Acer X1263N User Manual
Acer X1263N Manual
 |
View all Acer X1263N manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer X1263N manual content summary:
- Acer X1263N | User Manual - Page 1
Acer Projector X1263/X1263N/P1163/X1163/ X1163N/X113 Series User's Guide - Acer X1263N | User Manual - Page 2
Acer Incorporated. All Rights Reserved. Acer Projector X1263/X1263N/P1163/X1163/X1163N/X113 Series User's Guide manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically - Acer X1263N | User Manual - Page 3
document for future reference. Follow all warnings and instructions marked on the product. Turning the product off power outlet. • Unplug the power cord before removing the power supply unit from the projector. • If the system has multiple sources of power, disconnect power from the system by - Acer X1263N | User Manual - Page 4
iv • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical - Acer X1263N | User Manual - Page 5
performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those 50cm clearance from walls and free flow of air around the projector is necessary. • Locations where temperatures may become excessively high, such - Acer X1263N | User Manual - Page 6
down, and follow all changing instructions. • Reset the "Lamp service personnel. • Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. • This product is capable of displaying inverted images for ceiling mount installation. Only use acer - Acer X1263N | User Manual - Page 7
the volume if you can't hear people speaking near you. Disposal instructions Do not throw this electronic device into the trash when discarding. To www.acer-group.com/public/ Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or - Acer X1263N | User Manual - Page 8
maintenance as recommended in this user's guide to maximize the life of your unit. Warning: • Do not look into the projector's lens when the lamp is on. the lamp, please allow unit to cool down, and follow all changing instructions. • This product will detect the life of the lamp itself. Please be - Acer X1263N | User Manual - Page 9
8 Turning the projector off 9 Adjusting the Projected Image 10 Adjusting the Height of Projected Image 10 How to optimize image size and distance 11 How to get a preferred image size by adjusting distance and zoom 13 User Controls 15 Installation menu 15 Acer Empowering Technology - Acer X1263N | User Manual - Page 10
Troubleshooting 27 LED & Alarm Definition Listing 32 Replacing and cleaning the dust filters 33 Replacing the Lamp 34 Ceiling Mount Installation 35 Specifications 38 Compatibility modes 40 Regulations and safety notices 44 - Acer X1263N | User Manual - Page 11
This product is a single-chip DLP® projector. Outstanding features include: • DLP® technology • X1163/X1163N/X113/P1163 series: Native 800 x 600 SVGA resolution X1263/X1263N series: Native 1024 x 768 XGA resolution 4:3 / 16:9 aspect ratio supported • Acer ColorBoost technology delivers nature's true - Acer X1263N | User Manual - Page 12
dealer immediately if any thing is missing. Projector XXXXXX 3V Battery Power cord Security card VGA cable ©2013, Acer Inc. All rights reserved. X113/ X1163/ X1263/P1163 Series Acer Projector P/N:MC.JGL11.002 User's guide Remote control Quick start guide Carrying case (Optional) Dust filters - Acer X1263N | User Manual - Page 13
English 3 Projector Overview Projector Outlook Front / upper side 8 6 7 5 3 4 9 3 8 2 1 # Description 1 Zoom lens 2 Tilt adjusting wheel 3 Remote control receivers 4 Focus ring 5 IN S-VIDEO VIDEO RS232 VGA OUT AUDIO IN 10 VGA IN S-VIDEO VIDEO X1263N/X1163N VGA IN AUDIO IN - Acer X1263N | User Manual - Page 14
2 PC analog signal/HDTV/component video input connector 3 S-Video input connector 4 Composite video input connector 5 RS232 connector # Description 6 Monitor loop-through output connector (VGA-Out) 7 Audio input connector 8 Power socket 9 KensingtonTM lock port 10 USB ctrl connector Note - Acer X1263N | User Manual - Page 15
signals from remote control. receiver 2 POWER Refer to the "Turning the Projector On/Off" section. 3 MENU • Press "MENU" to launch the Onscreen VGA Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and - Acer X1263N | User Manual - Page 16
English 6 # Icon Function Description 13 Empowering Unique Acer functions: eView, eTimer, ePower Management. key 14 KEYSTONE Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). 15 Four directional Use up, down, left, right buttons to select - Acer X1263N | User Manual - Page 17
video cable 9 Audio cable jack/RCA Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Connector interface is subject to model's specifications. Note: USB cable needs powered extender if the length is - Acer X1263N | User Manual - Page 18
Power indicator LED will turn blue. 3 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. • If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input - Acer X1263N | User Manual - Page 19
the power button to turn the projector immediately back on anytime during the 2minute shutdown process. (only supported under "Instant Resume" mode) projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center. Note: Whenever the projector - Acer X1263N | User Manual - Page 20
English 10 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel - Acer X1263N | User Manual - Page 21
to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 2.0 m from the screen, good image quality is possible for image sizes between 46" and 50". Note - Acer X1263N | User Manual - Page 22
12 English Screen size Top Screen size Top Desired Distance (Min zoom) (m) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) (Max zoom) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) 1 23 47 x 35 40 25 51 x 38 44 2 46 93 x - Acer X1263N | User Manual - Page 23
to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 50" set the projector at a distance 2.0 m and 2.2 m from the screen and adjust the zoom level accordingly. - Acer X1263N | User Manual - Page 24
14 English Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1x W (cm) x H (cm) 61 x 46 81 x 61 102 x 76 122 x 91 142 x 107 163 x 122 183 x 137 203 x 152 244 x 183 305 x 229 366 x 274 406 x 305 508 x 381 610 x 457 Max zoom - Acer X1263N | User Manual - Page 25
Press the menu button on the control pad to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance button anytime to exit the menu and return to the Acer welcome screen. - Acer X1263N | User Manual - Page 26
to Onscreen Display Menus section for more detail. Acer ePower Management "Acer ePower Management" provides user one shortcut to save the projector life. Please refer to Onscreen Display section for more detail. Acer e3D Management "Acer e3D Management" provides the 3D functions. Please refer - Acer X1263N | User Manual - Page 27
English 17 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of the remote control or control panel again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Sub menu - Acer X1263N | User Manual - Page 28
18 Color English Display Mode Wall color Brightness Contrast Saturation Tint There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation. • Standard: For common environment. • Video: For playing video in a - Acer X1263N | User Manual - Page 29
for color temperature optimization. Effects the representation of dark scenery. With greater gamma value, dark scenery looks brighter. Note: "Saturation" and "Tint" functions are not supported under computer or HDMI mode. - Acer X1263N | User Manual - Page 30
20 Image English Projection Keystone (for X1163/X1163N/X1263/X1263N/X113 series only) • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select - Acer X1263N | User Manual - Page 31
Aspect Ratio Sharpeness The Manual Keystone function is unavailable under Auto "Frequency" changes the projector's refresh rate to match the frequency of your computer's graphics card. If ", "Frequency" and "Tracking" functions are not supported under HDMI or Video mode. Note: "HDMI - Acer X1263N | User Manual - Page 32
set timeout function. • Press or to select the timeout interval. • The range is from 10 minute to 990 minutes. • When the time is up, the projector will prompt the user to enter the password again. • The factory default setting of "Timeout(Min.)" is "Off". • Once the security function is enabled - Acer X1263N | User Manual - Page 33
in the box). This unique password is the number which will be accepted by projector anytime no matter what the Administrator Password is. • If losing this security card and number, please contact with an Acer service center. Default is "Off". Choose "On" to enable VGA OUT connection. (for X1263 - Acer X1263N | User Manual - Page 34
Elapse Lamp Reminding Lamp Hour Reset Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life and Mute (for X1263/X1263N/X1163N/P1163 series only) • Press to decrease the volume. • Press to increase the volume. (for X1263/X1263N/X1163N/P1163 series only - Acer X1263N | User Manual - Page 35
or overlapping image while wearing DLP 3D glasses, you may need to support 3D format files. You can download these three download/TriDef-3-D-Experience-4.0.2.html Note: "3D L/R Invert" is only available when 3D is enabled. Note: There has reminder screen if 3D still enable when power on projector - Acer X1263N | User Manual - Page 36
26 Language English Language Choose the multilingual OSD menu. Use the or key to select your preferred menu language. • Press to confirm the selection. - Acer X1263N | User Manual - Page 37
Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem "My Computer," open problem still appears, change the monitor - Acer X1263N | User Manual - Page 38
monitor freezes, restart all equipment including the projector. 4 The screen of the • If you are using a Microsoft® Windows® based notebook computer is not displaying your notebook: Some notebook computer's manual for detailed information. • If you are using an Apple® Mac® OS based notebook: - Acer X1263N | User Manual - Page 39
" and try different settings or press"Aspect Ratio" on the remote control to adjust directly. 10 Image has slanted • If possible, reposition the projector so that it is sides centered on the screen. • Press the "Keystone / " button on the remote control until the sides are vertical. • Press - Acer X1263N | User Manual - Page 40
English 30 OSD Messages # Condition 1 Message Message Reminder Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about - Acer X1263N | User Manual - Page 41
31 Problems with the Projector English # Condition Solution 1 The projector stops responding If possible, turn off the projector, then to all controls unplug the power cord and wait at least 30 seconds before reconnecting power. 2 Lamp burns out or makes a popping sound When - Acer X1263N | User Manual - Page 42
32 English LED & Alarm Definition Listing LED Messages Message Power LED Red Blue Input Power Plug Flash ON to OFF 100ms -- Standby V -- Power button ON -- V Lamp retry -- Quick Flashing Power off (Cooling state) Quick Flashing -- Power button OFF: V -- Cooling completed; - Acer X1263N | User Manual - Page 43
Replacing the dust filters 1 Turn the projector off then unplug the power cord. This can cause overheating and damage the projector. (Normally 1000 hours is recommended, clean the dust filters, use a small vacuum cleaner designed for computers and other office equipments. It also can be cleaned by - Acer X1263N | User Manual - Page 44
of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooling down for at least 30 minutes before changing the lamp. Warning: The lamp compartment is hot! Allow it to cool down before - Acer X1263N | User Manual - Page 45
English 35 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. - Acer X1263N | User Manual - Page 46
- For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod. Screw Type A 50 mm length/ 8 mm - Acer X1263N | User Manual - Page 47
type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models X1263/X1263N/ P1163/X1163/ X1163N/X113 Screw Type B Diameter (mm) Length (mm) 3 25 Washer Type Large Small V V SCREW SPEC. M3 x 25 mm 82.30 mm 95.00 - Acer X1263N | User Manual - Page 48
Acer's published marketing specifications. Projection system Resolution Computer temperature DLP® X1163 - 2.55, f = 21.79 mm - 23.99 mm, 1.1X manual zoom lens 27" (70 cm) - 300" (762 cm) 3.9' (1.2 ±40 degrees Internal speaker with 2 W output (X1263/X1263N/ X1163N/P1163) 2.2Kg (4.85 Ibs) 268 mm x - Acer X1263N | User Manual - Page 49
USB (for remote computer control) X X HDMI X V VGA IN V V S-Video V V Composite video V V RS232 V V VGA output V V 3.5 mm audio jack input V V X1163/X1163N/ X1263N/ X113 X1163N V V V V X X V V V X V X X X X X X V * Design and specifications are subject to - Acer X1263N | User Manual - Page 50
40 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA PowerBook G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1024x768 1152x864 - Acer X1263N | User Manual - Page 51
47.71 66.60 74.04 3 VGA Analog -Component Signal Modes 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p Graphic source monitor range limits Resolution V.Frequency [Hz] 720x480 720x480 59.94 (29.97) 59.94 720x576 50(25) 720x576 50 1280x720 60 1280x720 1920x1080 1920x1080 - Acer X1263N | User Manual - Page 52
42 English SVGA XGA PowerBook G4 i Mac DV (G3) 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1280x1024 1280x960 640x480 640x480 800x600 1024x768 1152x870 1280x960 1024x768 119.51 56 60 72 75 85 119.85 - Acer X1263N | User Manual - Page 53
43 English 3 HDMI - Video Signal Modes 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p 1080p Graphic source monitor range limits Resolution V.Frequency [Hz] 720x480 720x480 720x576 720x576 59.94 (29.97) 59.94 50(25) 50 1280x720 60 1280x720 50 1920x1080 60(30) - Acer X1263N | User Manual - Page 54
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is technician for help. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with - Acer X1263N | User Manual - Page 55
du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors - Acer X1263N | User Manual - Page 56
Lainate (MI) Italy Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Declare under our own responsibility that the product: Product: Projector Trade Name: Acer Model Number: DNX1132/DSV1133/DSV1134 X1263/X1263N/D113/EV-X13/P1163/D103D/ EV-S13H/X1163/X1163N/X113/D103/EV-S13 series To - Acer X1263N | User Manual - Page 57
U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of for this declaration: Product: DLP Projector Model Number: DNX1132/DSV1133/DSV1134 Machine Type: X1263/X1263N/D113/EV-X13/P1163/D103D
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
 |
 |
Acer Projector
X1263/X1263N/P1163/X1163/
X1163N/X113 Series
User's Guide