Acer AOHAPPY2 Aspire One AOD257 and Happy 2 Netbook Service Guide - Page 106

3. Remove the thermal module from the mainboard as shown in Figure 3-22. Figure 3-22. Thermal Module Removal Thermal Module Installation 0 + IMPORTANT: Apply approved thermal grease and ensure all heat pads are in position before replacing module. ! CAUTION: Use caution when applying thermal grease. Thermal grease may cause damage to the mainboard. The following thermal grease types are approved for use: Silmore GP50 Honeywell Jet Motor 7762 The following thermal pads are approved for use: Eapus XR-PE 1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. 2. Apply small amount of thermal grease to center of CPU. NOTE: NOTE: Force used during installation of thermal module is sufficient to spread grease evenly over CPU top. 3. Install and secure two (2) non-captive screws (C) in numerical order from one (1) to four (2) to mainboard. Refer to Figure 3-21. 4. Connect thermal module cable (A) to mainboard connector (B). Refer to Figure 3-21. 5. Install mainboard. 3-26 Machine Maintenance Procedures