Airlink AGSW503 Quick Installation Guide

Airlink AGSW503 Manual

Airlink AGSW503 manual content summary:

  • Airlink AGSW503 | Quick Installation Guide - Page 1
    Quick Installation Guide 5-Port 10/100/1000 Mbps Green Switch Model# AGSW503 Ver. 1A
  • Airlink AGSW503 | Quick Installation Guide - Page 2
    Introduction This Quick Installation Guide tells you how to install your 5-Port 10/100/1000Mbps Green onto your network quickly and easily. The Green EEE (Energy Efficient Ethernet) technology of AGSW503 automatically reduces the power usage when a connected port is detected inactive (idle or cable-
  • Airlink AGSW503 | Quick Installation Guide - Page 3
    Section 1 Front Panel Hardware Description LED Indicators LED Color Status On POWER Green Off On LNK/ACT Green Off Flashing Description The switch is powered on. The switch is powered off. LAN port is connected. LAN port is not connected. Transferring or receiving data. Rear Panel Item
  • Airlink AGSW503 | Quick Installation Guide - Page 4
    and moisture into the unit. If necessary, use dehumidifier to reduce humidity. Step 1 Connecting to network devices The RJ-45 ports on the switch support Auto-MDI/MDI-X function which allows using straight-through or cross-over type cables to connect this switch to workstation or hub. Connect one
  • Airlink AGSW503 | Quick Installation Guide - Page 5
    Section 3 Troubleshooting 1. Power LED is not lit • Check if the power adapter is properly connected to the power outlet. Make sure the power jack is firmly plugged
  • Airlink AGSW503 | Quick Installation Guide - Page 6
    Section 4 Technical Support E-mail: [email protected] Website: www.airlink101.com *Power savings may vary service marks are, unless noted otherwise, the trademarks and service marks of AirLink101®. All other product or service names are the property of their respective holders. AirLink101
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Quick Installation Guide
5-Port 10/100/1000 Mbps
Green Switch
Model# AGSW503
Ver. 1A