Acer X123PH User Manual

Acer X123PH Manual

Get Acer X123PH PDF manuals and user guides View all Acer X123PH manuals
Add to My Manuals
Save this manual to your list of manuals

Acer X123PH manual content summary:

  • Acer X123PH | User Manual - Page 1
    Acer Projector P1183/M403/PE-S42 X1183A/D603P/EV-S62T/X114 X1183/D603/EV-S62 X113/D600/EV-S60/V10S/AS201 X113H/X113PH/D600D/EV- M420/PE-W40/V11W/AW216 H5380BD/E230/HE-720 P1510/P1515/M450/PE-840 H6520BD/E240D/HE-804J X133PWH/D620D/EV-W60H/V13W/AW313 X123PH/D610D/EV-X60H/V13X/AX313 Series User's Guide
  • Acer X123PH | User Manual - Page 2
    . Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 08/2014 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual
  • Acer X123PH | User Manual - Page 3
    document for future reference. Follow all warnings and instructions marked on the product. Turning the product off power outlet. • Unplug the power cord before removing the power supply unit from the projector. • If the system has multiple sources of power, disconnect power from the system by
  • Acer X123PH | User Manual - Page 4
    surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure
  • Acer X123PH | User Manual - Page 5
    performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those • Do not look into the projector's lens when the lamp is on. The bright may hurt your eyes. • Turn on the projector first and then signal sources •
  • Acer X123PH | User Manual - Page 6
    and follow all changing instructions. • Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module. • Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the
  • Acer X123PH | User Manual - Page 7
    't hear people speaking near you. Disposal instructions Do not throw this electronic device into acer-group.com/public/Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp
  • Acer X123PH | User Manual - Page 8
    . • Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning: • Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. • To reduce the risk of fire or
  • Acer X123PH | User Manual - Page 9
    9 Connecting the Projector 9 Turning the Projector On/Off 11 Turning on the Projector 11 Turning the projector off 12 Adjusting User Controls 22 Installation menu 22 Onscreen Display (OSD) Menus 24 Color 25 Image 27 Setting 29 Management 32 Audio 33 3D 34 Language 34 Acer
  • Acer X123PH | User Manual - Page 10
    Panel 36 Network Setting 37 Alert Setting 37 Logout 38 Appendices 39 Troubleshooting 39 LED & Alarm Definition Listing 43 Cleaning and replacing the dust filters 44 Replacing the Lamp 45 Ceiling Mount Installation 46 Specifications 49 Compatibility modes 53 Regulations and
  • Acer X123PH | User Manual - Page 11
    D613/EV-X62/X123PH/D610D/EV-X60H/V13X/AX313 series: Native 1024 x 768 XGA resolution P1383W/X1383WH/M423 User) enable optimum performance in any situation • NTSC / PAL / SECAM compatible and HDTV (720p, 1080i, 1080p) supported • Lower power consumption and economy (ECO) mode extends lamp life • Acer
  • Acer X123PH | User Manual - Page 12
    the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. English Projector Power cord VGA cable 2 x Batteries (option) Security card User's guide Quick start guide Carrying case (option) Dust filters (option) Remote control
  • Acer X123PH | User Manual - Page 13
    English 3 Projector Overview Projector Outlook Front / upper side 32 5 6 4 1 7 # Description 1 Remote control receiver 2 Power button 3 Control panel 4 Lamp cover 8 # Description 5 Zoom lever 6 Focus ring 7 Projection lens 8 Tilt adjusting wheels
  • Acer X123PH | User Manual - Page 14
    English 4 Right / Rear side 12 3 4 5 6 7 8 9 10 11 12 13 14 2 12 2 4 1 4 1 16 15 15 7 10 11 11 # Description # Description 1 Composite video input connector 9 LAN (RJ45 Port for 10/100M Ethernet) 2 S-Video input connector 10 RS232 connector 3
  • Acer X123PH | User Manual - Page 15
    input source. Changes the active source. See the contents in "Turning the Projector On/Off" section. 7 Mode 8 MENU Press "Mode" to select the display mode from Bright, Presentation, Standard, Video, Game, Education and User. • Press "MENU" to launch the Onscreen display (OSD) menu, back to the
  • Acer X123PH | User Manual - Page 16
    . Refer to the "Turning the Projector On/Off" section. 3 3D Press "3D" to select 3D models. 4 SOURCE Changes the active source. 5 MODE Press "MODE" to select the display mode from Bright, Presentation, Standard, Video, Game, Education and User. 6 HIDE Momentarily turns off the video
  • Acer X123PH | User Manual - Page 17
    VIDEO. Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and which is wire or wirelessly transmitted from the PC to the projector via the "Acer LAN webpage management" utility. Aim the remote at the viewing screen
  • Acer X123PH | User Manual - Page 18
    English 8 MHL (Mobile High-Definition Link) Control 1 MEDIA SOURCE 2 SETUP MODE HIDE ZOOM 3 4 FREEZE 5 6 8 7 # Icon Component Description 1 MODE • Press "MODE" button for one second to activate the MHL Control Mode. • To exit, press the "MODE" button again. 2 SOURCE Press the
  • Acer X123PH | User Manual - Page 19
    9 Getting Started English Y RBG Connecting the Projector S-Video output DVD player, Set-top Box, HDTV receiever WR 8 6 Video output WR Y D-Sub 5 D-Sub 2 R BG 2 4 11 12 D-Sub D-Sub HDTV adapter HDMI HDMI
  • Acer X123PH | User Manual - Page 20
    works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Functions vary depending on model definition. Note: USB cable needs powered extender if the length is over 5 m. Note: VGA OUT loops through for VGA
  • Acer X123PH | User Manual - Page 21
    1 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 2 Turn on the projector by pressing "Power" button on the control panel or remote control, and the Power indicator LED will turn blue. 3 Turn on your source (computer, notebook,
  • Acer X123PH | User Manual - Page 22
    to turn the projector immediately back on anytime during the 2minute shutdown process. (only supported under "Instant service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector
  • Acer X123PH | User Manual - Page 23
    English 13 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel
  • Acer X123PH | User Manual - Page 24
    image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • SVGA/XGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 46" and 50". Note
  • Acer X123PH | User Manual - Page 25
    15 • WXGA series If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 55" and 60". English Note: Remind as below figure, the space of
  • Acer X123PH | User Manual - Page 26
    16 • 720p series If the projector is 3 m from the screen, good image quality is possible for image sizes between 80" and 87". English Note: Remind as below figure, the space of
  • Acer X123PH | User Manual - Page 27
    17 • 1080p series If the projector is 3 m from the screen, good image quality is possible for image sizes between 84" and 92". English Note: Remind as below figure, the space of
  • Acer X123PH | User Manual - Page 28
    zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. • SVGA/XGA series To obtain an image size of 50" set the projector at a distance 2.0 m and 2.2 m from the screen. A 50" Desired image size D Height: 88 cm from base to top of image
  • Acer X123PH | User Manual - Page 29
    19 • WXGA series To obtain an image size of 60" set the projector at a distance 2.0 m and 2.2 m from the screen. English A 60" Desired image size D Height: 91 cm from base to top of image 2.2 m C 2.0 m B Desired Distance Desired Image Size
  • Acer X123PH | User Manual - Page 30
    20 • 720p series To obtain an image size of 60" set the projector at a distance 2.06 m and 2.26 m from the screen. English A 60" Desired image size D Height: 89 cm from base to top of image 2.26 m C 2.06 m B Desired
  • Acer X123PH | User Manual - Page 31
    21 • 1080p series To obtain an image size of 50" set the projector at a distance 1.6 m and 1.8 m from the screen. English A 50" Desired image size D Height: 72 cm from base to top of image 1.8 m C 1.6 m B Desired Distance Desired Image Size
  • Acer X123PH | User Manual - Page 32
    button on the control pad. 2 Press the "MENU" button on the remote control to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more . 4 The Installation
  • Acer X123PH | User Manual - Page 33
    setting. The new settings will be saved automatically upon exiting the menu. 5 Push the MENU button anytime to exit the menu and return to the Acer welcome screen. Note: Functions vary depending on model definition.
  • Acer X123PH | User Manual - Page 34
    will return to the main menu. • To exit OSD, press "MENU" on the remote control or control panel. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Sub menu Note: Some of the following OSD settings may not be available. Please refer to
  • Acer X123PH | User Manual - Page 35
    • Movie: For brighter and general movie/video/photo playing. • Dark Cinema: For dark movie content. • Sports: For sport picture. • User: Memorize user's settings. Use this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue
  • Acer X123PH | User Manual - Page 36
    Gamma Advanced Mode Use this function to choose CT1, CT2 (Native), CT3, User mode. R Gain Adjusts the red gain for color temperature optimization. G Gain Note: "Saturation" and "Tint" functions are not supported under computer or HDMI mode. Note: Functions vary depending on model definition.
  • Acer X123PH | User Manual - Page 37
    Mode • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. Front: The factory default adjusts projection location of image. • Desktop Aspect Ratio Auto Keystone Manual Keystone • Ceiling: Turns the image upside down for ceiling-mounted
  • Acer X123PH | User Manual - Page 38
    the necessary adjustments. Tracking Synchronizes the signal timing of the projector with the graphics card. If you experience an unstable or : "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI or Video mode. Note: "HDMI Color Range" and "HDMI
  • Acer X123PH | User Manual - Page 39
    default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice: Before proceeding with the following
  • Acer X123PH | User Manual - Page 40
    accepted by projector anytime no matter what the Administrator Password is. • If losing this security card and number, please contact with an Acer service center. Lock to user startup screen Default Lock User Startup Screen is "Off". If lock user startup screen is "On", users cannot change startup
  • Acer X123PH | User Manual - Page 41
    English 31 LAN LAN Default is "Off". Choose "On" to enable LAN connection. If users want to do LAN control under standby mode, change VGA OUT (Standby) from Off to On. LAN IP/Mask Identify IP and Mask address. LAN
  • Acer X123PH | User Manual - Page 42
    English 32 Management ECO Mode High Altitude Turn Off Mode Auto Shutdown Lamp Hour Elapse Lamp Reminding Lamp Hour Reset Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and reduce noise. Choose "Off" to return normal mode. Choose "On" to turn on
  • Acer X123PH | User Manual - Page 43
    " to mute the volume. • Choose "Off" to restore the volume. Power On/Off Volume Select this function to adjust the notification volume when turning the projector on/off. Note: Functions vary depending on model definition.
  • Acer X123PH | User Manual - Page 44
    the correct image (for DLP 3D). Choose "On" to display the 3D warning message. Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download
  • Acer X123PH | User Manual - Page 45
    Open browser and enter the Server IP address by 192.168.100.10 to find below homepage of acer LAN webpage management. A password is needed to login in before using. Select a user. Administrator is with high authority that can process more operations such as network setting and alert setting. Default
  • Acer X123PH | User Manual - Page 46
    , Control Panel, Networking Setting and Alert Setting. Note: Control Panel and Networking Setting are only for Administrator account. Control Panel Enduser can control and adjust projector setting value via this page.
  • Acer X123PH | User Manual - Page 47
    Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply". Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right
  • Acer X123PH | User Manual - Page 48
    English 38 Logout After tap Logout, you will return to login page within 5 seconds. Note: Functions vary depending on model definition.
  • Acer X123PH | User Manual - Page 49
    39 Appendices English Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears •
  • Acer X123PH | User Manual - Page 50
    has a different way to be reactivated. Refer to your computer's manual for detailed information. • If you are using an Apple® the focus ring on the projector lens. • Make sure the projection screen is within the required distance of 3.9 to 39.0 feet (1.2 to 11.9 meters) (SVGA/XGA series) / 3.3 to
  • Acer X123PH | User Manual - Page 51
    you may need to adjust the following "widescreen" settings: DVD title • If you play a 4:3 format DVD title, please change the format to 4:3 in the projector OSD. • If the image is still stretched, you will also need to adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect
  • Acer X123PH | User Manual - Page 52
    the dust filter" for details. • Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon. Problems with the Projector # Condition Solution 1 The projector stops responding If possible, turn off the projector, then to all controls unplug the power cord
  • Acer X123PH | User Manual - Page 53
    100ms ---- Power off (Cooling state) -- Power button OFF -- (cooling completed; standby mode) Error (thermal failure) -- Error (fan lock) -- Error (lamp breakdown) Error (color wheel fail) ON Quick Flashing Temp_LED Red Flash ON to OFF 100ms ---- -- -- ON Quick Flashing --- Power LED
  • Acer X123PH | User Manual - Page 54
    with dust, preventing proper ventilation. This can cause overheating and damage the projector. 2 1 Follow these steps: 1 Turn the projector off. Wait for the Power LED to stop flashing then unplug the the filter is broken, please contact your local dealer or service center to obtain a new filter.
  • Acer X123PH | User Manual - Page 55
    Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!" When you see this message, change the
  • Acer X123PH | User Manual - Page 56
    English 8.4 mm 46 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base.
  • Acer X123PH | User Manual - Page 57
    - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod. Screw Type A 50 mm length/ 8 mm
  • Acer X123PH | User Manual - Page 58
    in the table below. 4 mm diameter screws are enclosed in the screw pack. Screw Type B Diameter (mm) Length (mm) 4 25 Large V Washer Type Small V SCREW SPEC. M4 x 25 mm 82.30 mm 63.81 mm 55.00 mm 85.00 mm
  • Acer X123PH | User Manual - Page 59
    specs, please refer to Acer's published marketing specifications. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors Projection lens DLP X62/X123PH/D610D/ EV-X60H/V13X/AX313 series: F = 2.41 ~ 2.55, f = 2.79~23.99 mm, 1.1x manual zoom and manual
  • Acer X123PH | User Manual - Page 60
    -S60/V10S/AS201/ X113H/X113PH/D600D/EV-S60H/V12S/AS211/P1283/ M413/PE-X42/V12X/AX316/P1283n/M413T/PE-X42G/ X1283/X1280/D613/EV-X62/X123PH/D610D/ EV-X60H/V13X/AX313 series: 3.9' (1.2 m) ~ 39.0' (11.9 m) • P1383W/X1383WH/M423/PE-W42/V12W/AW316/ P1380W/X1380WH/M420/PE-W40/V11W/AW216/ X133PWH/D620D/EV
  • Acer X123PH | User Manual - Page 61
    /X123PH/D610D/EV-X60H/V13X/AX313 series: 190 W user-replaceable lamp • P1510/P1515/M450/PE- 840/H6520BD/E240D/HE- 804J series: 240 W user-replaceable lamp Battery x2 (for remote control) (option) • User's guide (CD-ROM) x1 • Quick start guide x1 • Security card x1 • Carrying case x1 (option) English
  • Acer X123PH | User Manual - Page 62
    input X RS232 X HDMI /MHL X HDMI X Mini USB x1 (for firmware V upgrade) X113H/ X113PH/ D600D/ EV-S60H/ V12S/AS211/ X133PWH/ D620D/ EV-W60H/ V13W/ AW313/ X123PH/ D610D/ EV-X60H/ V13X/AX313 X1183A/ X1280/ D603P/ EV-S62T/ X1283/ D613/ EV-X62 P1183/M403/ PE-S42/P1283/ M413/PE-X42/ V12X/AX316
  • Acer X123PH | User Manual - Page 63
    53 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480
  • Acer X123PH | User Manual - Page 64
    English 54 2 VGA Analog - Extended Wide timing Modes WXGA WSXGA+ WUXGA Resolution 1280x768 1280x768 1280x768 1280x720 1280x720 1280x800 *1280x800-RB *1920x1200 1440x900 1680x1050 1920x1080 (1080P) 1366x768 1920x1200-RB V.Frequency [Hz] 60 75 85 60 120 60 119.909 60 60 60 60 60 59.94 H.
  • Acer X123PH | User Manual - Page 65
    85 43.3 640x480 120 61.9 SVGA 800x600 56 35.1 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 120 77.4 XGA 1024x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 99.0 SXGA 1152x864 70 63.8 1152x864 75 67
  • Acer X123PH | User Manual - Page 66
    (25) 23.97/24 60 50 59.94 H.Frequency [KHz] 15.7 15.6 31.5 31.6 45.0 37.5 33.8 28.1 27.0 67.5 56.3 74.04 4 HDMI - 1.4a 3D Timing Modes Resolution 720p (Frame Packing) 1280 x 720 720p (Frame Packing) 1280 x 720 1080p (Frame Packing ) 1920 x1080 720p (Frame Packing) 1280 x 720 720p (Frame
  • Acer X123PH | User Manual - Page 67
    English 57 1080p (Side by Side (Half)) 1920 x1080 60 Graphic source monitor range limits Horizontal scan rate: Vertical scan rate: Max. pixel rate: C. MHL Digital 67.5 15k-100kHz 24-120 Hz 165 MHz Modes VGA 480i 576i 480p 480p_2x 576p 576p_2x 720p 720p 1080i 1080i 1080p 1080p 1080p Graphic
  • Acer X123PH | User Manual - Page 68
    energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the
  • Acer X123PH | User Manual - Page 69
    du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors
  • Acer X123PH | User Manual - Page 70
    9399-2913 www.acer.it Declare under our own responsibility that the product: Product: Trade Name: Model Number: DLP Projector Acer DWX1305/DWX1304/ - 840/ H6520BD/E240D/HE-804J/X133PWH/D620D/EV-W60H/V13W/ AW313/X123PH/D610D/EV-X60H/V13X/AX313 To which this declaration refers conforms to the
  • Acer X123PH | User Manual - Page 71
    is responsible for this declaration: Product: DLP Projector Model Number: DWX1305/DWX1304/DSV1301/DNX1303/ H6520BD/E240D/HE-804J/X133PWH/ D620D/EV-W60H/V13W/AW313/X123PH/ D610D/EV-X60H/V13X/AX313 Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
Acer Projector
P1183/M403/PE-S42
X1183A/D603P/EV-S62T/X114
X1183/D603/EV-S62
X113/D600/EV-S60/V10S/AS201
X113H/X113PH/D600D/EV-S60H/V12S/AS211
P1283/M413/PE-X42/V12X/AX316
P1283n/M413T/PE-X42G
X1283/X1280/D613/EV-X62
P1383W/X1383WH/M423/PE-W42/V12W/AW316
P1380W/X1380WH/M420/PE-W40/V11W/AW216
H5380BD/E230/HE-720
P1510/P1515/M450/PE-840
H6520BD/E240D/HE-804J
X133PWH/D620D/EV-W60H/V13W/AW313
X123PH/D610D/EV-X60H/V13X/AX313 Series
User's Guide