Acer Aspire M1610 Aspire M1610-Veriton M261 Service Guide - Page 60

Reassembly Procedure Aspire M1610/Veriton M261 Reassembly NOTE: The only physical difference between the two models is the front bezel as shown in the procedures. 1. Install the Power-supply by fitting the Power-supply into the chassis, then fasten the four screws shown. 2. Install the mainboard by aligning the I/O connector with the chassis, making sure the M/B VIA hole fits the oriented STAND OFF on the chassis. Insert the 6 screws to hold the M/B in place as shown. 3. Install the CPU. 52 Chapter 3