Acer Aspire 4349 Acer Aspire 4349, 4749, 4749Z Notebook Service Guide - Page 115
Place Thermal Module on Mainboard. Refer to, Eapus XR-PE
View all Acer Aspire 4349 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Jet Motor 7762 The following thermal pads are approved for use: Eapus XR-PE 1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and Isopropyl Alcohol, Acetone, or other approved cleaning agent. 2. Apply small amount of thermal grease to center of CPU. NOTE: NOTE: Force used during installation of thermal module is sufficient to spread grease evenly over CPU top. 3. Place Thermal Module on Mainboard. Refer to Figure 3-23. 4. Tighten three (3) captive screws (A) in numerical order from one (1) to three (3) to mainboard (Figure 3-23). Ensure the thermal module is properly aligned and seated. 5. Connect thermal module cable to mainboard connector (B) (Figure 3-23). 6. Install Mainboard. Machine Maintenance Procedures 3-27