Acer X1161PA User Manual
Acer X1161PA Manual
View all Acer X1161PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer X1161PA manual content summary:
- Acer X1161PA | User Manual - Page 1
Acer Projector X1161P/X1161PA/X110P/H110P/ X1161N/X1261P Series User's Guide - Acer X1161PA | User Manual - Page 2
All Rights Reserved. Acer Projector X1161P/X1161PA/X110P/H110P/X1161N/X1261P Series User's Guide Original Issue: manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically - Acer X1161PA | User Manual - Page 3
document for future reference. Follow all warnings and instructions marked on the product. Turning the product off power outlet. • Unplug the power cord before removing the power supply unit from the projector. • If the system has multiple sources of power, disconnect power from the system by - Acer X1161PA | User Manual - Page 4
unexpected short current or damage rotor devices, lamp. Using electrical power • This product should the load should not exceed 80% of the power strip's input rating. • This product's AC adapter is equipped with a power supply cord set. If you need to replace the power cord set, make sure that the - Acer X1161PA | User Manual - Page 5
performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those • Do not look into the projector's lens when the lamp is on. The bright may hurt your eyes. • Turn on the projector first and then signal sources • - Acer X1161PA | User Manual - Page 6
professional service personnel. • Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer ceiling mount kit for mounting the projector and - Acer X1161PA | User Manual - Page 7
't hear people speaking near you. Disposal instructions Do not throw this electronic device into acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp - Acer X1161PA | User Manual - Page 8
all changing instructions. • This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. • Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module. • When switching the projector off - Acer X1161PA | User Manual - Page 9
1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Remote Control and Control Panel Layout 5 Getting Started 7 Connecting the Projector 7 Turning the Projector On/Off 8 Turning on the Projector 8 Turning the projector off 9 Adjusting the Projected - Acer X1161PA | User Manual - Page 10
LED & Alarm Definition Listing 30 Replacing and cleaning the dust filters 31 Replacing the Lamp 32 Ceiling Mount Installation 33 Specifications 36 Compatibility modes 38 Regulations and safety notices 40 - Acer X1161PA | User Manual - Page 11
DLP® projector. Outstanding features include: • DLP® technology • X1161P/X1161PA/X110P/H110P/X1161N series: Native 800 x 600 SVGA resolution X1261P series : Native 1024 x 768 XGA resolution 4:3 / 16:9 aspect ratio supported • Acer ColorBoost technology delivers nature's true colors for vivid, life - Acer X1161PA | User Manual - Page 12
immediately if any thing is missing. Projector with lens cap Power cord XXXXXX 3V Composite video cable (X1161P/X1261P series) Battery User's guide Remote control VGA cable Security card Acer Projector Quick Start Guide Quick start guide Carrying case (Optional) Dust filters (Optional - Acer X1161PA | User Manual - Page 13
English Projector Overview Projector Outlook Front / upper side 1 2 3 4 5 6 3 7 8 3 9 1 10 # Description 1 Ventilation (inlet) 2 Ventilation (outlet) 3 Remote control receivers 4 Focus ring 5 Zoom lens Rear side 7* 10 # Description 6 Lens cap 7 Power button 8 Remote control 9 Zoom - Acer X1161PA | User Manual - Page 14
/HDTV/component video input connector (VGA IN 2) 2 KensingtonTM lock port 7 RS232 connector 3 PC analog signal/HDTV/component video input connector 8 Monitor loop-through output connector (VGA-Out) 4 S-Video input connector 9 Audio input connector 5 Composite video input connector 10* USB - Acer X1161PA | User Manual - Page 15
13 # Icon Function Description 1 Remote control Receives signals from remote control. receiver 2 POWER Refer to the "Turning the Projector On/Off" section. 3 MENU (Auto/4:3/16:9). 6 RESYNC Automatically synchronizes the projector to the input source. 7 FREEZE To pause the screen - Acer X1161PA | User Manual - Page 16
connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. Press "VIDEO" to change source to composite video. Press "S-VIDEO" to change source to S-Video. Note: Remote Control Placement Please refer to the illustration to attach the remote control to the projector - Acer X1161PA | User Manual - Page 17
cable 5 S-Video cable 8 USB cable 4* RS232 cable # Description X1261P series: 1 Power cord 2 VGA cable 3 Composite video cable 4 RS232 cable 5 S-Video cable 6* Audio cable jack/jack 7* Audio cable jack/RCA 8* USB cable Note: To ensure the projector works well with your computer, please - Acer X1161PA | User Manual - Page 18
signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. • If the screen - Acer X1161PA | User Manual - Page 19
indicator will turn solid red. Contact your local dealer or service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator - Acer X1161PA | User Manual - Page 20
English 10 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: 1 Use Tilt adjusting wheel (Illustration #1) to fine-tune the display angle. 1 Tilt adjusting wheel - Acer X1161PA | User Manual - Page 21
to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 3 m from the screen, good image quality is possible for image sizes between 69" and 76". Note - Acer X1161PA | User Manual - Page 22
12 English Screen size Top Screen size Top Desired Distance (m) Diagonal (inch) (Min zoom) W (cm) x H (cm) From base to Diagonal top of image (inch) (cm) (Max zoom) W (cm) x H (cm) From base to top of image (cm) 1.5 34 70 x 52 60 38 77 x 58 66 2 46 - Acer X1161PA | User Manual - Page 23
how to achieve a desired image size by adjusting either the position or the zoom ring. Example: to obtain an image size of 50" set the projector at a distance 2 m and 2.2 m from the screen and adjust the zoom level accordingly. - Acer X1161PA | User Manual - Page 24
14 English Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1x W (cm) x H (cm) 61 x 46 81 x 61 102 x 76 122 x 91 142 x 107 163 x 122 183 x 137 203 x 152 244 x 183 305 x 229 366 x 274 406 x 305 508 x 381 610 x 457 Max zoom - Acer X1161PA | User Manual - Page 25
OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed control pad to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings Acer welcome screen. - Acer X1161PA | User Manual - Page 26
time control. Please refer to Onscreen Display Menus section for more detail. Acer ePower Management Press " " to launch "Acer ePower Management". "Acer ePower Management" provides user one shortcut to save lamp and projector life. Please refer to Onscreen Display section for more detail. - Acer X1161PA | User Manual - Page 27
in the submenu and adjust as described above. • Press "MENU" on the remote control, the screen will return to the main menu. • To exit OSD, press "MENU" on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Sub menu - Acer X1161PA | User Manual - Page 28
. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter. Adjusts the red color. Adjusts the green color. Adjusts the blue color. - Acer X1161PA | User Manual - Page 29
amount of red in the image. Note: "Saturation" and "Tint" functions are not supported under computer mode or DVI mode. Image Projection mode • Front: The factory default setting adjusts projection location of image. • Desktop • Ceiling: Turns the image upside down for ceiling-mounted projection. - Acer X1161PA | User Manual - Page 30
. • Press to increase the sharpness. 3D 3D Sync Invert Choose "NVIDIA 3D Vision" or "DLP 3D" to enable 3D function supported by NVIDIA or TI DLP 3D technology. • NVIDIA 3D Vision: This is only supported on X1261P. Choose this item while using NVIDIA 3D glasses, IR emitter, NVIDIA graphic card - Acer X1161PA | User Manual - Page 31
/H110P/X1161N. Note: 3D function is supported by VGA source only. Please see timing table for detail 3D timings. Note: While using NVIDIA 3D Vision, please download and install latest NVIDIA 3D VISION driver from NVIDIA web site for your graphic card to support this projector. Note: It needs - Acer X1161PA | User Manual - Page 32
. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. Denne range is from 10 minute to 990 minutes. • When the time is up, the projector will prompt the user to enter the password again. • The factory default setting of - Acer X1161PA | User Manual - Page 33
password: • An unique 6-digit "Universal Password" which is printed projector anytime no matter what the Administrator Password is. • If losing this security card and number, please contact with an Acer service supported in X1161N. Note: "VGA OUT (Standby)" function is supported in X1261P. - Acer X1161PA | User Manual - Page 34
extend the lamp life and reduce noise. Choose "Off" to return normal mode. Choose "On" to turn on High Altitude mode. Operate the fans at full speed continuously to allow for proper high altitude cooling of the projector. The projector will automatically shutdown when there is no signal input after - Acer X1161PA | User Manual - Page 35
English 25 Timer Timer Location Timer Start Timer Period Timer Display • Choose the location of the timer on the screen. • Press to start or stop the timer. • Press or to adjust the timer period. • Press or screen. to which timer mode to display on the Language Language Choose the - Acer X1161PA | User Manual - Page 36
26 Appendices English Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears • - Acer X1161PA | User Manual - Page 37
" on the remote control. or resolutions or your monitor freezes, restart all equipment including the projector. 4 The screen be reactivated. Refer to your computer's manual for detailed information. • If you to correct it. Refer to the or flickering "Image" section for more information. • - Acer X1161PA | User Manual - Page 38
out or makes a popping sound When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section. - Acer X1161PA | User Manual - Page 39
OSD Messages # Condition 1 Message Message Reminder Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum - Acer X1161PA | User Manual - Page 40
; Standby Mode Error (Thermal Failure) Quick Flashing RED and Steady BLUE by returns Error (Fan lock) Quick Flashing RED and Steady BLUE by returns Error (Lamp breakdown) Quick Flashing BLUE and Steady RED by returns Error (Color Wheel fail) Quick Flashing BLUE and Steady RED by returns - Acer X1161PA | User Manual - Page 41
the dust filters Replacing the dust filters 1 Turn the projector off then unplug the power cord. 2 Pull the both sides dust filters out. (Illustration #1) 3 Clean or replace the dust is broken, please contact your local dealer or service center to obtain a new filter. Dust Filter (Illustration #2) - Acer X1161PA | User Manual - Page 42
(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the - Acer X1161PA | User Manual - Page 43
If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. 20mm mm13 m4m9.9 8.4 mm 130 mm Note: Screws are not included. Please obtain the appropriate - Acer X1161PA | User Manual - Page 44
English 34 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Screw Type B Large Washer Projector Bracket Supports projector and allows - for adjustments Spacer - For heat dissipation Note: It is recommended that - Acer X1161PA | User Manual - Page 45
washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models X1161P/X1161PA/ X110P/H110P/ X1161N/X1261P Screw Type B Diameter (mm) Length (mm) 3 25 Washer Type Large Small V V SCREW SPEC. M3 x 25 mm 82.30 mm 95.00 mm 15.00 mm - Acer X1161PA | User Manual - Page 46
rate Lamp type Keystone correction Audio Weight Dimensions (W x D x H) Digital Zoom Power supply Power consumption Operating temperature DLP® X1161P/X1161PA/X110P/H110P/X1161N: Native: SVGA (800 x 600) , Maximum: UXGA (1600 x 1200), WSXGA+ (1680x1050), 1080p(1920x1080) X1261P: Native: XGA (1024 - Acer X1161PA | User Manual - Page 47
mm audio jack input x1 • AC power cord x1 • VGA cable x1 • Composite video cable x1 (X1161P/X1261P series) • Remote control x1 • Battery x1 (for remote control) • User's guide (CD-ROM) x1 • Quick start guide x1 • Security card x1 • Carrying case x1 (Optional) * Design and specifications are subject - Acer X1161PA | User Manual - Page 48
38 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 - Acer X1161PA | User Manual - Page 49
39 English 2 VGA Analog - Extended Wide Timing Modes WXGA Resolution 1280x768 1280x768 1280x768 1280x720 1280x800 1440x900 1680x1050 1366x768 1920x1080-RB 1024x600 V.Frequency [Hz] 60 75 85 60 60 60 60 60 60 60 H.Frequency [KHz] 47.78 60.29 68.63 44.80 49.60 55.90 65.30 47.71 66.60 37.30 3 - Acer X1161PA | User Manual - Page 50
comply with the limits for a Class B digital device pursuant to Part 15 of the FCC installed and used in accordance with the instructions, may cause harmful interference to radio regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified - Acer X1161PA | User Manual - Page 51
du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors - Acer X1161PA | User Manual - Page 52
, www.acer.it Hereby declare that: Product: Projector Trade Name: Model Number: Machine Type: Acer DSV0008/DNX0009 X1161P/X1161PA/X110P/H110P/X1161N/ X1261P series Is Electrical and Electronic Equipment -. The maximum concentration values of the restricted substances by weight in homogenous - Acer X1161PA | User Manual - Page 53
Acer Incorporated 8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih Taipei Hsien 221, Taiwan The standards listed below are applied EN300 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2009. Easy Lai /Manager Regulation Center, Acer Inc. Nov. 3, 2010 Date - Acer X1161PA | User Manual - Page 54
local Manufacturer / Importer is responsible for this declaration: Product: DLP Projector Model Number: DSV0008/DNX0009 Machine Type: X1161P/X1161PA/X110P/H110P/X1161N/ X1261P series Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San Carlos St
Acer Projector
X1161P/X1161PA/X110P/H110P/
X1161N/X1261P Series
User's Guide