 64-bit data structure while the USB is ported with 32-bit data structure. SMBIOS eModule Error Messages Message Displayed Not enough space in Runtime area!!. SMBIOS data will not be available. Description This message is displayed when the size of the SMBIOS data exceeds the available SMBIOS runtime storage size CPU eModule Error Messages Message Displayed Warning! This system board does not support the power requirements of the installed processor. The processor will be run at a reduced frequency, which will impact system performance. area!!. SMBIOS data will not be available. Description This message is displayed when the power requirements of the board do not match the power requirement of the CPU. 57