Acer Aspire 5349 Aspire 5349, 5749, 5749Z Service Guide - Page 89

Machine Maintenance Procedures Introduction 0 This chapter contains general information about the computer, a list of tools needed to do the required maintenance and step by step procedures on how to remove and install components from the computer. General Information 0 The product previews seen in the following procedures may not represent the final product color or configuration. Cable paths and positioning may also differ from the actual model. During the removal and installation of components, make sure all available cable channels and clips are used and that the cables are installed in the same position. All prerequisites must be completed prior to starting maintenance. Recommended Equipment 0 The following equipment are recommended to do the following maintenance procedures: Wrist grounding strap and conductive mat Flat screwdriver Philips screwdriver Plastic tweezers Flat plastic pry Table 3-1. Screw List Size M2.5*6.0 M2.5*3.5 M2.0*3.0 M2.5*4.0 M2.0*5.0 M3.0*3.5 Quantity 24 6 18 6 4 2 Acer Part No. MM25060IL69 MM25035ICI4 MS20030ILX1 MM25040IL60 MS20050I028 MS30035I354 Machine Maintenance Procedures 3-5