Acer X1270 User Manual

Acer X1270 Manual

Get Acer X1270 PDF manuals and user guides View all Acer X1270 manuals
Add to My Manuals
Save this manual to your list of manuals

Acer X1270 manual content summary:

  • Acer X1270 | User Manual - Page 1
    Acer Projector X1170/X111/X1170N/X1270N/ X1170A/X1270/X1270Hn Series User's Guide
  • Acer X1270 | User Manual - Page 2
    Rights Reserved. Acer Projector X1170/X111/X1170N/X1270N/X1170A/X1270/X1270Hn Series User's Guide Original Issue: manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically
  • Acer X1270 | User Manual - Page 3
    document for future reference. Follow all warnings and instructions marked on the product. Turning the product off power outlet. • Unplug the power cord before removing the power supply unit from the projector. • If the system has multiple sources of power, disconnect power from the system by
  • Acer X1270 | User Manual - Page 4
    surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure
  • Acer X1270 | User Manual - Page 5
    performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those • Do not look into the projector's lens when the lamp is on. The bright may hurt your eyes. • Turn on the projector first and then signal sources •
  • Acer X1270 | User Manual - Page 6
    and follow all changing instructions. • Reset the "Lamp Hour Reset" function from the Onscreen display "Management" menu after replacing the lamp module. • Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. The only user serviceable part is the
  • Acer X1270 | User Manual - Page 7
    hear people speaking near you. Disposal instructions Do not throw this electronic device into acer-group.com/public/ Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp
  • Acer X1270 | User Manual - Page 8
    . • Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning: • Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes. • To reduce the risk of fire or
  • Acer X1270 | User Manual - Page 9
    10 Turning the projector off 11 Adjusting the Projected Image 12 Adjusting the Height of Projected Image 12 How to optimize image size and distance 13 How to get a preferred image size by adjusting distance and zoom 15 User Controls 17 Installation menu 17 Acer Empowering Technology
  • Acer X1270 | User Manual - Page 10
    Setting 32 Alert Setting 32 Logout 33 Appendices 34 Troubleshooting 34 LED & Alarm Definition Listing 39 Cleaning and replacing the dust filters 40 Replacing the Lamp 41 Ceiling Mount Installation 43 Specifications 46 Compatibility modes 48 Regulations and safety notices 52
  • Acer X1270 | User Manual - Page 11
    product is a single-chip DLP® projector. Outstanding features include: • DLP® technology • X1170/X111/X1170N/X1170A: Native 800 x 600 SVGA resolution X1270N/X1270/X1270Hn series : Native 1024 x 768 XGA resolution 4:3 / 16:9 aspect ratio supported • Acer ColorBoost technology delivers nature's true
  • Acer X1270 | User Manual - Page 12
    thing is missing. MENU LAMP SOURC SYNC TEMP POWER Projector Acer Projector Security Card Security card Power cord VGA cable 2 x Batteries Carrying case (Option) X1170/X111/X1170A/ X1170N/X1270/ X1270N/1270Hn Series P/N:MC.JF711.002 Quick Start Guide User's Guide (CD-ROM) Remote control
  • Acer X1270 | User Manual - Page 13
    English 3 Projector Overview Projector Outlook Front / upper side 3 65 4 21 MENU LAMP SOURC SYNC TEMP POWER 7 8 # Description 1 Power 12 34 5 6 78 12 13 9 X1170A/X1270 X1170/X111 X1170N/X1270N 10 14 11 12 Note: Connector interface is subject to model's specifications.
  • Acer X1270 | User Manual - Page 14
    4 English # Description # Description 1 USB connector 8 Audio input connector 2 HDMI connector 9 LAN (RJ45 Port for 10/100M Ethernet) 3 Composite video input connector 10 PC analog signal/HDTV/component video input connector (VGA IN 2) 4 S-Video input
  • Acer X1270 | User Manual - Page 15
    6 POWER Description Power Indicator LED Lamp Indicator LED Temp Indicator LED Automatically synchronizes the projector to the input source. Changes the active source. See the contents in "Turning the Projector On/Off" section. 7 Empowering key Unique Acer functions: e3D, eView, eTimer, ePower
  • Acer X1270 | User Manual - Page 16
    to the input source. 8 MUTE To turn on/off the volume. (for X1270/X1270Hn/X1170A series only) 9 ZOOM Zooms the projector display in or out. 10 Empowering Unique Acer functions: e3D, eView, eTimer, ePower key Management. 11 MENU • Press "MENU" to launch the Onscreen display (OSD
  • Acer X1270 | User Manual - Page 17
    20 VGA Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and X1170/X111/ X1170A/X1270/X1270Hn series only) 24 SD/USB A No function. 25 USB B No function. 26 HDMI/DVI To change source to HDMI™. (no DVI
  • Acer X1270 | User Manual - Page 18
    USB RS232 8 Getting Started Connecting the Projector S-Video Output RS232 5 Video Output 4 DVD player 3 USB 2 HDMI RS232 Y D-Sub DVD player, Set-up Box, HDTV receiver D-Sub 7 6 6 D-Sub D-Sub WR 8 Y HDTV adapter 1 9 10 8 DVD player, Set-up Box, RBG HDTV receiver Internet
  • Acer X1270 | User Manual - Page 19
    English 9 Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Connector interface is subject to model's specifications.
  • Acer X1270 | User Manual - Page 20
    source automatically. • If the screen displays "Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. • If the screen on the remote control to switch between inputs. Power button MENU LAMP SOURC SYNC TEMP POWER
  • Acer X1270 | User Manual - Page 21
    to turn the projector immediately back on anytime during the 2minute shutdown process. (only supported under "Instant service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector
  • Acer X1270 | User Manual - Page 22
    English 12 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adjusting wheels for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheels to fine-tune the display angle. Tilt adjusting wheel
  • Acer X1270 | User Manual - Page 23
    Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • X1170/X111/X1170N/X1270N/X1170A/X1270/X1270Hn series Example: If the projector is 2.0 m from the screen, good image quality is possible for image sizes between
  • Acer X1270 | User Manual - Page 24
    14 English X1170/X111/X1170N/X1270N/X1170A/X1270/X1270Hn series Screen size Top Screen size Top Desired Distance (Min zoom) (m) Diagonal (inch) W (cm) x H (cm) From base to top of image (cm) (Max zoom)
  • Acer X1270 | User Manual - Page 25
    English 15 How to get a preferred image size by adjusting distance and zoom X1170/X111/X1170N/X1270N/X1170A/X1270/X1270Hn series A 50" Desired image size D Height From base to top of image 2.2 m C 2.0 m B Desired Distance The table below shows how to achieve a desired image size
  • Acer X1270 | User Manual - Page 26
    16 English X1170/X111/X1170N/X1270N/X1170A/X1270/X1270Hn series Desired Image Size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 Zoom Ratio: 1.1x W (
  • Acer X1270 | User Manual - Page 27
    Press the menu button on the control pad to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance button anytime to exit the menu and return to the Acer welcome screen.
  • Acer X1270 | User Manual - Page 28
    Display Menus section for more detail. Acer ePower Management "Acer ePower Management" provides user one shortcut to save the projector life. Please refer to Onscreen Display section for more detail. Acer e3D Management "Acer e3D Management" provides the 3D functions. Please refer to Onscreen
  • Acer X1270 | User Manual - Page 29
    English 19 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of the remote control or control panel again. The OSD menu will close and the projector will automatically save the new settings. Main menu Setting Sub menu
  • Acer X1270 | User Manual - Page 30
    20 Color English Display Mode Wall color Brightness Contrast Saturation Tint There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation. • Standard: For common environment. • Video: For playing video in a
  • Acer X1270 | User Manual - Page 31
    shown in incredible detail. Effects the representation of dark scenery. With greater gamma value, dark scenery looks brighter. Note: "Saturation" and "Tint" functions are not supported under computer or HDMI mode.
  • Acer X1270 | User Manual - Page 32
    . • Front-Ceiling: When you select this function, the projector inverts the image for ceiling-mounted projection. Adjust image distortion caused by tilting projection. (±40 degrees)(for X1170/X111/X1170N/X1270N series only) Projection mode (for X1270/X1270Hn/X1170A series only) • Front: The factory
  • Acer X1270 | User Manual - Page 33
    Manual " changes the projector's refresh rate HDMI image. Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under HDMI, DVI or Video mode. Note: "Sharpness" functions is not supported under HDMI (RGB) or Computer mode. Note: "HDMI Color Range" and "HDMI
  • Acer X1270 | User Manual - Page 34
    default startup screen of your Acer projector. • User: Use memorize picture from "Screen Capture" function. Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. (for X1270/X1270Hn/X1170A series only) Notice
  • Acer X1270 | User Manual - Page 35
    on.", the user has to enter the password every time when the projector is turned on. Note: This screen capture function is limited by 4:3 aspect ratio only. Note: For XGA models, to get best quality for you desired image, suggest end-user set PC resolution to 1024 x 768 before you use this
  • Acer X1270 | User Manual - Page 36
    is the number which will be accepted by projector anytime no matter what the Administrator Password is. • If losing this security card and number, please contact with an Acer service center. Default is "Off". Choose "On" to enable VGA OUT connection. (for X1270/X1270Hn/X1170A only) LAN Default is
  • Acer X1270 | User Manual - Page 37
    Lamp Hour Elapse Lamp Reminding Lamp Hour Reset Choose "On" to dim the projector lamp which will lower power consumption, extend the lamp life lamp 30 hours before its expected end-of-life. Press the button and choose "Yes" to turn the lamp hour counter to 0 hours. Audio Volume (for X1270
  • Acer X1270 | User Manual - Page 38
    image (for DLP 3D). Choose "On" to display the 3D warning message. Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three
  • Acer X1270 | User Manual - Page 39
    29 Language English Language Choose the multilingual OSD menu. Use the or key to select your preferred menu language. • Press to confirm the selection.
  • Acer X1270 | User Manual - Page 40
    in Open browser and enter the Server IP address by 192.160.100.10 to find below homepage of acer LAN webpage management. A password is needed to login in before using. Select a user. Administrator is into homepage with correct password. Note: LAN control function is supported in X1270Hn series only.
  • Acer X1270 | User Manual - Page 41
    , Control Panel, Networking Setting and Alert Setting. Note: Control Panel and Network Setting are only for Administrator account. Control Panel Enduser can control and adjust projector setting value via this page.
  • Acer X1270 | User Manual - Page 42
    Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply". Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can send mail with error message right
  • Acer X1270 | User Manual - Page 43
    33 Logout After tap Logout, you will return to login page within 5 seconds. English
  • Acer X1270 | User Manual - Page 44
    34 Appendices English Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears •
  • Acer X1270 | User Manual - Page 45
    • If you experience difficulty changing resolutions or your monitor freezes, restart all equipment including the projector. 4 The screen of the • If you are using a Microsoft® Windows® based notebook computer is not displaying your notebook: Some notebook PCs may deactivate their own screens
  • Acer X1270 | User Manual - Page 46
    too small • or too large • • 10 Image has slanted • sides • • 11 Image is reversed • Adjust the zoom lever on the top of the projector. Move the projector closer to or further from the screen. Press "MENU" on the remote control. Go to "Image -> Aspect Ratio" and try different settings or press
  • Acer X1270 | User Manual - Page 47
    Message Reminder Fan Fail - the system fan is not working. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it
  • Acer X1270 | User Manual - Page 48
    38 Problems with the Projector English # Condition Solution 1 The projector stops responding If possible, turn off the projector, then to all controls unplug the power cord and wait at least 30 seconds before reconnecting power. 2 Lamp burns out or makes a popping sound When the lamp
  • Acer X1270 | User Manual - Page 49
    LED Red -- --- Turning off -- (cooling state) Turning off -- (cooling completed) Error (thermal failure) -- Error (fan lock failure) -- Error (lamp breakdown) Error (color Wheel fail) V Quick flashing Temp LED Red -- --- -- -- V Quick flashing --- Power LED Red Blue V -- --- Quick
  • Acer X1270 | User Manual - Page 50
    can cause overheating and damage the projector. 1 RESYNC MENU POWER LAMP TEMP SOURCE 2 RESYNC MENU POWER LAMP TEMP SOURCE Follow these steps: 1 Turn the projector off. Wait for the Power LED or the filter is broken, please contact your local dealer or service center to obtain a new filter.
  • Acer X1270 | User Manual - Page 51
    Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp. The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the
  • Acer X1270 | User Manual - Page 52
    Change the Lamp 1 Turn off the projector by pressing the power button. 2 Allow the projector at least 30 mins to cool down. 3 Disconnect the power cord. 4 Open the screw cover on the right side of the projector. (Illustration #1) 5 Remove the screw on the right side of the projector. (Illustration
  • Acer X1270 | User Manual - Page 53
    English 43 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base.
  • Acer X1270 | User Manual - Page 54
    - For heat dissipation Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. 4 Attach the ceiling bracket to the ceiling rod. Screw Type A 50 mm length/ 8 mm
  • Acer X1270 | User Manual - Page 55
    screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models X1170/X111/X1170N/X1270N/ X1170A/X1270/X1270Hn Screw Type B Diameter (mm) Length (mm) 3 20 Washer Type Large Small V V 55.00 mm 55.00 mm 82.30 mm 75.28 mm
  • Acer X1270 | User Manual - Page 56
    without notice. For final specs, please refer to Acer's published marketing specifications. Projection system Resolution Computer package contents DLP® X1170/X111/X1170N/X1170A: Native: SVGA (800 x 600) , Maximum: UXGA (1600 x 1200), 1080p(1920x1080) X1270N/X1270/X1270Hn: Native: XGA (1024 x
  • Acer X1270 | User Manual - Page 57
    V HDMI X X RJ45 LAN input X X Composite video V X S-Video V X VGA output X X VGA IN 1 V V VGA IN 2 X X RS232 X X 3.5 mm audio jack input X X 3.5 mm audio jack output X X X1170A/ X1270 V V X X V V V V V V V V X1270Hn V V V V V V V V V V V V * Design and specifications
  • Acer X1270 | User Manual - Page 58
    48 English Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes VGA SVGA XGA SXGA QuadVGA SXGA+ UXGA Power Mac G4 i Mac DV (G3) Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768
  • Acer X1270 | User Manual - Page 59
    [KHz] 15.70 31.47 15.60 31.25 45.00 37.50 33.75 28.10 67.50 56.25 27.00 26.97 B. HDMI Digital 1 HDMI - PC Signal Modes VGA SVGA Resolution 640x480 640x480 640x480 640x480 640x480 800x600 800x600 V.Frequency [Hz] 60 72 75 85 119.51 56 60 H.Frequency
  • Acer X1270 | User Manual - Page 60
    50 English XGA PowerBook G4 i Mac DV (G3) 800x600 800x600 800x600 800x600 1024x768 1024x768 1024x768 1024x768 1152x864 1152x864 1280x1024 1280x1024 1280x1024 1280x1024 1280x960 640x480 640x480 800x600 1024x768 1152x870 1280x960 1024x768 2 HDMI - Extended Wide timing 72 75 85 119.85 60 70 75 119
  • Acer X1270 | User Manual - Page 61
    51 English 3 HDMI - Video Signal Modes Resolution 480i 720x480(1440x480) 480p 720x480 576i 720x576(1440x576) 576p 720x576 720p 1280x720 720p 1280x720 1080i 1920x1080 1080i 60 67.50 50 56.26 24 27.00 23.97 26.97 30-100 kHz 50 - 85 Hz, 120Hz (for 3D mode only) 165 MHz
  • Acer X1270 | User Manual - Page 62
    52 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
  • Acer X1270 | User Manual - Page 63
    du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors
  • Acer X1270 | User Manual - Page 64
    Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.it Hereby declare that: Product: Trade Name: Model Number: Machine Type: Projector Acer DSV1119/DSV1120/DNX1121/DNX1122 X1170/X111/X1170N/X1170A/X1270/X1270N/X1270Hn Is compliant with the essential requirements and other relevant provisions of
  • Acer X1270 | User Manual - Page 65
    Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan The standards listed below are applied to 328 -. EN301 893 (Applicable to 5GHz high performance RLAN). Year to begin affixing CE marking 2012. RU Jan/Sr. Manager Regulation Center, Acer Inc. Apr. 30, 2012 Date
  • Acer X1270 | User Manual - Page 66
    local Manufacturer / Importer is responsible for this declaration: Product: DLP Projector Model Number: DSV1119/DSV1120/DNX1121/DNX1122 Machine Type: X1170/X111/X1170N/X1170A/X1270/X1270N/ X1270Hn Name of Responsible Party: Acer America Corporation Address of Responsible Party: 333 West San
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
Acer Projector
X1170/X111/X1170N/X1270N/
X1170A/X1270/X1270Hn Series
User's Guide