Acer X193 X183H / X193HQ Service Guide - Page 14
Take a key function board to hook with front, bezeland connect to key function cable.
View all Acer X193 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
4. Assembly and Disassembly Procedures (continued) ACER X193HQ 13 Go to cover page Take lamp cables out from the holes shown as the S6 photo. S10 Put a rear cover on the assembled unit and press on force mechanisms locked and firmly attached. Plug 2 lamp cables to the connectors of inverter S7 board. 4 4 3 3 2 2 1 1 S11 Use a Phillips-head screwdriver screw 1 screw (No1 Screw Size=M4x10; Torque=7.5~9.5KGFxCM). 1 Use a Hex-head and Phillips-head screwdriver S8 screwed the DVI and D-SUB connectors (No.1~4 Hex Nut screws Size=M3x8;Torque=6.5±0.5KGFxCM). Torque=6.5±0.5KGFxCM). S12 Assemble the stand upper side to the rear cover through the way of screwing 4 screws till both units firmly attached. (No1~4 Screw Size=M4x10; Torque=12± 1KGFxCM). 2 1 4 3 Take a key function board to hook with front S9 bezeland connect to key function cable. 2 1 3 4 S13 Assemble the hinge cover into both two sides