Acer Aspire T320 Aspire T320 Service Guide - Page 42

Parameter Description Options Power On by Ring An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft off state. Enabled Disabled USB KB Wake-Up From S3 This option allows you to specify whether the system will be awakened from power saving modes when activity or input signal of the specified hardware peripheral or component is detected. Enabled Disabled Resume by Alarm When set to Enabled, the following three fields become available: Month Alarm, Day of Month Alarm, and Time Alarm Upon arrival of the alarm time, it will instruct the system to wake up. Enabled Disabled Reload Global Timer Events Primary IDE 0 Primary IDE 1 Secondary IDE 0 Secondary IDE 1 When this item is enabled, the system power will resume the system from a power saving mode if there is any activity on primary or secondary IDE channels 0 or 1. Enabled Disabled FDD,COM,LPT Port PCI PIRQ [A-D]# PWRON After PWR-Fail When this item is enabled, the system will restart the power-saving time-out counters when any activity is detected on the floppy disk drive, serial ports, or the parallel port. Enabled Disabled When this item is enabled, any activity from one Enabled of the listed devices wakes up the system. Disabled This item specifies when your system reboot after a power failure or interrupt occurs. Off On Former-Sts Chapter 2 35