Acer XD1150 XD1150 User's Guide EN

Acer XD1150 Manual

Acer XD1150 manual content summary:

  • Acer XD1150 | XD1150 User's Guide EN - Page 1
    Manual for Acer Projector XD1150/XD1150D/ XD1250/XD1250D series
  • Acer XD1150 | XD1150 User's Guide EN - Page 2
    Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle it. USA For electronic products containing an LCD/CRT monitor or display, or a super high pressure mercury lamp: Lamp
  • Acer XD1150 | XD1150 User's Guide EN - Page 3
    19 How to operate ...19 Color (Computer/Video Mode 20 Image (Computer/Video Mode 22 Management (Computer/Video Mode 24 Audio (Computer/Video Mode 31 Timer (Computer/Video Mode 32 Language(Computer/Video Mode 33 Appendices 34 Troubleshooting 34 Replacing the lamp 38 Specifications ...39
  • Acer XD1150 | XD1150 User's Guide EN - Page 4
    instructions. This product will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages. Reset the "Lamp Hour Reset" function from the On Screen Display "Management" menu after replacing the lamp module (refer to page 26) When switching the projector
  • Acer XD1150 | XD1150 User's Guide EN - Page 5
    Usage Notice Do:  Turn off the product before cleaning.  Use a soft cloth moistened with mild detergent to clean the display housing.  Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't:  Block the slots and openings on the unit
  • Acer XD1150 | XD1150 User's Guide EN - Page 6
    User friendly and powerful Acer Empowering key in- cluding: Acer eView Management, Acer eTimer Management and Acer eOpening Management.  High-tech DVI connection for digital signal with HDCP function and supports 480p, 576p, 720p and 1080i (XD1150D/XD1250D)  Full function remote control  Advanced
  • Acer XD1150 | XD1150 User's Guide EN - Page 7
    all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Projector with lens cap Power Cord 1.8m VGA Cable 1.8m (*): for XD1150D, XD1250D only. Composite Video Cable S-Video Cable 1.8m (*) 2.0m VGA to Component/ HDTV Adapter
  • Acer XD1150 | XD1150 User's Guide EN - Page 8
    Overview Main Unit 1 2 3 7 3 6 Two remote control receiver provided at front panel and front-top cover. 4 5 9 8 English ... 6 1. Focus Ring 2. Zoom Ring 3. Remote Control Receivers 4. Zoom Lens 5. Elevator Foot 6. Elevator Button 7. Power Socket 8. Connection Ports 9. Control Panel
  • Acer XD1150 | XD1150 User's Guide EN - Page 9
    Introduction Control Panel 5 4 3 6 7 21 1. Temp Indicator LED 2. Lamp Indicator LED 3. Power and Indicator LED (Power LED) 4. Source 5. Resync 6. Menu 7. Four Directional Select Keys 7 ... English
  • Acer XD1150 | XD1150 User's Guide EN - Page 10
    VIDEO VGA OUT USB RS232 9 1. DVI Input Connector (for Digital signal with HDCP function) (*) 2. VGA Input Connector (PC Analog Signal/HDTV/Component Video) 3. Audio Input Connector (*) 4. S-Video Input Connector 5. Composite Video Input Connector 6. Monitor Loop-through Output Connector (VGA
  • Acer XD1150 | XD1150 User's Guide EN - Page 11
    Introduction Remote Control 1 2 3 4 5 6 7 8 9 10 11 12 12 13 14 15 16 17 18 19 20  (*): Do not support function for XD1150/ XD1250. 1. Power 2. Resync 3. Source 4. Freeze 5. Hide 6. Aspect Ratio 7. Mute (*) 8. Four Directional Select Keys 9. Back 10. Keystone +/11. Menu 12.
  • Acer XD1150 | XD1150 User's Guide EN - Page 12
    the Projector 1 RGB USB 5 DVD Player, Settop Box, HDTV receiver 2 34 6 English ... 10 7 S-Video Output 8 10 9 Video Output 1...Power (XD1150D/XD1250D) 10 Composite Video Cable  To ensure the projector works well with your computer, please make sure the timing of the display mode is
  • Acer XD1150 | XD1150 User's Guide EN - Page 13
    signal cable are securely connected. The Power LED will flash red. 3. Turn on the lamp by pressing "Power" button on the control panel.  And the Power LED will turn blue. 4. Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically.  If the
  • Acer XD1150 | XD1150 User's Guide EN - Page 14
    normal conditions, the projector can be switched on again after it has cooled down. If the problem persists, you should contact your local dealer or our service center.  When the "TEMP" indicator flashes red for about 30 seconds, you will see a message "Fan fail. Lamp will automatically turn off
  • Acer XD1150 | XD1150 User's Guide EN - Page 15
    Installation Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with an elevator foot for adjusting the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired
  • Acer XD1150 | XD1150 User's Guide EN - Page 16
    You may turn the zoom ring to zoom in or out. To focus the image, rotate the focus ring until the image is clear. The projector will focus at distances from 3.28 to 39.4 feet (1.0 to 12.0 meters). Zoom Ring Focus Ring Adjusting Projection Image Size 304.93"(774.5cm) 254.10
  • Acer XD1150 | XD1150 User's Guide EN - Page 17
    two ways for you to control the functions: Remote Control and Control Panel. Control Panel Using the Control Panel Power  Refer to the "Power On/Off the Projector" section on pages 11-12. Resync  Automatically synchronizes the projector to the input source. Menu  Press "Menu" to launch to
  • Acer XD1150 | XD1150 User's Guide EN - Page 18
    Control (*): for XD1150D, XD1250D only. Using the Remote Control Power  Refer 11-12 to the "Power On/Off the Projector" section on pages Resync  Automatically synchronizes the projector to the input source. Source  Press "Source" to choose RGB, Component-p, Component-i, S-Video
  • Acer XD1150 | XD1150 User's Guide EN - Page 19
    Management" submenu. "Acer eOpening Management" allows user to change the Startup screen to their personalized image. Please refer to On Screen Display section for details. Volume (*)  Increase/decrease the volume. Page Up (Computer mode only)  Use this button the projector is to page up
  • Acer XD1150 | XD1150 User's Guide EN - Page 20
    (480p/576p/720p/1080i), YCbCr (480i/576i) and RGBsync. Component Video  Press "Component" to change source to component Video source. This source supports YPbPr (480p/576p/720p/1080i) and YCbCr (480i/576i) Composite Video  Press "Video" to change source to Composite Video source. S-Video  Press
  • Acer XD1150 | XD1150 User's Guide EN - Page 21
    Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD menu, press "Menu" on the Remote Control or Control Panel. 2. When OSD is displayed, use keys to select any item in
  • Acer XD1150 | XD1150 User's Guide EN - Page 22
    types of images.  Bright : For brightness optimization.  PC : For computer or notebook.  Video : For playing video in a bright environment.  Theater : For Home Theatre usage in a dark room.  sRGB : For true-color optimization.  User : Memorize user's settings. Brightness Adjust the brightness
  • Acer XD1150 | XD1150 User's Guide EN - Page 23
    of dark scenery. With greater gamma value, dark scenery will look brighter. Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color.  "Saturation" and "Tint" functions are not supported under computer mode or DVI mode. Saturation Adjusts a video image
  • Acer XD1150 | XD1150 User's Guide EN - Page 24
    Computer / Video Mode)  (*): for XD1150 the displayed image becomes 16:9 ratio. 4:3 : The input source will be scaled to fit the projection screen and becomes 4:3 projector turns the im- age upside down for ceiling-mounted projection.  Rear-Desktop When you select this function, the projector
  • Acer XD1150 | XD1150 User's Guide EN - Page 25
    User Controls Image (Computer / Video Mode)  "H. Position", "V. Position", "Frequency" and " Tracking" functions are not supported under DVI and Video mode.  Rear-Ceiling When you select this function, the projector reverses and turns the image upside down at same time. You can project from
  • Acer XD1150 | XD1150 User's Guide EN - Page 26
    User Controls Management (Computer / Video Mode) Auto Shutdown (Minutes) The projector will auto shutdown while there is no signal input after the setting time. Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost. When source
  • Acer XD1150 | XD1150 User's Guide EN - Page 27
    then execute Acer eOpening Management utility to download your desired image from your PC to projector. Before the download starts, the projector must enter "Download Mode" first. Please follow the instruction below to enter "Download Mode". 1. If the projector was turned on, press power button
  • Acer XD1150 | XD1150 User's Guide EN - Page 28
    User Controls Management (Computer / Video Mode) Lamp Hour Reset Press the button after choosing "Yes "to turn the lamp hour counter to 0 hours. Security Press to start "Security" setting. You must enter "Administrator Password" first before Security setting. Security This projector provides an
  • Acer XD1150 | XD1150 User's Guide EN - Page 29
    Computer / Video Mode) Once "Security" is set to "On", administrator can set timeout function. Press or to select timeout duration. The range is from 10 minutes to 990 minutes. When time is up, the projector will of password. Input password again at "Confirm Password". The password is allowed
  • Acer XD1150 | XD1150 User's Guide EN - Page 30
    User Controls Management (Computer / Video Mode) English ... 28 The projector provide two options of "Security Mode". Select "Request password only after plugging power cord", the project will request user to input password only for the first time plugging on power cord of the projector. Select
  • Acer XD1150 | XD1150 User's Guide EN - Page 31
    User Controls Management (Computer / Video Mode) If administrator forgot " Acer service center. They will give you new Administrator Password according to the Unlock ID. 3. Once the new "Administrator Password" retrieved from Acer has been logged into the projector, old "Administrator Password" will
  • Acer XD1150 | XD1150 User's Guide EN - Page 32
    User Controls Management (Computer / Video Mode) Reset Press the button after choosing "Yes" to return the display parameters on all menus to the factory default settings. English ... 30
  • Acer XD1150 | XD1150 User's Guide EN - Page 33
     Choose the "On" to turn mute on.  Choose the "Off" to turn mute off. Power On/Off Volume Choose this function to adjust volume when power on/off. Alarm Volume Choose this function to adjust volume when there are errors of the projector.  Audio menu is for XD1150D/XD1250D. 31 ... English
  • Acer XD1150 | XD1150 User's Guide EN - Page 34
    User Controls Timer (Computer / Video Mode)  (*): for XD1150D/ XD1250D only. Timer Start Press the to start/stop timer. Timer Period Press the to adjust timer period. Timer Volume (*) Choose
  • Acer XD1150 | XD1150 User's Guide EN - Page 35
    User Controls Language (Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your preferred language. Press to confirm the selection 33 ... English
  • Acer XD1150 | XD1150 User's Guide EN - Page 36
    English ... 34 Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen.  Ensure all the cables and power connections are correctly
  • Acer XD1150 | XD1150 User's Guide EN - Page 37
    projector. or your monitor Problem: The screen of the Notebook or PowerBook computer is not displaying your presentation.  If you are using a Notebook PC: Some Notebook Refer to page 23.  Change the monitor color setting from your computer. Problem: Image has vertical flickering bar  Use "
  • Acer XD1150 | XD1150 User's Guide EN - Page 38
    happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp". See page 38. Problem: LED lighting message Message Power LED Red Blue Standby State (Input power cord) Slow Flashing Lamp lighting Temp
  • Acer XD1150 | XD1150 User's Guide EN - Page 39
    Appendices Problem: Message Reminders  "Lamp is approaching the end of its useful life in full power opera- tion. Replacement Suggested!" will be shown about 10 seconds when lamp life is going to deplete.  "Projector Overheated. Lamp will automatically turn off soon." will be shown when the system
  • Acer XD1150 | XD1150 User's Guide EN - Page 40
    Allow it to cool down before changing lamp! The projector will detect the lamp life itself. It will show you a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, changing the lamp as soon as possible. Make sure
  • Acer XD1150 | XD1150 User's Guide EN - Page 41
    to Acer announced marketing specs. Light Valve Lamp Number of Pixels Displayable Color Contrast Ratio Uniformity Noise Level Projection Lens Projection Screen Size (Diag.) Projection Distance Video Compatibility H. Frequency V. Frequency Power Supply I/O Connectors - Single Chip DLP® Technology
  • Acer XD1150 | XD1150 User's Guide EN - Page 42
    Appendices Compatibility Modes  (*): for XD1250/ XD1250D only. Mode VESA VGA VESA VGA VESA VGA VESA VGA VESA VGA VESA VGA VESA VGA VESA VGA VESA VGA VESA SVGA VESA SVGA VESA SVGA VESA SVGA VESA SVGA VESA XGA VESA XGA VESA XGA VESA XGA VESA SXGA VESA SXGA (*) VESA SXGA VESA SXGA (*) VESA SXGA (*)
  • Acer XD1150 | XD1150 User's Guide EN - Page 43
    notices of your Acer Projector. FCC notice This device has been tested and found to comply instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will Shielded cables All connections to other computing devices must be made using shielded
  • Acer XD1150 | XD1150 User's Guide EN - Page 44
    appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Hereby, Acer, declares that this Acer projector is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. (Please visit http://global
  • Acer XD1150 | XD1150 User's Guide EN - Page 45
    fied service personnel under the following conditions: a. When the power cord or plug is damaged or frayed. b. If liquid has been spilled into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally when the operating instructions are followed
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

Manual for
Acer Projector XD1150/XD1150D/
XD1250/XD1250D series