Acer X223 X223W LCD Service Guide - Page 14
Take a key function board to hook with front, bezel No.1~2 and connect to key function, cable. - x223w disassemble
View all Acer X223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
4. Assembly and Disassembly Procedures (continued) ACER X223W 13 Go to cover page S8 Connect FFC cable to LCD panel. There are two locks over here when plugging in should be noticed S10 Use a Phillips-head screwdriver screwed the No.1~4 screws on both side and assemble the LCD panel and bracket chassis module. (No1~4 screw size=M3x6; Torque=3~4KGFxCM). 1 2 3 4 S7 S8 Plug in parallel direction Angel < 5 degrees Use a Phillips-head screwdriver screwed the S11 No.1~2 screws. (No1~2 screw size=M3x10; Torque=3~5KGFxCM). 1 2 S12 Use a Hex-head screwdriver screwed the DVI and D-SUB connectors (No.1~4Hex Nut screws Size=M3x8;Torque=3~5KGFxCM). 2 1 Plug 8 lamp cables to the connectors of power S9 board.(Both of right and left sides) S13 Take a key function board to hook with front bezel (No.1~2) and connect to key function cable. 1 2