Home » Acer Manuals » Desktops » Acer Aspire T320 » Manual Viewer

Acer Aspire T320 Aspire T320 Service Guide - Page 53

Standard Disassembly Procedure, Removing the Front Panel, Removing the Cables, Opening the System

Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Standard Disassembly Procedure This section tells you how to disassemble the system when you need to perform system service. Please also refer to the disassembly video, if available. CAUTION: Before you proceed, make sure you have turned off the system and all peripherals connected to it. Opening the System 1. Place the system unit on a flat, steady surface. 2. Turn the housing back, and remove the screws as shown here. 3. Slide the side door out. Then remove it. Removing the Front Panel 1. Release the six latches behind the front bezel. 2. Remove the bezel by following the instruction below. Removing the Cables 1. Disconnect the Aux-In cable. 46 Chapter 3

Section	Page
Aspire T320	1
Revision History	2
Copyright	3
Disclaimer	3
Conventions	4
Preface	5
T.O.C	6
CH1_System Specifications	8
Overview	8
Features & Specifications	9
Aspire T320 Front Panel	11
Aspire T320 Rear Panel	12
MainBoard Layout	13
Block Diagram	15
Hardware Specifications and Configurations	16
Power Management Function	23
CH2_System Utilities	24
Entering Setup	25
Product Information	27
Standard CMOS Features	28
Advanced BIOS Features	30
Advanced Chipset Features	33
Integrated Peripherals	35
OnChip IDE Device	36
Onboard Device	38
Super IO Device	39
Power Management Setup	40
PnP/PCI Configuration	43
PC Health Status	44
Frequency/Voltage Control	45
Load Default Settings	46
Set Supervisor/User Password	47
Save & Exit Setup	48
Exit Without Saving	49
CH3_Machine Disassembly and Replacement	50
General Information	51
Before You Begin	51
Disassembly Flow Chart	52
Standard Disassembly Procedure	53
Removing the Front Panel	53
Removing the Cables	53
Removing the Modem card, CD-ROM, Floppy and HDD	54
Removing the Power Supply	55
Removing the Heatsink and the CPU	56
Removing the Memory	56
Removing the Mainboard	57
Removing the Power Button	57
Removing the LED Module	57
Removing the Daughter Board	57
Standard Reassembly Procedure	58
Installing the Daughter Board	58
Installing the LED Module	58
Installing the Power Button	58
Installing the Mainboard	58
Installing the Heatsink and the CPU	59
Installing the Memory	59
Installing the Power Supply	60
Installing the Modem card, CD-ROM, Floppy and HDD	60
Installing the Cables	61
Installing the Front Panel	62
Closing the System	62
CH4_Troubleshooting	63
Power-On Self-Test (POST)	64
POST Check Points	65
POST Error Messages List	71
Error Symptoms List	73
CH5_Jumper and Connector Information	78
Checking Jumper Settings	78
Setting Jumpers	78
Connectors and Jumpers	79
Function Definition	80
Pin Definition	81
Jumper Setting	81
Connectors and Headers Definition	81
Expansion I/O	84
CH6_FRU (Field Replaceable Unit) List	87
Exploded Diagram	88
Parts	89
AppB_Test Compatible Components	97
Microsoft Windows XP Home Environment Test	98

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.