Acer X193 X183H / X193HQ Service Guide - Page 13
No1~2 screw size=M3x6; Torque=9~10KGFxCM. - lcd
View all Acer X193 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
12 ACER X193HQ Go to cover page 4. Assembly and Disassembly Procedures 4.1 Assembly procedures: Connect the cable between power board(P802) S1 and interface board (P301) Connect the function key cable into interface board(P304) Connect the FFC cable into interface board Take the key function cable out from the hole S4 shown as photo Fix the function key cable with a PVC tape P304 P301 FFC P802 Use a Phillips-head screwdriver screwed the S2 No.1~4 screws till that power board and bracket chassis base firmly attached.(No1~3 screw size=M3x6; No4 screw size=M4x8; Torque=9~10KGFxCM). 1 2 Turn the monitor faced down and put it on the S5 bracket chassis module till both parts firmly Connect FFC cable to LCD panel. There are two locks over here when plugging in should be noticed 3 4 Use a Phillips-head screwdriver screwed the S3 No.1~2 screws till that interface board and bracket chassis base firmly attached. (No1~2 screw size=M3x6; Torque=9~10KGFxCM). 1 2 Plug in parallel direction Angel < 5 degrees