Airlink AGSW2400V2 Quick Installation Guide
Airlink AGSW2400V2 Manual
 |
View all Airlink AGSW2400V2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Airlink AGSW2400V2 manual content summary:
- Airlink AGSW2400V2 | Quick Installation Guide - Page 1
Quick Installation Guide 24-Port 10/100/1000Mbps Green Switch Model# AGSW2400 Ver. 1A - Airlink AGSW2400V2 | Quick Installation Guide - Page 2
a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the user's manual, may cause interference in which case the user will be required to correct the interference at his own expense. CE Mark Warning This is - Airlink AGSW2400V2 | Quick Installation Guide - Page 3
which helps you to extend your network structure quickly and reliably. Purpose This Quick Installation Guide tells you how to install your Switch and how to connect it to your Ethernet network. Terms/Usage In this manual, the term "Switch" (first letter upper case) refers to your 24-Port 10/100 - Airlink AGSW2400V2 | Quick Installation Guide - Page 4
1-1 Front Panel view of the Switch • 10/100/1000Mbps Ports (Port 1~24): These ports support 10/100/1000Mbps, and can operate in Half/Full Duplex transfer modes. These ports also support automatic MDI/MDI-X crossover detection, giving true "plug and play" capability. • LED Indicators: Comprehensive - Airlink AGSW2400V2 | Quick Installation Guide - Page 5
• AC Power Connector: Supports AC 100~240V, 50~60Hz. NOTICE: Do not cover or put anything on and surrounding the switch while the Switch is operating. 1.2.3 LED indicators information The front panel LEDs provide instant status feedback and help monitoring and troubleshooting when needed. Figure - Airlink AGSW2400V2 | Quick Installation Guide - Page 6
• POWER: Power Indicator LED POWER Color Green Solid The Switch is power-on Status Blinking N/A Off No power • Port 1~24 10/100/1000Mbps Status LEDs LED LINK/ ACT 10/100M LED LINK/ ACT 1000M Color Green Color Green Solid The respective port is successfully connected to the 10/100Mbps - Airlink AGSW2400V2 | Quick Installation Guide - Page 7
1.3 Technical Specifications Standards • IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE802.3ab 1000BASE-T Gbit and IEEE 802.3x Flow Control Network Cables • Ethernet (10Base-T): Cables: 2-pair UTP Cat. 3, 4, 5, Twisted Pair (UTP). Up to 100m • Fast and Giga Ethernet (100/1000Base-T): 2-pair UTP - Airlink AGSW2400V2 | Quick Installation Guide - Page 8
Data Transfer Rate** • Ethernet: 10/20Mbps - Half/Full-Duplex • Fast Ethernet: 100/200Mbps - Half/Full Duplex • Giga Ethernet 1000/2000Mbps - Half/Full Duplex Physical and Environmental • Power Input: 100~240V AC, 50~60Hz • Operation Temperature: 0 °C ~ 40°C • Storage Temperature: -20°C ~ 70°C • - Airlink AGSW2400V2 | Quick Installation Guide - Page 9
and dry place. See the Technical Specifications for the acceptable temperature and humidity operating ranges. Install the Switch on a sturdy, level surface that can support its weight. Connect the power cord to the Switch and the power outlet. The distance is no more than 182cm. Leave at least 10cm - Airlink AGSW2400V2 | Quick Installation Guide - Page 10
2.3 Rack Installation The Switch is rack-mountable and can be installed on an EIA 13-inch equipment rack. To do this, first install the mounting brackets on the Switch's side panels (one on each side), secure them with the included screws, and then use the screws provided with the equipment rack to - Airlink AGSW2400V2 | Quick Installation Guide - Page 11
3 Connecting the Switch This section describes how to connect the Switch to your 10/100/1000Mbps Ethernet network. 3.1 Connection Your network device (i.e. computer, switch, IP Camera, VoIP) can be connected to any port of the Switch via a two-pair UTP Category 5 Cable. If the LED indicators do - Airlink AGSW2400V2 | Quick Installation Guide - Page 12
-3238* Web Site: www.airlink101.com * Free Voice Technical Support is only available within the hardware warranty (1-Year Limited Warranty from trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101®. All other product or service names are the
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
Quick Installation Guide
24-Port 10/100/1000Mbps
Green Switch
Model# AGSW2400
Ver. 1A