Acer X1120H User Manual

Acer X1120H Manual

Acer X1120H manual content summary:

  • Acer X1120H | User Manual - Page 1
    Acer Projector X1120H/X1220H/X1320WH Series User's Manual
  • Acer X1120H | User Manual - Page 2
    © 2011. All Rights Reserved. Original Issue: 07/2011 Acer Projector X1120H/X1220H/X1320WH Series Model number Serial number Date of purchase Place of purchase
  • Acer X1120H | User Manual - Page 3
    and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product probably cause unexpected short circuits and may damage rotor devices or the lamp. Using electrical power • This product should be operated from the type
  • Acer X1120H | User Manual - Page 4
    devices that may interfere with the performance of this product. • Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or
  • Acer X1120H | User Manual - Page 5
    performance, indicating a need for service. • The product does not operate normally after following the operating instructions. Note: Adjust only those Do not look into the projector's lens when the lamp is on. The light may hurt your eyes. • Turn on the projector first and then signal sources
  • Acer X1120H | User Manual - Page 6
    The projector may fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling-mounted installation. Only use an Acer ceiling mount kit and ensure it is securely installed. Protect your hearing To protect your hearing, follow these instructions. • Increase
  • Acer X1120H | User Manual - Page 7
    't hear people speaking near you. Disposal instructions Do not throw this electronic device into acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp
  • Acer X1120H | User Manual - Page 8
    Connecting the projector 8 Turning the projector on/off 9 Turning the projector on 9 Turning the projector off 10 Acer Empowering Technology 20 Onscreen Display Menus 22 Color 23 Image 24 Setting 27 Management 31 Audio 31 3D 32 Language 33 3D projection 34 Using DLP 3D
  • Acer X1120H | User Manual - Page 9
    Using the stereoscopic player 36 Using 3D glasses (optional) 37 Watching 3D DVD content 37 Appendices 39 Troubleshooting 39 LED and alarm definitions 42 Replacing and cleaning the dust filter 43 Replacing the lamp 44 Ceiling mount installation 45 Specifications 48 Compatibility
  • Acer X1120H | User Manual - Page 10
    DLP projector, feautring: • DLP technology. • X1120H series: Native 800 x 600 SVGA resolution. • X1220H series : Native 1024 x 768 XGA resolution. • X1320WH: Native 1280 X 800 resolution. • Acer 1080p) supported. • Lower power consumption and economy (ECO) mode extends lamp life. • Acer EcoProjeciton
  • Acer X1120H | User Manual - Page 11
    items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. 1 Projector Power cord VGA cable Remote control acer Projector Batteries Quick Start Guide Quick Start Guide Carrying case User's Manual CD Screw pack Dust filter (optional)
  • Acer X1120H | User Manual - Page 12
    English English Projector overview Front / top 1 2 3 4 5 1 6 3 7 8 8 # Description 1 Lamp cover 2 Zoom ring 3 Focus ring 4 Ventilation Rear # Description 5 Remote control receivers 6 Zoom lens 7 Control panel 8 Ventilation (inlet) 12 3 4 5 6 AUDIO IN HDMI AUDIO OUT VIDEO VGA1-
  • Acer X1120H | User Manual - Page 13
    Changes the active source. Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). Automatically synchronizes the projector to the input source. Power indicator LED Lamp/Temp Indicator LED • Press MENU to launch the onscreen display (OSD) menu, back to the
  • Acer X1120H | User Manual - Page 14
    4 ASPECT RATIO 5 ZOOM 6 Four directional select keys Description Sends signals to the projector. Pauses the screen image. Refer to "Turning the projector on/off" on page 9. To choose the desired aspect ratio. Zooms the projector display in or out. Use up, down, left, right buttons to select
  • Acer X1120H | User Manual - Page 15
    VGA to change source to the VGA1-IN/ VGA2-IN connector. This connector supports analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr (480i/576i) and RGBsync source. 14 RESYNC Automatically synchronizes the projector to the input source. 15 Empowering Launches Acer functions: eView, eTimer, Key
  • Acer X1120H | User Manual - Page 16
    source to S-Video. This function is only available when a USB cable is not connected to a computer. Note: Buttons marked with * are not operational on this projector.
  • Acer X1120H | User Manual - Page 17
    USB English English 8 Getting started Connecting the projector 1 2 HDMI RS232 HDMI VGA USB D-Sub D-Sub 3 4 5 3 D-Sub D-Sub D-Sub AUDIO IN HDMI MINI USB 1 VGA1-IN RS-232 AUDIO OUT VIDEO VGA2-IN VGA-
  • Acer X1120H | User Manual - Page 18
    on 1 Ensure that the power cord and signal cable are securely connected. The power indicator LED will light blue. 2 Turn on the projector by pressing the POWER button on the control panel. The power indicator LED will flash and then turn blue. 3 Turn on your source (computer, notebook,
  • Acer X1120H | User Manual - Page 19
    LED temp indicator will blink. Contact your local dealer or service center. • Fan Fail. Lamp will automatically turn off soon. This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will
  • Acer X1120H | User Manual - Page 20
    English English 11 To raise/lower the image: 1 Use the elevator foot raise/lower the image to the desired height. 1 Elevator foot
  • Acer X1120H | User Manual - Page 21
    English English 12 Optimizing image size and distance X1120H/X1220H Series: Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible
  • Acer X1120H | User Manual - Page 22
    13 English English Desired distance (m) Screen size Top (Min zoom) Diagonal W (cm) x (inches) H (cm) From base to top of image (cm) Screen size Top (Max zoom) Diagonal (inches) W (cm) x H (cm) From base to top of image (cm) 1.5 34 69 x 52 68 37 76 x 57 74 2
  • Acer X1120H | User Manual - Page 23
    English English 14 X1320WH Series: Max screen size Min screen size B 93" 77" A 3 m Desired distance Height: 135 cm C Height: 163 cm From base to top of image
  • Acer X1120H | User Manual - Page 24
    15 English English Desired distance (m) Screen size Top (Min zoom) Diagonal W (cm) x (inches) H (cm) From base to top of image (cm) Screen size Top (Max zoom) Diagonal (inches) W (cm) x H (cm) From base to top of image (cm) 1.5 39 83 x 52 68 46 100 x 63 81 2
  • Acer X1120H | User Manual - Page 25
    English 16 Adjusting distance and zoom to optimize image size X1120H/X1220H Series: English A 50" iDmeasgireedsize 2.2 m C 2 m B Desired distance D Height From base to top of image
  • Acer X1120H | User Manual - Page 26
    achieve a desired image size by adjusting either the position or the zoom ring. Example: To obtain an image size of 50" set the projector at a distance between 2 m and 2.2 m from the screen and adjust the zoom level accordingly. Desired image size Distance (m) Top (cm) Diagonal (inches) 30
  • Acer X1120H | User Manual - Page 27
    18 X1320WH Series: English English A 50" iDmeasgireedsize D Height From base to top of image 1.9 m 1.6 m B Desired distance Desired image size Distance (m) Top (cm) Diagonal (inches) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.2x W (cm) x H (cm) 65 x 40 86 x 54 108
  • Acer X1120H | User Manual - Page 28
    Press the MENU button on the control pad to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide for adjusting the calibration and alignment settings, such as screen size and the MENU button anytime to exit the menu and return to the Acer welcome screen.
  • Acer X1120H | User Manual - Page 29
    time control. Please refer to "Onscreen Display Menus" on page 22 for more details. Acer ePower Management Press to launch Acer ePower Management. Acer ePower Management offers a shortcut to save lamp and projector life. Please refer to "Onscreen Display Menus" on page 22 for more details.
  • Acer X1120H | User Manual - Page 30
    Acer e3D Management 21 Press to launch Acer e3D Management. Acer e3D Management offers quick access to 3D functions. Please refer to "Onscreen Display Menus" on page 22 for more details. English English
  • Acer X1120H | User Manual - Page 31
    English English 22 Onscreen Display Menus The projector has a multilingual OSD that allows you to make image adjustments and change a variety of press MENU on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Submenu
  • Acer X1120H | User Manual - Page 32
    function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. The projector will compensate for color deviation due to the wall color to show the correct image tone. Adjust the brightness of the image. • Press to
  • Acer X1120H | User Manual - Page 33
    Y: Adjusts the yellow color. • Color M: Adjusts the magenta color. Note: Saturation and Tint are not supported under computer mode. Image Projection • Front: The factory default setting. • Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection.
  • Acer X1120H | User Manual - Page 34
    image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. Use this function to choose your desired aspect ratio
  • Acer X1120H | User Manual - Page 35
    : Disable overscan on HDMI images. • Overscan: Enable overscan on HDMI images. Note: L.Box function is supported for X1320WH series only. Note: H. Position, V. Position and Frequency functions are not supported under Component video, Video, S-Video and HDMI modes. Note: Tracking function is not
  • Acer X1120H | User Manual - Page 36
    menu location on the display screen. When source lock is turned Off, the projector will search for other signals if the current input signal is lost. When source you exit the OSD menu. • Acer: The default Acer projector startup screen. • User: Use a customized picture from the screen capture function
  • Acer X1120H | User Manual - Page 37
    the startup screen, follow the instructions below. Note: Before proceeding with Change the Startup Screen from the default setting (Acer) to User. • Press Screen Capture to customize projector. Closed Caption Note: This screen capture function is limited to the 4:3 aspect ratio only. Note: For XGA
  • Acer X1120H | User Manual - Page 38
    the timeout function. • Press or to select the timeout interval. • The range is from 10 minutes to 990 minutes. • When the time is up, the projector will prompt the user to enter the password again. • The factory default setting of Timeout(Min.) is Off. User Password • Press to set up or
  • Acer X1120H | User Manual - Page 39
    seconds when the Enter Password or Enter Administrator Password dialog box is currently displayed. • Write down the Unlock ID and contact with Acer service center. They will give you a new Administrator Password according to the Unlock ID. Lock User Startup Screen • By default Lock User Startup
  • Acer X1120H | User Manual - Page 40
    31 Management English English ECO Mode Choose On to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose Off to return normal mode. High Altitutde Choose On to turn on High Altitude mode. Operate the fans at full
  • Acer X1120H | User Manual - Page 41
    32 3D English English 3D Choose On to enable the 3D functions supported by TI DLP 3D technology. Choose this item when using DLP 3D glasses, a quad buffer (NVIDIA or ATI) graphics card and HQFS format file or DVD with corresponding SW player. Choose Off to turn off 3D mode. 3D Sync Invert
  • Acer X1120H | User Manual - Page 42
    33 Language English English Language Choose the language for your OSD menu. Use the or key to select your preferred language. Press to confirm the selection.
  • Acer X1120H | User Manual - Page 43
    English English 34 3D projection The Acer projector you have bought has integrated DLP 3D technology. Important: When you turn the 3D technology on, you will be shown a reminder that 3D is enabled. If you do not wish to view 3D content, you should turn it off, otherwise the image may not be
  • Acer X1120H | User Manual - Page 44
    English English 35 3 Set 3D to On. 4 Alternatively, press on your projector's remote control to open Acer e3D Management. From the 3D options, select On. 5 If you find that the 3D content is not displaying properly, try selecting 3D Sync Invert from the projector OSD or Acer e3D Management.
  • Acer X1120H | User Manual - Page 45
    , you may need to disable the Stereoscopic feature to use the DLP 3D technology. Using the stereoscopic player You need to have a stereoscopic player in order to view 3D content. The instructions below explain how to view 3D content using the stereoscopic player that is available at www.3dtv.at
  • Acer X1120H | User Manual - Page 46
    with your glasses for instructions how to turn them on and how to change the battery. Watching 3D DVD content If you have a DVD player that supports 3D playback, you can watch 3D DVD contant using your Acer 3D-enabled projector. Connect your DVD player to the projector using any of the available
  • Acer X1120H | User Manual - Page 47
    38 4 If you find that the 3D content is not displaying properly, try selecting 3D Sync Invert from the projector OSD or Acer e3D Management. English English
  • Acer X1120H | User Manual - Page 48
    39 Appendices English English Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image problems and solutions # Problem Solution 1 No image appears •
  • Acer X1120H | User Manual - Page 49
    Image is reversed • Select Image > Projection on the OSD and adjust the projection direction. Problems with the projector # Condition Solution 1 The projector stops responding If possible, turn off the projector, then unplug to all controls the power cord and wait at least 30 seconds before
  • Acer X1120H | User Manual - Page 50
    life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, please refer to "Replacing the lamp" on page 44. OSD messages # Condition 1 Message Message Fan Fail - the system fan is not
  • Acer X1120H | User Manual - Page 51
    operation mode Flashing for 30 seconds after power on then steady blue Download mode V Normal cooling mode V Lamp events Lamp ignition fail V End of lamp lifetime V Thermal events Temperature error V Fan error V Color wheel or DMD V error Temp LED Blue --- Flashing V --- Flashing
  • Acer X1120H | User Manual - Page 52
    and cleaning the dust filter 1 Turn the projector off then unplug the power cord. 2 Pull the dust filter out (Illustration #1). 3 Clean or replace the dust filter. 4 To put the is broken, please contact your local dealer or service center to obtain a new filter. 2 Dust Filter (Illustration #2)
  • Acer X1120H | User Manual - Page 53
    as soon as possible. Make sure the projector has cooled down for at least 45 minutes before changing the lamp. Warning! Do not attempt to replace the lamp yourself. Contact the qualified service personnel for replacement. Warning! The lamp compartment is hot! Allow it to cool down before changing
  • Acer X1120H | User Manual - Page 54
    8.4 mm English English 45 Ceiling mount installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. 20mm mm13 m4m9.9 130 mm Note: Screws are not
  • Acer X1120H | User Manual - Page 55
    English English 46 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Screw Type B Large Washer Projector Bracket Supports projector and allows - for adjustments Spacer - For heat dissipation Note: It is
  • Acer X1120H | User Manual - Page 56
    type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models X1120H/ X1220H/ X1320WH Screw Type B Diameter (mm) 4 Length (mm) 8 Washer Type Large V Small V SCREW SPEC. M4 x 8 mm 193.6 mm 139.0 mm 210.6 mm
  • Acer X1120H | User Manual - Page 57
    notice. For final specs, please refer to Acer's published marketing specifications. manual zoom lens X1120H/X1220H: 27" - 250" X1320WH: 30" - 315" X1120H/X1220H: 1.2 m - 10 m X1320WH: 1.2 m - 10 m X1120H/X1220H: 1.97 - 2.17 X1320WH: 1.47 - 1.83 30k - 100 kHz 50 - 120 Hz 180 W user-replaceable lamp
  • Acer X1120H | User Manual - Page 58
    49 English English Standard package contents • Power cord • VGA cable • Remote control • Batteries (for remote control) • User's Manual CD • Quick Start Guide • Carrying case • Screw pack • Dust filter (optional) * Design and specifications are subject to change without notice.
  • Acer X1120H | User Manual - Page 59
    50 English English Compatibility modes A. VGA analog 1 VGA analog - PC signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 i Mac DV (G3) Resolution 640 x 480 640 x 480 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x
  • Acer X1120H | User Manual - Page 60
    51 English English 2 VGA analog - Extended wide timing Modes WXGA Resolution 1280 x 768 1280 x 768 1280 x 768 1280 x 720 1280 x 720 1280 x 720 1280 x 800 1280 x 800 1440 x 900 1680 x 1050 1366 x 768 1920 x 1080-RB 1024 x 600 V. Frequency [Hz] 60 75 85 60 75 85 60 75 60 60 60 60 60 H.
  • Acer X1120H | User Manual - Page 61
    52 English English XGA SXGA QuadVGA SXGA+ UXGA 800 x 600 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1152 x
  • Acer X1120H | User Manual - Page 62
    53 English English 3 HDMI - Video signal Modes Resolution 480i 720 x 480 480p 720 x 480 576i 720 x 576 576p 720 x 576 720p 1280 x 720 720p 1280 x 720 1080i 1920 x 1080 1080i 1920 x 1080 1080p 1920 x 1080 1080p 1920 x 1080 Horizontal scan rate: Vertical scan rate: V.
  • Acer X1120H | User Manual - Page 63
    installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation
  • Acer X1120H | User Manual - Page 64
    du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors
  • Acer X1120H | User Manual - Page 65
    , 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.it Hereby declare that: Trade Name: Model Number: Machine Type: Product: Projector Acer FSV1101/FNX1102/FWX1103 X1120H/X1220H/X1320WH/ D401D/D411D/D421D/EV-S32H/ EV-X32H/EV-W32H series Is compliant with the essential
  • Acer X1120H | User Manual - Page 66
    Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan The standards listed below are applied EN300 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2011. Easy Lai /Manager Regulation Center, Acer Inc. Jun. 30, 2011 Date
  • Acer X1120H | User Manual - Page 67
    / Importer is responsible for this declaration: Product: DLP Projector Model Number: FSV1101/FNX1102/FWX1103 Machine Type: X1120H/X1220H/X1320WH/ D401D/D411D/D421D/EV-S32H/ EV-X32H/EV-W32H series Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67

Acer Projector
X1120H/X1220H/X1320WH Series
User's Manual