Acer X203Hbd X203W LCD Monitor User's Guide
Acer X203Hbd - 20" LCD Monitor Manual
 |
UPC - 884483195930
View all Acer X203Hbd manuals
Add to My Manuals
Save this manual to your list of manuals |
Acer X203Hbd manual content summary:
- Acer X203Hbd | X203W LCD Monitor User's Guide - Page 1
does not function properly, please refer to the troubleshooting section to diagnose the problem. Troubleshooting Tips No Power - The monitor's power indicator is off. Make sure the monitor power cable is fully inserted in the monitor's power port and the electrical outlet. Test the electrical - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 2
safety notices X203W FCC if not installed and used in accordance with the instructions, may cause harmful interference to radio communica- tions interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer . LCD Monitor Quick Setup Guide - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 3
environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. LCD Monitor Quick Setup Guide - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 4
Dot Clock Max. Resolution Plug & Play ENERGY STAR ON Mode OFF Mode Power Consumption ( Maximum ) Input Connector Input Video Signal Maximum Screen Size Power Source X203W TFT Color LCD 20.0" W 0.258mm( Horizontal : 433.44mm Vertical : 270.9mm 100~240VAC,50~60Hz LCD Monitor Quick Setup Guide - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 5
English SPECIFICATION X203W Environmental Considerations Operating Temp: 50 to 350C Storage Temp.: -200 to 600C Operating Humidity model) DDCCI On/Off Display information Reset Exit * All specifications are subject to change without notice. Regulatory Compliance LCD Monitor Quick Setup Guide - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 6
5 Attaching/Removing the base 6 Screen position adjustment 6 Connecting the power cord 7 Safety precaution 7 Cleaning your monitor 7 Power saving 8 DDC 8 Connector Pin Assignment 9 Standard Timing Table 11 Installation 12 User controls 13 How to adjust a setting 14 Troubleshooting 19 - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 7
X203W SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. NOTES · Due to pixel or a pixel lit all of the time. · Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 8
X203W Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions this product near water. • Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. • Slots - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 9
change in performance, indicating a need for service • the product does not operate normally after following the operating instructions zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting • stand up and walk around regularly to remove the strain on - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 10
and reflections by: • placing your display in such a way that the side faces the window or any light source • minimizing room light by using drapes, shades or blinds • using a task light • changing the display's viewing angle • using a glare-reduction filter • using a display visor, such as - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 11
the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. · LCD Monitor · D-Sub Cable · DVI Cable · AC Power Cord (Only Dual-Input Model) · User Manual · Quick Start Guide EN-5 - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 12
X203W Attaching / Removing the Base Install: Align the release button on the bottom of the monitor with the corresponding slots on the bottom of the base. Remove: Depress the release button as indicated first before removing the base and follow the - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 13
X203W CONNECTING THE POWER CORD · Check first to make sure that the power cord you use is the correct type required for your area. · This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. · Plug one - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 14
X203W Power saving The monitor will be driven supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing. The monitor supports - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 15
CONNECTOR PIN ASSIGNMENT X203W 15-Pin Color Display Signal Cable PIN NO. 1. 2. 3. 4. 5. 6. 7. 8. DESCRIPTION Red Green Blue Monitor Ground DDC-return R-Ground G-Ground B-Ground PIN NO. 9. 10. 11. 12. 13. 14. 15. DESCRIPTION +5V Logic Ground Monitor Ground DDC-Serial Data H-Sync V-Sync DDC- - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 16
X203W 24-Pin Color Display Signal Cable PIN Meaning PIN Meaning 1. TMDS Data2- 5. NC 17. TMDS Data0- 6. DDC Clock 18. TMDS Data0+ 7. DDC Data 19. TMDS Data 0/5 Shield 8. NC 20. NC 9. TMDS Data1- 21. NC 10. TMDS Data1+ 22. TMDS Clock Shield 11. TMDS Data 1/3 Shield 23. - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 17
X203W Standard Timing Table To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the Auto Setup under Windows VESA 19 VESA Resolution 720 x 400 - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 18
to the monitor, then to a properly grounded AC outlet. 3. Power-ON Monitor and Computer Power-ON the monitor first, then power-ON the computer. This sequence is very important. 4. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem. EN - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 19
USER CONTROLS X203W 3 4 6 5 5 12 Front Panel Controls 1.Power Switch: To turn ON or OFF , Clock and Focus. 5.< / > Press < or > to select the desired function.Press < or > to change the settings of the current function. 6.MENU / ENTER: Activate OSD menu when OSD is OFF or activate/de-activate - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 20
X203W HOW TO ADJUST A SETTING 1. Press the MENU-button to activate the OSD window. 2. Press < or > to select the desired function. 3. Press the MENU-button to select the function that you want to adjust. 4. Press < or > to change the settings of the current function. 5. To exit and save, select the - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 21
· ADJUSTING THE PICTURE The descriptions for function control LEDS A. Acer eColor Management X203W Main Menu icon Sub Menu icon N/A N/A N/A N/A N/A Sub Menu item Description User mode User defined. Settings can be fine-tuned to suit any situation Optimal balance - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 22
X203W Main Menu Icon Sub Menu Icon N/A N/A Sub Menu Item H. Position V. Position Warm Cool Description Adjust the horizontal position. (available in Analog mode only) Adjust the - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 23
Main Menu Icon X203W Sub Menu Icon Sub Menu Item H. Position Description Adjust the horizontal position of DVI) (only Dual-Input Model) N/A DDC/CI Turn ON/OFF DDC/CI support N/A Information Show the resolution, H/V frequency andinput port of current input timing. N/A Reset Clear each old - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 24
Management OSD X203W · Operation instructions Acer eColor Management Step 1: Press " Key " to open the Acer eColor Management OSD and access the scenario modes Step 2: Press "" to select the mode Step 3: Press " Auto Key " to confirm the mode and run - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 25
X203W TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. (VGA Mode) Problems Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. - Acer X203Hbd | X203W LCD Monitor User's Guide - Page 26
(DVI Mode) X203W Problems No Picture Current Status Remedy LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings. LED OFF · Check the power switch. · Check if AC power cord is properly connected to the monitor. LED displays amber color · Check if
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
 |
 |
LCD Monitor Quick Setup Guide
X203W
English
Safety Instructions
Observe the folowing safety guidelines when connection and using your monitor:
•
Be sure that your monitor is electrically rated to operate with the AC power available in
your location.
•
Locate your monitor near an easily accessible electrical outlet.
•
Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or touched
with a sharp or abrasive implement.
•
Put your monitor in a location with low humidity and a minimum of dust.
•
Never use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable, and keep
the cable away from where people could trip over it.
•
Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.
•
To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor’s case.
•
Be sure to hold the plug, not the cable, when disconnecting the monitor from an electrical outlet.
•
Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be
blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface.
•
Doing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some
other enclosed space, be sure to provide adequate ventilation.
•
Do not expose the monitor to rain or use it near water. If the monitor accidentally gets wet, unplug it and contact an
authorized dealer immediately. You can clean the exterior of the monitor with a damp cloth when necessary, but be sure
to unplug the monitor first. If your monitor does not operate normally-in particular, if there are any unusual sounds or smells
coming from it -unplug the monitor immediately and contact an authorized dealer or service center.
Connecting Your Monitor to a Computer
1.Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the video cable to the computer.
c. (only Dual-Input Model) Connect one end of the 24-pin DVI cable to the back of the
monitor and connect the other
end to the computer’s port.
2. Connect power cord
Connect the power cord to the monitor, then to a properly grounded AC outlet.
3. Connect the Audio Cable.(optional)
4. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
5. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.
Troubleshooting Tips
No Power - The monitor’s power indicator is off.
Make sure the monitor power cable is fully inserted in the monitor’s power port and the electrical outlet.
Test the electrical oulet by plugging in a working electrical device such as a lamp.
Try another power cable on the monitor. You can use the computer’s power cable to perform this test.
No Video - The monitor’s power indicator is on but theere are no
image on the screen.
Ensure that the video connector is properly connected to the computer.
Ensure that the computer is on and functioning properly.
Turn off the monitor and check the video cable pins. Make sure no pins are bent.
Operationg Detail
Please refer to user’s guide in CD-ROM packaged with this monitor