Acer X1626H User Manual
Acer X1626H Manual
 |
View all Acer X1626H manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer X1626H manual content summary:
- Acer X1626H | User Manual - Page 1
Acer DLP Projector X1626H/D566D/EV-WU57H/ P1625/M446/DX625/BS-525/ AWU1716/P1650/M366/PE- WU46/PR620/MF-520/ AWU1703/H6530BD/E352D/ HE-823J/GM522/VH-422/ A1P1701 Series User's Guide Copyright © 2018. Acer Incorporated. All Rights Reserved. Acer Projector User's Guide Original Issue: 02/2018 - Acer X1626H | User Manual - Page 2
Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no Acer Incorporated. Acer Projector Model number Serial number Date of purchase Place of purchase Acer and the Acer logo are registered trademarks of Acer - Acer X1626H | User Manual - Page 3
document for future reference. Follow all warnings and instructions marked on the product. Turning the product off power outlet. • Unplug the power cord before removing the power supply unit from the projector. • If the system has multiple sources of power, disconnect power from the system by - Acer X1626H | User Manual - Page 4
surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices or lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure of - Acer X1626H | User Manual - Page 5
performance, indicating a need for service • the product does not operate normally after following the operating instructions Note: Adjust only those look into the projector's lens when the lamp is on. The bright light may hurt your eyes. RG2 IEC 62471-5:2015 • Turn on the projector first and - Acer X1626H | User Manual - Page 6
center when you need to change the lamp. • The product will detect the life of the lamp itself. Please contact your local dealer or Acer service center for changing the lamp, when lamp warning message displays. • Do not attempt to disassemble this projector. There are dangerous high voltages inside - Acer X1626H | User Manual - Page 7
can't hear people speaking near you. Disposal instructions Do not throw this electronic device into the acer-group.com/public/ Sustainability/index.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: "Lamp(s) contain Mercury, Dispose Properly." Lamp - Acer X1626H | User Manual - Page 8
's guide to maximize the life of your unit. Warning: • Do not look into the projector's lens when the lamp is lamp itself. Please contact your local dealer or Acer service center for changing the lamp, when lamp warning message displays. • When switching the projector off, please ensure the projector - Acer X1626H | User Manual - Page 9
7 Getting Started 8 Connecting the Projector 8 NTurning the Projector On/Off 10 Turning On the Projector 10 Turning Off the Projector 11 Adjusting the Projected Image 12 17 Image 21 Setting 23 Management 27 Audio 28 3D 29 Language 30 Appendices 31 Troubleshooting 31 - Acer X1626H | User Manual - Page 10
LED & Alarm Definition Listing 35 Ceiling Mount Installation 36 Specifications 39 Compatibility Modes 42 Regulations and safety notices 46 - Acer X1626H | User Manual - Page 11
a single-chip DLP® projector, including the following outstanding features: • DLP® technology • Enables projecting 3D content via DLP Link Technology: Blu-Ray 3D supported • One-touch "3D" button on remote control allows quick and easy access to the 3D functions • Acer ColorBoost technology delivers - Acer X1626H | User Manual - Page 12
Contact your dealer immediately if any thing is missing. English Projector Power cord VGA cable (Optional) HDMI cable (Optional) Security card (Optional) User's guide (CDROM) (Optional) Remote control Quick start guide AAA Battery x 2 Carrying case (Optional) WirelessHD dongle kit (MWIHD1 - Acer X1626H | User Manual - Page 13
English Projector Overview Projector Outlook Front/upper side 1 3 3 4 5 2 6 7 # Description # Description 1 Control panel # Description 1 HDMI connector 2 HDMI (MHL) connector 3 DC 5V output (service) 4 Analog RGB signal/HDTV/ component video input connector 5 Monitor loop-through - Acer X1626H | User Manual - Page 14
ENTER 6 BACK 7 TEMP 8 SOURCE 9 Four directional selection keys 10 MENU 3 Description Lamp indicator LED. Power indicator LED Adjusts image distortion caused by tilting projection. Refer to the "NTurning the Projector On/Off" section. Confirms your selection of items. Cancels your selection, or - Acer X1626H | User Manual - Page 15
15 16 17 18 19 18 20 21 MC.JPQ11.003 MC.JMV11.007 # Function 1 POWER 2 RATIO 3 Laser 4 Keystone Description Refer to the "NTurning the Projector On/Off" section. Chooses an aspect ratio. Emits visible laser pointer light for presentation purposes. This function is not available for the - Acer X1626H | User Manual - Page 16
Description 7 VGA To change source to VGA. This connection supports analog RGB, and YPbPr (480i/480p/576i/576p/720p/1080i models) 11 Infrared transmitter Sends signals to the projector. 12 3D Press to open the 3D menu for adjusting 3D settings. 13 SOURCE Changes the active source. 14 - Acer X1626H | User Manual - Page 17
7 English MHL Feature Introduction When your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. this button to select the next or previous page. (No function) 22 MUTE Mutes or unmutes the projector's volume. (No function) - Acer X1626H | User Manual - Page 18
English 8 Getting Started Connecting the Projector 2 2 LR HDTV adapter 3 3 9 10 3 4 5 7 8 Smart devices 5 RCA 6 Display Video Output 2 Speakers 11 12 13 Screen 1 - Acer X1626H | User Manual - Page 19
works well with your computer, please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD (MWIHD1), MWA3, - Acer X1626H | User Manual - Page 20
1 Ensure that the power cord and signal cable are securely connected. The Power LED will light red. 2 Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. 3 Turn on your source (computer, notebook, video - Acer X1626H | User Manual - Page 21
indicator will turn solid red. Contact your local dealer or service center. • "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED Temp indicator - Acer X1626H | User Manual - Page 22
English 12 Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with two elevator feet for adjusting the image height. To raise the image: 1 Use the front Tilt adjusting wheel to raise the image - Acer X1626H | User Manual - Page 23
how to achieve a desired image size by adjusting either the position or the zoom ring. • H6530BD/E352D/HE-823J/GM522/VH-422 To obtain an image size of 70", set the projector at a distance between 2.3 m and 2.6 m from the screen and adjust the zoom level accordingly. 2.6 m 2.3 m Desired distance - Acer X1626H | User Manual - Page 24
/M366/PE-WU46/PR620/MF-520/X1626H/D566D/EV-WU57H/P1625/ M446/DX625/BS-525 To obtain an image size of 70" set the projector at a distance between 2.2 m and 2.7 m from the screen and adjust the zoom level accordingly. English 70" Desired image size 2.7 m 2.2 m Desired distance Height: 94 cm From - Acer X1626H | User Manual - Page 25
" on the control panel or remote control to launch the OSD for projector installation and maintenance. 3 The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and Press "MENU" anytime to exit the menu and return to the Acer welcome screen. - Acer X1626H | User Manual - Page 26
return to the main menu. • To exit the OSD menu, press "MENU" on the control panel or remote control again. It will close and the projector will automatically save the new settings. Main menu Submenu Setting Note: Some of the following OSD settings may not be available. Please refer to the - Acer X1626H | User Manual - Page 27
When this function is enabled, LumiSense will be automatically set to "Off". The projector can intelligently optimizes the brightness and color saturation of projected image. The feature greatly will be automatically set to "Off". LumiSense function is unavailable when 3D is set to "On" - Acer X1626H | User Manual - Page 28
18 English Display Mode Color Profile Wall Color Brightness Contrast There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation with higher brightness. • Standard: For common environment. • Video: For - Acer X1626H | User Manual - Page 29
Saturation Tint Color Temperature Gamma 19 Adjusts a video image from black and white to fully saturated colors. • Press to decrease the amount of color in the image. • Press to increase the amount of color in the image. Adjusts the color balance of red and green. • Press to increase the amount of - Acer X1626H | User Manual - Page 30
ISF certified installation technician. For more information, go to www.imagingscience.com or contact the dealer or retailer from whom you purchased the projector. Available when User 1/User 2/User 3 is selected in the Display Mode menu. You can change User 1/User 2/User 3 to your preferred mode name - Acer X1626H | User Manual - Page 31
in by 1.333 times. Automatically adjusts image distortion caused by tilting projection (±40 degrees). Manually adjusts image distortion caused by tilting projection (±40 degrees). Manual Keystone Sharpness H. Position (Horizontal Position) This function is unavailable when Auto Keystone is set - Acer X1626H | User Manual - Page 32
image down. to move the image up. Frequency Tracking Changes the projector's refresh rate to match the frequency of your computer's graphics card. : "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video or HDMI mode. Note: "HDMI Color Range" and "HDMI - Acer X1626H | User Manual - Page 33
Acer projector. • User: Use the memorized picture from the "Screen Capture" function. Use this function to customize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions shown. • Source Selection • Manual: When switching input signals, you - Acer X1626H | User Manual - Page 34
CEC Security Selecting "On" enables the function. The MHL port(s) and the DC 5V out port/USB A port (if available) on the projector can output 5V power when the projector is turned on. Only MHL port(s) will provide power output when MHL port(s) and USB A port are both plugged. Selecting "On" allows - Acer X1626H | User Manual - Page 35
to "On", you can set timeout function. • Press to select timeout duration. • The range is from 10 to 990 minutes. • When time is up, the projector will request you to enter the password again. • The factory default setting of "Timeout (Min.)" is "Off". • Once the security function is enabled, the - Acer X1626H | User Manual - Page 36
" which is printed on the Security Card that came with your projector. This unique password will be accepted by the projector no matter what the administrator password is. • If the Security Card is lost, please contact your local Acer service center. Lock User Startup Screen This function is set to - Acer X1626H | User Manual - Page 37
Choose "On" to dim the projector lamp, which will also lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return Manual: The OSD menu remains active. The only way to launch or exit the OSD menu is by pressing "MENU". Selecting "On" enables the function. The projector - Acer X1626H | User Manual - Page 38
message is displayed. The message will show up 30 hours before end of life. • Lamp Hour Reset: Press "ENTER" after choosing "Yes" to reset the lamp hour counter to 0 hours. Displays current status of this projector. Audio Volume Mute Power On/Off Volume Alarm Volume • Press to decrease the volume - Acer X1626H | User Manual - Page 39
need to execute "Invert" to get best match of left/right image sequence to get the correct image (for DLP 3D). Choose "On" to display the 3D warning message. 3D Warning Message Note: Supported 3D signal timings: Signal source type Video/S-Video/Component video VGA/HDMI (PC mode) HDMI (Video mode - Acer X1626H | User Manual - Page 40
.at/Downloads/Index_en.aspx - DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef3-D-Experience-4.0.2.html Note: "3D L/R Invert" and "3D Format" are only available when "3D" is enabled. Language Language Sets a language for the OSD menus. Use to select your preferred language. - Acer X1626H | User Manual - Page 41
31 Appendices English Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears • Make - Acer X1626H | User Manual - Page 42
Each has a different way to be reactivated. Refer to your computer's manual for detailed information. • If you are using an Apple® Mac® OS you play a 4:3 format DVD title, please change the format to 4:3 with the projector OSD. • If the image is still stretched, you will also need to adjust the - Acer X1626H | User Manual - Page 43
2 Lamp burns out or makes a popping sound When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, contact your local dealer or Acer service - Acer X1626H | User Manual - Page 44
34 English OSD Messages # Condition 1 Message Message Reminder Fan Fail - the system fan is not working. Fan Fail. Lamp will automatically turn off soon. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. - Acer X1626H | User Manual - Page 45
35 LED & Alarm Definition Listing LED Messages English Message Standby (Power cord plugged in) Power on Lamp retry Turning off (Cooling state) Turning off (Cooling completed) Firmware download Error (Thermal failure) Error (Fan lock failure) Power LED Red Blue V -- --- Quick flashing V V - Acer X1626H | User Manual - Page 46
English 36 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, Type 1 Type 2 Type 3 3 Type 1: For the standard size use three bracket screws to mount the projector to the ceiling mount bracket. - Acer X1626H | User Manual - Page 47
Type 3: Alternatively, for the larger size, use the sliding extensions for more supports. Type 1 Type 2 Type 3 English Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. 4 Connect the main body connector to the - Acer X1626H | User Manual - Page 48
English 38 Screw Type B Diameter (mm) Length (mm) 4 25 198.10 189.05 Large V Washer Type Small V 1.45 9.04 64.38 60.87 63.62 56.50 114.75 124.85 124.60 112.00 343.06 92.47 Unit: mm - Acer X1626H | User Manual - Page 49
please refer to Acer's marketing documentation. D x H) DLP™ Native: WUXGA (1920 x 1200) Maximum: WUXGA (1920 x 1200) (supports reduce blanking only) = 1.94 - 2.06, f = 15.57 mm - 18.67 mm, 1:1.2 Manual Zoom and Manual Focus • H6530BD/E352D/HE-823J/GM522/VH-422: 27" - 301" (68.6 cm - 764.5 cm - Acer X1626H | User Manual - Page 50
mode: 240 W @ 100 VAC Standby mode: < 0.5 W 0ºC to 40ºC / 32ºF to 104ºF H6530BD/E352D/HE-823J/GM522/VH-422: • Power socket x 1 • USB Type A (DC 5V OUT) Remote control x 1 • Battery x 2 (for the remote control) • Quick start guide x 1 • User's guide (CD-ROM) x 1 • VGA cable x 1 • HDMI cable x 1 • - Acer X1626H | User Manual - Page 51
Compatibility Modes 1 VGA Analog - PC Signal Mode Resolution VGA 640 x 480 SVGA 800 x 600 XGA 1024 x 768 SXGA 1152 x 864 1280 x 1024 QuadVGA SXGA+ UXGA PowerBook G4 1280 x 960 1280 x 960 1400 x 1050 1600 x 1200 640 x 480 640 x 480 800 x 600 1024 x 768 1024 x 768 1152 x 870 V.Frequency [ - Acer X1626H | User Manual - Page 52
42 English 1280 x 768 1280 x 768 WXGA 1280 x 768 1280 x 720 1280 x 800 1280 x 800 - RB WSXGA+ acer_16:9 1440 x 900 1680 x 1050 1366 x 768 HD 1080 acer_timing WUXGA 1920 x 1080-RB 1920 x 1080-EIA 1024 x 600 1920 x 1200-RB 2 HDMI - PC Signal Mode Resolution VGA_60 VGA_72 VGA_75 VGA_85 - Acer X1626H | User Manual - Page 53
43 English SXGA+_60 1400 x 1050 UXGA_60 1600 x 1200 Mac G4 640 x 480@60Hz MAC13 640 x 480@67Hz Mac G4 800 x 600@60Hz Mac G4 1024 x 768@60Hz MAC19 1024 x 768@75Hz MAC21 1152 x 870@75Hz WXGA_60 WXGA_75 1280 x 768 WXGA_85 WXGA_60 1280 x 720 WXGA_60 1280 x 800 WXGA_120-RB 1280 - Acer X1626H | User Manual - Page 54
44 English 1080p 1920 x 1080 30 4 MHL - Video Signal 33.75 Mode 480i 480p 576i 576p 720p 720p 1080i 1080i 1080p 1080p 1080p 1080p 1080p Resolution 720 x 480 (1440 x 480) 720 x 480 720 x 576 (1440 x 576) 720 x 576 1280 x 720 1280 x 720 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x - Acer X1626H | User Manual - Page 55
46 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee - Acer X1626H | User Manual - Page 56
including interference that may cause undesired operation of the device. b Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. List of applicable countries This device must - Acer X1626H | User Manual - Page 57
-921, Fax: +39-02-9399-2913 www.acer.it Product: Trade Name: Model Number: Projector Acer AWU1703/AWU1716/A1P1701 Marketing Name: P1650/M366/PE-WU46/PR620/MF-520/X1626H/ D566D/EV-WU57H/P1625/M446/DX625/BS525/H6530BD/E352D/HE-823J/GM522/VH-422 We, Acer Incorporated, hereby declare under our sole - Acer X1626H | User Manual - Page 58
local Manufacturer /Importer is responsible for this declaration: Product: Model Number: Name of Responsible Party: Address of Responsible Party: Contact Person: Phone No.: Fax No.: DLP Projector AWU1703/A1P1701 series Acer America Corporation 333 West San Carlos St. Suite 1500 San Jose, CA 95110
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
 |
 |
Acer DLP Projector
X1626H/D566D/EV-WU57H/
P1625/M446/DX625/BS-525/
AWU1716/P1650/M366/PE-
WU46/PR620/MF-520/
AWU1703/H6530BD/E352D/
HE-823J/GM522/VH-422/
A1P1701
Series User's Guide
Copyright © 2018. Acer Incorporated.
All Rights Reserved.
Acer Projector User's Guide
Original Issue: 02/2018