Acer X1161P User Manual
Acer X1161P Manual
 |
UPC - 884483891900
View all Acer X1161P manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer X1161P manual content summary:
- Acer X1161P | User Manual - Page 1
Acer Projector X1161P/X1161PA/X110P/H110P/ X1161N/X1261P Series User's Guide - Acer X1161P | User Manual - Page 2
All Rights Reserved. Acer Projector X1161P/X1161PA/X110P/H110P/X1161N/X1261P Series User's Guide Original Issue: manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically - Acer X1161P | User Manual - Page 3
instructions connecting and disconnecting power to the external power supply unit: • Install the power supply unit before connecting the power cord to the AC power outlet. • Unplug the power cord before removing the power supply unit from the projector -out parts that could result in a fire or - Acer X1161P | User Manual - Page 4
lamp. Using electrical power • This product should be operated from the type of power indicated circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. • power supply cord set. If you need to replace the power cord set, make sure that the new power - Acer X1161P | User Manual - Page 5
change in performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often - Acer X1161P | User Manual - Page 6
To temporarily turn off the lamp, press HIDE on the remote control. • The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. • Do not operate lamps beyond the rated lamp life. It could cause it to - Acer X1161P | User Manual - Page 7
people speaking near you. Disposal instructions Do not throw this electronic device into the acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp - Acer X1161P | User Manual - Page 8
in this user's guide to maximize the life of your unit. Warning: • Do not look into the projector's lens when the lamp is on. replacing the lamp module. • When switching the projector off, please ensure the projector completes its cooling cycle before disconnecting power. • Turn on the projector - Acer X1161P | User Manual - Page 9
1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Remote Control and Control Panel Layout 5 Getting Started 7 Connecting the Projector 7 Turning the Projector On/Off 8 Turning on the Projector 8 Turning the projector off 9 Adjusting the Projected - Acer X1161P | User Manual - Page 10
LED & Alarm Definition Listing 30 Replacing and cleaning the dust filters 31 Replacing the Lamp 32 Ceiling Mount Installation 33 Specifications 36 Compatibility modes 38 Regulations and safety notices 40 - Acer X1161P | User Manual - Page 11
contrast ratio • Versatile display modes (Standard, Video, Bright, Picture, Game, Education, Presentation, User) for optimum performance in any situation • NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported • Lower power consumption and economy (ECO) mode extends lamp life • Acer - Acer X1161P | User Manual - Page 12
immediately if any thing is missing. Projector with lens cap Power cord XXXXXX 3V Composite video cable (X1161P/X1261P series) Battery User's guide Remote control VGA cable Security card Acer Projector Quick Start Guide Quick start guide Carrying case (Optional) Dust filters (Optional - Acer X1161P | User Manual - Page 13
English Projector Overview Projector Outlook Front / upper side 1 2 3 4 5 6 3 7 8 3 9 1 10 # Description 1 Ventilation (inlet) 2 Ventilation (outlet) 3 Remote control receivers 4 Focus ring 5 Zoom lens Rear side 7* 10 # Description 6 Lens cap 7 Power button 8 Remote control 9 Zoom - Acer X1161P | User Manual - Page 14
PC analog signal/HDTV/component video input connector (VGA IN 1 or VGA IN) 10 USB connector 4 S-Video input connector X1161P/X1161PA/X110P/H110P only: 5 Composite video input connector 1 Power socket 6* PC analog signal/HDTV/component video input connector (VGA IN 2) 2 KensingtonTM lock port - Acer X1161P | User Manual - Page 15
To choose the desired aspect ratio (Auto/4:3/16:9). 6 RESYNC Automatically synchronizes the projector to the input source. 7 FREEZE To pause the screen image. 8 KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). 9 Four directional Use - Acer X1161P | User Manual - Page 16
connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. Press "VIDEO" to change source to composite video. Press "S-VIDEO" to change source to S-Video. Note: Remote Control Placement Please refer to the illustration to attach the remote control to the projector - Acer X1161P | User Manual - Page 17
Connecting the Projector RS232 VGA RS232 USB USB D-Sub 4 8 8 D-Sub USB USB 2 4 2 6 D-Sub D-Sub X1161 series Y 1 3 5 7 RW S-Video output Y Video output # Description X1161N series: 1 Power cord 2 VGA cable 8 USB cable X1161P/X1161PA/X110P/H110P series: 1 Power - Acer X1161P | User Manual - Page 18
projector is locked onto a specific source type and there is no such type of input signal detected. • If the screen displays "No Signal", please make sure the signal cables are securely connected. • If you connect to multiple sources at the same time, use the "Source" button on the remote control - Acer X1161P | User Manual - Page 19
indicator will turn solid red. Contact your local dealer or service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator - Acer X1161P | User Manual - Page 20
English 10 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: 1 Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle. 1 Tilt adjusting wheel - Acer X1161P | User Manual - Page 21
size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 69" and 76". Note: Remind as below - Acer X1161P | User Manual - Page 22
12 English Screen size Top Screen size Top Desired Distance (m) Diagonal (inch) (Min zoom) W (cm) x 103 x 77 88 2.5 57 116 x 87 100 63 128 x 96 111 3 69 140 x 105 120 76 154 x 115 133 3.5 80 163 x 122 140 88 179 x 135 155 4 92 186 x 531 Zoom Ratio: 1.1x - Acer X1161P | User Manual - Page 23
how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50" set the projector at a distance 2 m and 2.2 m from the screen and adjust the zoom level accordingly. - Acer X1161P | User Manual - Page 24
14 English Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1x W (cm) x H (cm) 61 x 46 81 x 61 102 x 76 122 x 91 142 x 107 163 x 122 183 x 137 203 x 152 244 x 183 305 x 229 366 x 274 - Acer X1161P | User Manual - Page 25
the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 Turn on the projector by pressing "Power" button on the control pad. 2 Press the "MENU" button on the - Acer X1161P | User Manual - Page 26
the reminding function for presentation time control. Please refer to Onscreen Display Menus section for more detail. Acer ePower Management Press " " to launch "Acer ePower Management". "Acer ePower Management" provides user one shortcut to save lamp and projector life. Please refer to Onscreen - Acer X1161P | User Manual - Page 27
in the submenu and adjust as described above. • Press "MENU" on the remote control, the screen will return to the main menu. • To exit OSD, press "MENU" on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Sub menu - Acer X1161P | User Manual - Page 28
to lighten the image. "Contrast" controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount screen looks colder; at lower color temperatures, the screen looks warmer. Effects the representation of dark scenery. With greater gamma value - Acer X1161P | User Manual - Page 29
red in the image. Note: "Saturation" and "Tint" functions are not supported under computer mode or DVI mode. Image Projection mode • Front: The factory Reverses the image so you can project from behind a translucent screen. Auto: Automatically adjusts projection location of image. • Desktop - Acer X1161P | User Manual - Page 30
• Press to increase the sharpness. 3D 3D Sync Invert Choose "NVIDIA 3D Vision" or "DLP 3D" to enable 3D function supported by NVIDIA or TI DLP 3D technology. • NVIDIA 3D Vision: This is only supported on X1261P. Choose this item while using NVIDIA 3D glasses, IR emitter, NVIDIA graphic card and - Acer X1161P | User Manual - Page 31
in X1161PA/ X110P/H110P/X1161N. Note: 3D function is supported by VGA source only. Please see timing table for detail 3D timings. Note: While using NVIDIA 3D Vision, please download and install latest NVIDIA 3D VISION driver from NVIDIA web site for your graphic card to support this projector - Acer X1161P | User Manual - Page 32
the menu location on the display screen. Selects a preferred closed captioning only available when a composite video or S-Video input signal is selected and its system format is 990 minutes. • When the time is up, the projector will prompt the user to enter the password again. • The factory default - Acer X1161P | User Manual - Page 33
please contact with an Acer service center. Disable Power button • When "ON" is selected, only the Power Key on the remote control can be used. If "OFF" is selected, then the Power Key on either the remote control or the control panel can be used to control the projector. • Default is "Off". Choose - Acer X1161P | User Manual - Page 34
High Altitutde Auto Shutdown Lamp Hour Elapse Lamp Reminding Lamp Hour Reset Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Choose "On" to turn on High Altitude mode. Operate the fans at full speed - Acer X1161P | User Manual - Page 35
Location Timer Start Timer Period Timer Display • Choose the location of the timer on the screen. • Press to start or stop the timer. • Press or to adjust the timer period. • Press or screen. to which timer mode to display on the Language Language Choose the multilingual OSD menu. Use - Acer X1161P | User Manual - Page 36
English Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears • Connected as - Acer X1161P | User Manual - Page 37
Press "RESYNC" on the remote control. or incorrectly displayed image freezes, restart all equipment including the projector. 4 The screen of the • If you are screens when a second display device is in use. presentation Each has a different way to be reactivated. Refer to your computer's manual - Acer X1161P | User Manual - Page 38
• Adjust the zoom lever on the front of the projector. Move the projector closer to or further from the screen. Press "MENU" on the remote control. Go to "Image --> Aspect Ratio" and try different settings or press"Aspect Ratio" on the remote control to adjust directly. If possible, reposition the - Acer X1161P | User Manual - Page 39
OSD Messages # Condition 1 Message Message Reminder Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum - Acer X1161P | User Manual - Page 40
-- Power button OFF: V -- Cooling completed; Standby Mode Error (Thermal Failure) Quick Flashing RED and Steady BLUE by returns Error (Fan lock) Quick Flashing RED and Steady BLUE by returns Error (Lamp breakdown) Quick Flashing BLUE and Steady RED by returns Error (Color Wheel fail - Acer X1161P | User Manual - Page 41
the dust filters Replacing the dust filters 1 Turn the projector off then unplug the power cord. 2 Pull the both sides dust filters out. (Illustration #1) 3 Clean or replace the dust is broken, please contact your local dealer or service center to obtain a new filter. Dust Filter (Illustration #2) - Acer X1161P | User Manual - Page 42
(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the - Acer X1161P | User Manual - Page 43
English 33 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. 20mm mm13 m4m9.9 8.4 mm 130 mm Note: Screws are not included. - Acer X1161P | User Manual - Page 44
Spacer - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod. Screw Type A 50 mm length 08 - Acer X1161P | User Manual - Page 45
and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models X1161P/X1161PA/ X110P/H110P/ X1161N/X1261P Screw Type B Diameter (mm) Length (mm) 3 25 Washer Type Large Small V V SCREW SPEC. M3 x 25 mm 82.30 mm 95.00 mm 15.00 mm - Acer X1161P | User Manual - Page 46
Projection screen size (diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Lamp type Keystone correction Audio Weight Dimensions (W x D x H) Digital Zoom Power supply Power consumption Operating temperature DLP® X1161P/X1161PA/X110P/H110P/X1161N: Native: SVGA - Acer X1161P | User Manual - Page 47
mm audio jack input x1 • AC power cord x1 • VGA cable x1 • Composite video cable x1 (X1161P/X1261P series) • Remote control x1 • Battery x1 (for remote control) • User's guide (CD-ROM) x1 • Quick start guide x1 • Security card x1 • Carrying case x1 (Optional) * Design and specifications are subject - Acer X1161P | User Manual - Page 48
38 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 - Acer X1161P | User Manual - Page 49
31.25 60 45.00 50 37.50 60(30) 33.75 50(25) 33.75 60 67.50 50 56.26 30k-100kHz 50-120 Hz - Acer X1161P | User Manual - Page 50
Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two - Acer X1161P | User Manual - Page 51
of Conformity for EU countries Acer hereby declares that this projector series is in compliance with LAN and/or Bluetooth modules). Canada - Low-power license-exempt radio communication devices (RSS-210) To prevent radio interference to the licensed service, this device is intended to be operated - Acer X1161P | User Manual - Page 52
02 9399-2913, www.acer.it Hereby declare that: Product: Projector Trade Name: Model Number: Machine Type: Acer DSV0008/DNX0009 X1161P/X1161PA/X110P/H110P/X1161N/ X1261P Electrical and Electronic Equipment -. The maximum concentration values of the restricted substances by weight in homogenous - Acer X1161P | User Manual - Page 53
Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan The standards listed below are applied EN300 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2009. Easy Lai /Manager Regulation Center, Acer Inc. Nov. 3, 2010 Date - Acer X1161P | User Manual - Page 54
Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation DLP Projector Model Number: DSV0008/DNX0009 Machine Type: X1161P/X1161PA/X110P/H110P/X1161N/ X1261P series Name of Responsible Party: Acer
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
 |
 |
Acer Projector
X1161P/X1161PA/X110P/H110P/
X1161N/X1261P Series
User's Guide