Acer Veriton X4610G Veriton X461x Desktop Series Service Guide - Page 12

Rear I/O connectors • 1 D-Sub port • 1 DVI-D port • 6 USB 2.0 ports • 2 USB 3.0 ports(reserve by BOM option, default w/o) • 1 RJ45 LAN port • 3 mini audio jacks • At least five HD audio in/output • 2 PS2 keyboard/mouse connector • 1 serial port On-board connectors • 1 LGA 1155 CPU socket • 4 DDR3 DIMM memory sockets • 1 PCI Express x16 slot • PCI Express x 1 slot • 3 SATA connectors( 6Gb/s*1 and 3Gb/s*2 for Q65 and reserve 3Gb/s*1 for BOM option. Must use different color to define SATAIII and SATAII. ) • Four 2*5 pin Intel FPIO specification USB pin connectors (follow Intel FPIO standard Specification) • One 2*5 pin Intel FPIO spec. Microphone In/ Headphone Out pin connectors • One 4 pin CPU Fan connector • One 3 pin System Fan connector with linear circuit • One 4 pin SPDIF header closed to PCIEx16 slot • One 24 pin ATX interface PS3/PS2 SPS connector. • One 2*7 pin front panel IO header • One Jumper for clear CMOS • One on board buzzer • One 2pin OBR header • Two reserved 2pin GPIO connector • One Serial port header (COM2) (near rear IO is preferable) • One 2pin Intrusion Alarm connector • One LPT 2*13pin header (near rear IO is preferable) • One 2*4 pin internal speaker header • One 3pin ME enable/disable connector (with 1 jumper) • Color management for on board connecter (please refer to Acer spec) • Header Naming should follow MB Header Naming System BIOS • Kernel: AMI Aptio Kernel with Acer skin/copyright. • Type: • Use SPI Flash • Size: 64M 4 Chapter 1