Acer Aspire M1610 Aspire M1610-Veriton M261 Service Guide - Page 45

PC Health Status The following screen shows the PC Health Status parameters and their default settings: Phoenix - AwardBIOS CMOS Setup Utility PC Health Status CPU Warning Temperature CPU Shutdown Temperature [70°C/150°F] [90°C/194°C] Item Help SYS Shutdown Temperature [70°C/150°F] Menu Level X CPU Core Voltage 1.28V DIMM Voltage 1.77V +3.3V 11.84V +5.0V 4.91V +12V 11.96V CPU Temperature 21°C SYS Temperature 36°C CPU Fan Speed 881 RPM SYS Fan Speed 919 RPM Smart FAN Control [Enabled] KLIJ :Move Enter: Select +/-/PU/PD :Value F10: Save and Exit ESC:Exit F1: General Help F5: Previous Values F7: Optimized Defaults The following table describes the parameters found in this menu: Parameter CPU Warning Temperature CPU Shutdown Temp. SYS Shutdown Temp. CPU Core Voltage to SYS Fan Speed Smart FAN Control Description Options This item lets you select the temperature at which you want the system to send out a warning message to the PC speakers of when the temperature goes beyond either limit. Disabled This option is for setting the shutdown temperature level for the processor. When the processor reaches the temperature you set, the system will be shut down. This option is for setting the shutdown temperature level for the system. When the system reaches the temperature you set, the ACPI-aware system will be shut down. These items in light blue show various current system voltage, temperature, and speed measurements. These items are read only and cannot be altered. Enable smart fan control function. --When the CPU temperature is higher than 65 degrees Celsius, CPU fan will run at full speed. --The speed of CPU fan will increase linearly depend on the temperature if the temperature is more than 41 degree and less than 65 degree. --When the CPU temperature is lower than 40 degrees Celsius, CPU fan will be disable. Enabled Disabled Chapter 2 37