Acer TravelMate 5760 Acer TravelMate 5760 Notebook Service Guide - Page 97

Machine Maintenance Procedures Introduction 0 This chapter contains general information about the notebook, a list of tools needed to perform the required maintenance and step by step procedures on how to remove and install components from the notebook computer. General Information 0 The product previews seen in the following procedures may not represent the final product color or configuration. Cable paths and positioning may also differ from the actual model. During the removal and installation of components, make sure all available cable channels and clips are used and that the cables are installed in the same position. All prerequisites must be performed prior to performing maintenance. Recommended Equipment 0 The following tools are required to perform maintenance on the notebook: Wrist grounding strap and conductive mat Flat screwdriver Philips screwdriver Screw Table 0 The following screw table provides a list of all required screws to assemble the computer. Table 1-1. Main Screw List Screw Name Quantity M2.5x5.0 22 M2.0x3.0Ni 7 M2.0x2.0 9 M2.0x3.0 7 M2.0x1.0 4 M2.0x4.0Ni 4 Machine Maintenance Procedures 3-5