Acer Aspire 4732Z Acer Aspire 4332, Aspire 4732Z Series Service Guide - Page 66

Error Messages Power-on indicator turns off and LCD is • blank. • • • Power-on indicator turns on and LCD • is blank. • • • • Power-on indicator turns on and LCD is • blank. POST is visible when using an • external CRT. • Power-on indicator turns on and a • blinking cursor is during POST. • Failure Fixed Disk • • • • No beep, power-on indicator turns off and • LCD is blank. • • • No beep, power-on indicator turns on and • LCD is blank. • • • • • No beep, power-on indicator turns on and • LCD is blank. But you can see POST on an • external CRT. • No beep, power-on indicator turns on and a • blinking cursor shown on LCD during • POST. No beep during POST but system runs • correctly. • Check or do the following in sequence: Power source (battery pack and power adapter.) See "Power System Check" section on page 64. Make sure all connectors are connected tightly and correctly. Reinstall the DIMM. Mainboard Power source (battery pack and power adapter.) See "Power System Check" section on page 64. Reconnect the LCD cable Hard disk drive LCD panel Mainboard Reconnect the LCD cable. LCD panel Mainboard Make sure all connectors are connected tightly and correctly. Mainboard Reconnect the HDD connector. Select "Load Setup Defaults" in the BIOS Setup Utility's Exit menu. Hard disk drive Mainboard Power source (battery pack and power adapter). See "Power System Check" on page 64 Make sure all connectors are connected tightly and correctly. Reconnect the DIMM. Mainboard Power source (battery pack and power adapter). See "Power System Check" on page 64 Reconnect the LCD cable. Hard disk drive LCD cable LCD panel Mainboard Reconnect the LCD cable. LCD panel Mainboard Make sure all connectors are connected tightly and correctly. Mainboard Speaker Mainboard 58 Acer Aspire 4732Z/4332 Service Guide